echo "LABEL=opt /opt ext2 defaults 0 1" >> /etc/fstab

sleep 60

insmod usbserial

insmod ftdi_sio

insmod pl2303_sio

/opt/etc/init.d/S59oscam restart

Bus 001 Device 001: ID 1d6b:0003

Bus 002 Device 001: ID 1d6b:0002

Bus 002 Device 002: ID 0bda:0119

USB Devices

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

      iProduct 2 Generic Platform EHCI Controller

      iSerial 1 ehci-platform

Bus 001 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC

      iProduct 2 FT232R USB UART

      iSerial 3 A8004Wwz

opkg install kmod-usb-serial-ftdi

opkg install oscam

Installing oscam (1.20-r11277-1) to root...

Downloading http://pkg.entware.net/binaries/armv7/oscam_1.20-r11277-1_armv7soft.ipk.

Installing libpcsclite (1.8.18-1) to root...

Downloading http://pkg.entware.net/binaries/armv7/libpcsclite_1.8.18-1_armv7soft.ipk.

Installing libusb-1.0 (1.0.20-1) to root...

Downloading http://pkg.entware.net/binaries/armv7/libusb-1.0_1.0.20-1_armv7soft.ipk.

Configuring libusb-1.0.

Configuring libpcsclite.

Configuring oscam 

root@unknown:/tmp/home/root# opkg install kmod-usb-serial-ftdi

Unknown package 'kmod-usb-serial-ftdi'.

Collected errors:

 * opkg_install_cmd: Cannot install package kmod-usb-serial-ftdi.

root@unknown:/tmp/home/root# opkg list-installed

entware-opt - 222108-5

findutils - 4.6.0-1

ldconfig - 2.23-6

libc - 2.23-6

libgcc - 6.3.0-6

libopenssl - 1.0.2k-1

libpcsclite - 1.8.20-1

libpthread - 2.23-6

librt - 2.23-6

libssp - 6.3.0-6

libstdcpp - 6.3.0-6

libusb-1.0 - 1.0.21-1

locales - 2.23-6

opkg - 2011-04-08-9c97d5ec-17

oscam - 1.20-r11350-1

terminfo - 6.0-1c

zlib - 1.2.11-1

root@unknown:/tmp/home/root#

2017/04/07 19:41:14 00000000 s     (main) System name    = Linux

2017/04/07 19:41:14 00000000 s     (main) Host name      = unknown

2017/04/07 19:41:14 00000000 s     (main) Release        = 2.6.36.4brcmarm

2017/04/07 19:41:14 00000000 s     (main) Version        = #3 PREEMPT Wed Mar 22 12:08:28 CET 2017

2017/04/07 19:41:14 00000000 s     (main) Machine        = armv7l

2017/04/07 19:41:14 00000000 s     (main) creating pidfile /opt/tmp/.oscam/oscam.pid with pid 3842

2017/04/07 19:41:14 00000000 s   (config) services reloaded: 0 services freed, 2 services loaded, rejected 0

2017/04/07 19:41:14 00000000 s   (config) userdb reloaded: 6 accounts loaded, 0 expired, 5 disabled

2017/04/07 19:41:14 00000000 s     (main) signal handling initialized

2017/04/07 19:41:14 00000000 s   (config) 2 service-id's loaded in 0 ms

2017/04/07 19:41:14 00000000 s      (net) monitor: initialized (fd=7, port=988)

2017/04/07 19:41:14 00000000 s      (net) newcamd: initialized (fd=8, port=10001)

2017/04/07 19:41:14 00000000 s      (net) -> CAID: 0100 PROVID: 000068, 000000

2017/04/07 19:41:14 00000000 s   (reader) reader1 [mouse] creating thread for device /dev/ttyUSB0

2017/04/07 19:41:14 00000000 s     (stat) loadbalancer: could not open /opt/tmp/.oscam/stat for reading (errno=2 No such file or directory)

2017/04/07 19:41:14 00000000 s     (main) waiting for local card init

2017/04/07 19:41:14 00BBD095 h    (webif) webif: decompressed 178663 bytes back into 433144 bytes

2017/04/07 19:41:14 00BBD095 h    (webif) HTTP Server running. ip=0.0.0.0 port=8989

2017/04/07 19:41:14 77FA906D r   (reader) reader1 [mouse] Buffers readed  0 bytes total time_us 78265

