|
Unable to modify Vlan
|
| simpleway |
Dodano 25-02-2013 10:22
|
User
Posty: 14
Dołączył: 28/12/2012 05:42
|
I'm using tomato-K26USB-1.28.RT-N5x-MIPSR2-106-VPN.trx on a RG-200E(BCM5358/5357), everything works well. But there's no "N"option in the Wireless Network Mode.
I try to modify nvram to make N mode work, some guys told me to use these commands below:
nvram set boardflags2=0x1000
nvram set boardflags=0x710
nvram set boardnum=45
nvram set boardrev=0x1102
nvram set boardtype=0x0550
nvram commit
The N mode appears, but new problem occured: unable to modify the Vlan settings. I changed the vlan settings, but after rebooting the vlan settings will be reset again. This problem is not exist before I modify RG-200E to RT-N10U.
Is there a way to solve this problem?
Edytowany przez simpleway dnia 27-02-2013 04:15
|
| |
|
|
| shibby |
Dodano 25-02-2013 10:40
|
SysOp
Posty: 17150
Dołączył: 15/01/2009 20:30
|
I need more info:
Is this router a Alcatel-Lucent RG200E-CA?
Has it USB port?
Has it gigabit or fastethernet switch?
How much flash and RAM has?
If i will get answers quickly then i will add support before release v107.
Router: Unifi Cloud Gateway Max
Switch: Unifi USW-Lite-16-PoE
Switch: Unifi USW-Flex-Mini - szt. 2
Wi-Fi: Unifi U6-Lite - szt. 2
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 4x 2TB SSD
VM #1: Synology SA6400
VM #2: Debian, WWW
VM #3: Home Assistant OS
|
| |
|
|
| simpleway |
Dodano 26-02-2013 09:45
|
User
Posty: 14
Dołączył: 28/12/2012 05:42
|
Cytat shibby napisał(a):
I need more info:
Is this router a Alcatel-Lucent RG200E-CA?
Has it USB port?
Has it gigabit or fastethernet switch?
How much flash and RAM has?
If i will get answers quickly then i will add support before release v107.
I'm not sure but it's probably an Alcatel-Lucent RG200E-CA, because it has an "RG200E-CA" on the brand.
It has one USB 2.0 port
It don't have gigabit netwrok
It has 16M spi flash and 64M DDR2 RAM
I delete these information by mistake before.
Edytowany przez simpleway dnia 26-02-2013 10:21
|
| |
|
|
| shibby |
Dodano 26-02-2013 10:10
|
SysOp
Posty: 17150
Dołączył: 15/01/2009 20:30
|
go go go 
Router name is the most important for me.
Router: Unifi Cloud Gateway Max
Switch: Unifi USW-Lite-16-PoE
Switch: Unifi USW-Flex-Mini - szt. 2
Wi-Fi: Unifi U6-Lite - szt. 2
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 4x 2TB SSD
VM #1: Synology SA6400
VM #2: Debian, WWW
VM #3: Home Assistant OS
|
| |
|
|
| simpleway |
Dodano 26-02-2013 10:32
|
User
Posty: 14
Dołączył: 28/12/2012 05:42
|
I made several mistakes before :( I delete the info i posted. By default, there's no "N"option in the "Wireless Network Mode".
I'm not sure but it's probably an Alcatel-Lucent RG200E-CA, because it has an "RG200E-CA" on the brand.