2017/04/07 19:41:14 77FA906D r   (reader) reader1 [mouse] Flush readed byte Nr 1 value 3b time_us 11322

2017/04/07 19:41:14 77FA906D r   (reader) reader1 [mouse] Buffers readed  1 bytes total time_us 91337

2017/04/07 19:41:14 77FA906D r   (reader) reader1 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)

2017/04/07 19:41:15 77FA906D r   (reader) reader1 [mouse] card detected

2017/04/07 19:41:15 77FA906D r   (reader) reader1 [mouse] Buffers readed  0 bytes total time_us 79315

2017/04/07 19:41:16 77FA906D r   (reader) reader1 [mouse] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6 

2017/04/07 19:41:16 77FA906D r   (reader) reader1 [mouse] Init card protocol T0, FI=1, F=372, D=1, N=1

2017/04/07 19:41:16 77FA906D r   (reader) reader1 [mouse] Setting baudrate to 9600 bps

2017/04/07 19:41:16 77FA906D r   (reader) reader1 [mouse] Calculated work ETU is 104.20 us reader mhz = 357

2017/04/07 19:41:17 77FA906D r   (reader) reader1 [mouse] Buffers readed  0 bytes total time_us 81186

2017/04/07 19:41:17 77FA906D r   (reader) reader1 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)

2017/04/07 19:41:18 77FA906D r   (reader) reader1 [mouse] detect seca/nagra tunneled card

2017/04/07 19:41:18 77FA906D r   (reader) reader1 [mouse] Buffers readed  0 bytes total time_us 81350

2017/04/07 19:41:19 77FA906D r   (reader) reader1 [mouse] Nagra layer found

2017/04/07 19:41:19 77FA906D r   (reader) reader1 [mouse] Rom revision: DNASP400 RevI4A

2017/04/07 19:41:19 77FA906D r   (reader) reader1 [mouse] Buffers readed  0 bytes total time_us 81307

2017/04/07 19:41:20 77FA906D r   (reader) reader1 [mouse] type: SECA, caid: 0100, serial: #########, card: Mediaguard v10.0

2017/04/07 19:41:20 77FA906D r   (reader) reader1 [mouse] Maturity level [0]= older than 0 years

2017/04/07 19:41:20 77FA906D r   (reader) reader1 [mouse] found card system seca

2017/04/07 19:41:20 77FA906D r   (reader) reader1 [seca] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1

2017/04/07 19:41:20 77FA906D r   (reader) reader1 [seca] Request provider 1

2017/04/07 19:41:21 77FA906D r   (reader) reader1 [seca] provider 1: 0000, valid: 1, name: CYFRA +, expiry date: 2017/06/03

2017/04/07 19:41:21 77FA906D r   (reader) reader1 [seca] SA: ########

2017/04/07 19:41:21 77FA906D r   (reader) reader1 [seca] PBM for provider 1: 799007c01a000

2017/04/07 19:41:21 77FA906D r   (reader) reader1 [seca] Request provider 2

2017/04/07 19:41:21 77FA906D r   (reader) reader1 [seca] provider 2: 0068, valid: 1, name: CYFRA+ 1, expiry date: 2017/05/29

2017/04/07 19:41:21 77FA906D r   (reader) reader1 [seca] SA: ########

2017/04/07 19:41:21 77FA906D r   (reader) reader1 [seca] PBM for provider 2: 8214841e00002600

2017/04/07 19:41:21 77FA906D r   (reader) reader1 [seca] Request provider 3

2017/04/07 19:41:21 77FA906D r   (reader) reader1 [seca] provider 3: 0065, valid: 0, name: CYFRA+ 2, expiry date: 1992/01/01

2017/04/07 19:41:21 77FA906D r   (reader) reader1 [seca] PBM for provider 3: 8000000000000000

2017/04/07 19:41:22 00000000 s     (main) init for all local cards done

2017/04/07 19:41:22 00000000 s (emmcache) loaded 0 emmcache records from /opt/tmp/.oscam/oscam.emmcache in 0 ms

2017/04/07 19:41:22 00000000 s (emmcache) loaded 0 emmstat records from /opt/tmp/.oscam/oscam.emmstat in 0 ms

Local Access   

HTTP Port   

80

Remote Access   

Port   

8080