It has one USB 2.0 port
It don't have gigabit netwrok
It has 16M spi flash and 64M DDR2 RAM
Model in the tomato homepage is : Broadcom 12/0x058e/1/0x1153/0x710
The origial nvram setting from the cfe is:
boardflags2=0x1000
boardflags=0x710
boardnum=1
boardpwrctl=0x00000c00
boardrev=0x1153
boardtype=0x058e
Edytowany przez simpleway dnia 26-02-2013 10:41
|
| |
|
|
| shibby |
Dodano 26-02-2013 11:12
|
SysOp
Posty: 17150
Dołączył: 15/01/2009 20:30
|
Ok
Połączony z 26 luty 2013 11:29:20:
please show me also
nvram show | grep vlan
Połączony z 26 luty 2013 11:29:51:
and CPU model
Edytowany przez shibby dnia 26-02-2013 11:29
Router: Unifi Cloud Gateway Max
Switch: Unifi USW-Lite-16-PoE
Switch: Unifi USW-Flex-Mini - szt. 2
Wi-Fi: Unifi U6-Lite - szt. 2
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 4x 2TB SSD
VM #1: Synology SA6400
VM #2: Debian, WWW
VM #3: Home Assistant OS
|
| |
|
|
| simpleway |
Dodano 26-02-2013 16:05
|
User
Posty: 14
Dołączył: 28/12/2012 05:42
|
Chipset Broadcom BCM5357 chip rev 1 pkg 9 //actually it's an bcm5358 with voip features
//I didn't modify it into an RT-N10U, so it is able to modify vlan settings. I set wan and the port next to wan(which is marked as lan4) into the same vlan.
root@Tron:/tmp/home/root# cat /proc/cpuinfo
system type : Broadcom BCM5357 chip rev 1 pkg 9
processor : 0
cpu model : MIPS 74K V4.9
BogoMIPS : 249.85
cpu MHz : 500
wait instruction : no
microsecond timers : yes
tlb_entries : 64
extra interrupt vector : no
hardware watchpoint : yes
ASEs implemented : mips16 dsp
shadow register sets : 1
VCED exceptions : not available
VCEI exceptions : not available
unaligned_instructions : 0
root@Tron:/tmp/home/root# nvram show |grep vlan
lan_ifnames=vlan0 eth1
landevs=vlan0 wl0 wl1
trunk_vlan_so=0
vlan0hwname=et0
vlan0ports=2 3 4 5*
vlan0tag=0
vlan0vid=
vlan10hwname=
vlan10ports=
vlan10vid=
vlan11hwname=
vlan11ports=
vlan11vid=
vlan12hwname=
vlan12ports=
vlan12vid=
vlan13hwname=
vlan13ports=
vlan13vid=
vlan14hwname=
vlan14ports=
vlan14vid=
vlan15hwname=
vlan15ports=
vlan15vid=
vlan1hwname=et0
vlan1ports=0 1 5
vlan1vid=
vlan2hwname=
vlan2ports=
vlan2vid=
vlan3hwname=
vlan3ports=
vlan3vid=
vlan4hwname=
vlan4ports=
vlan4vid=
vlan5hwname=
vlan5ports=
vlan5vid=
vlan6hwname=
vlan6ports=
vlan6vid=
vlan7hwname=
vlan7ports=
vlan7vid=
vlan8hwname=
vlan8ports=
vlan8vid=
vlan9hwname=
vlan9ports=
vlan9vid=
wan_iface=vlan1
wan_ifname=vlan1
wan_ifnameX=vlan1
wan_ifnames=vlan1
wandevs=vlan1
wl0_vlan_prio_mode=off
wl_vlan_prio_mode=off
root@Tron:/tmp/home/root# free
total used free shared buffers
Mem: 61440 23596 37844 0 3248
-/+ buffers: 20348 41092
Swap: 0 0 0
Połączony z 26 luty 2013 16:16:56:
it's very interesting that by default nvram settings , under the WEB UI, the wan port will be recognized as port 1, lan4 as port 2, lan1 as wan. But if I modify it into RT-N10U, wan will be wan, lan1 will be port 1.
Edytowany przez simpleway dnia 26-02-2013 16:17
|
| |
|
|
| shibby |
Dodano 26-02-2013 16:39
|
SysOp
Posty: 17150
Dołączył: 15/01/2009 20:30
|
checkout PM
http://openlinksys.info/messages.php
Router: Unifi Cloud Gateway Max
Switch: Unifi USW-Lite-16-PoE
Switch: Unifi USW-Flex-Mini - szt. 2
Wi-Fi: Unifi U6-Lite - szt. 2
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 4x 2TB SSD
VM #1: Synology SA6400
VM #2: Debian, WWW
VM #3: Home Assistant OS
|
| |
|
|
| simpleway |
Dodano 27-02-2013 05:34
|
User
Posty: 14
Dołączył: 28/12/2012 05:42
|
I uploaded all the screenshots and nvram dump to you by PM.
Połączony z 28 luty 2013 11:19:26:
The latest version still have a serious problem, every time I erase the nvram, there will be no lan ports after rebooting. The only way to solve this problem is to modify vlan settings manually via Wi-fi.
Edytowany przez simpleway dnia 28-02-2013 11:19
|
| |
|
|
| shibby |
Dodano 28-02-2013 12:11
|
SysOp
Posty: 17150
Dołączył: 15/01/2009 20:30
|
can you tell me correct VLAN configuration?
This problem exist on ofw cfe or maybe on changed cfe?
Router: Unifi Cloud Gateway Max
Switch: Unifi USW-Lite-16-PoE
Switch: Unifi USW-Flex-Mini - szt. 2
Wi-Fi: Unifi U6-Lite - szt. 2
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 4x 2TB SSD
VM #1: Synology SA6400
VM #2: Debian, WWW
VM #3: Home Assistant OS
|
| |
|
|
| simpleway |
Dodano 28-02-2013 14:53
|
User
Posty: 14
Dołączył: 28/12/2012 05:42
|
Cytat shibby napisał(a):
can you tell me correct VLAN configuration?
This problem exist on ofw cfe or maybe on changed cfe?
I changed cfe into default cfe, so I just post the latest version of V107 with the default. No version gets the right vlan settings with default cfe. V106 gets the right vlan setting by setting it into RT-N10U under changed cfe(vlan0 vlan1).
// default cfe vlan1 vlan2
V107-VPN-R3 works well except I need to setup vlan via wifi before lan working. All cfe will have no lan in V107-VPN-R3 by default after erasing nvram. physical lan ports will turn into wan ports and physical wan ports turning into nothing.
The difference between changed cfe and original cfe is changed cfe will get an extra vlan(which will be conflict with another vlan).
V107-VPN-R3 is great, all features are functional. The only thing is just that it can't get the right vlan settings by itself.I post the screenshot below:
simpleway załączono następujące plik:
Nie masz uprawnień, by zobaczyć załączniki w tym wątku.
|
| |
|
|
| shibby |
Dodano 28-02-2013 15:14
|
SysOp
Posty: 17150
Dołączył: 15/01/2009 20:30
|
ok i this i got it. Please give me a moment.
Router: Unifi Cloud Gateway Max
Switch: Unifi USW-Lite-16-PoE
Switch: Unifi USW-Flex-Mini - szt. 2
Wi-Fi: Unifi U6-Lite - szt. 2
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 4x 2TB SSD
VM #1: Synology SA6400
VM #2: Debian, WWW
VM #3: Home Assistant OS
|
| |
|
|
| simpleway |
Dodano 28-02-2013 15:24
|
User
Posty: 14
Dołączył: 28/12/2012 05:42
|
Thank you shibby for being so patient. You help me a lot. |
| |
|
|
| shibby |
Dodano 28-02-2013 15:28
|
SysOp
Posty: 17150
Dołączył: 15/01/2009 20:30
|
you can also detect leds (if they don`t work correct and buttons
http://dd-wrt.com/wiki/index.php/Broadcom_detection#We_finally_installed_DD-WRT_but_no_button.2Fled_working
Router: Unifi Cloud Gateway Max
Switch: Unifi USW-Lite-16-PoE
Switch: Unifi USW-Flex-Mini - szt. 2
Wi-Fi: Unifi U6-Lite - szt. 2
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 4x 2TB SSD
VM #1: Synology SA6400
VM #2: Debian, WWW
VM #3: Home Assistant OS
|
| |
|
|
| simpleway |
Dodano 28-02-2013 16:30
|
User
Posty: 14
Dołączył: 28/12/2012 05:42
|
here's the result, I think changed cfe would be OK with it. But most people use the cfe with vlan1 & vlan2. I think maybe it can delete vlan2 for the first boot :-)
simpleway załączono następujące plik:
Nie masz uprawnień, by zobaczyć załączniki w tym wątku.
|
| |
|
' target='_blank'>Link
