|
Linksys E2500 - pytanie o 5GHz
|
| Qrczak |
Dodano 13-12-2012 21:04
|
User
Posty: 1
Dołączył: 09/03/2007 18:40
|
Witam,
mam gorącą prośbę o poradę. Właśnie kupiłem router linksys E2500.
Mam kattę wifi Intel(R) Wireless WiFi Link 4965AGN, która wg opisu obsługuje kanały na 5Ghz.
Router też to potrafi. ale wydaje mi się że to nie działa. Laptop nie widzi drugiej sieci
skonfigurowanej w routerze dla 5Ghz
Mam program inSSIDer i on też nie pokazuje nić dla 5Ghz
macie jakieś wskazówki. Jak się upewnić że działa lub nie działa.
Czy jest tomato na ten router i co bym dzięki temu uzyskał ( używam sieci tylko w domu praktycznie
tylko poczta i www)
Pozdrawiam
Edytowany przez Qrczak dnia 13-12-2012 21:35
|
| |
|
|
| shibby |
Dodano 14-12-2012 08:22
|
SysOp
Posty: 17109
Dołączył: 15/01/2009 20:30
|
tomato jest i od wersji v104 wspiera radio 5GHz (tylko moje).
tak, ta karta wspiera 5GHz i to do 300Mbps.
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 3x 2TB SSD, Intel X710-DA2 SFP+
VM Router: OpenWRT 22.03.4
VM NAS: Synology SA6400
VM VPS: Debian, WWW, Home Assistant
Switch: Netgear MS510TXPP
Switch: Ubiquiti USW-Flex-mini - szt. 2
Wi-Fi: Ubiquiti U6-Lite - szt. 2
|
| |
|
|
| ihx |
Dodano 24-02-2013 14:44
|
User
Posty: 3
Dołączył: 24/02/2013 13:58
|
Hello,
sorry I don't know polish so I'm writing english.
I installed Tomato Firmware 1.28.0000 MIPSR2-106 K26 USB Max into Linksys E2500, configured everything I needed. From sudden moment, the Wireles 5Ghz / eth2 has gone from the settings - I cannot see it in the Status->Overview, I cannot set it in Advanced->Wireless, everywhere is shown just Wireless 2.4Ghz / eth1. It looks like the 5Ghz has gone:
I tried restoring the router default configuration, but it didn't help. Where can be the problem, is there a possibility to turn off the 5Ghz module? I checked every setting in the menu, I didn't find this option :o
Thanks for help! |
| |
|
|
| Pirek |
Dodano 24-02-2013 15:35
|
Power User
Posty: 293
Dołączył: 12/06/2006 01:35
|
look for Basic -> Network and this firmware http://tomato.groov.pl/download/K26RT...06-Max.bin
check off - After flashing, erase all data in NVRAM memory
Edytowany przez Pirek dnia 24-02-2013 15:54
Asus RT-N16 [B4] Tomato v1.28 K26 USB K26 123 EN-AIO
|
| |
|
|
| ihx |
Dodano 24-02-2013 19:14
|
User
Posty: 3
Dołączył: 24/02/2013 13:58
|
Pirek - thanks for answer. I tried it, but it didn't help. One and only solution which helped was to reflash the latest firmware with erasing NVRAM after flashing. After that I set up the router again and everything works fine  |
| |
|
|
| Pirek |
Dodano 24-02-2013 19:23
|
Power User
Posty: 293
Dołączył: 12/06/2006 01:35
|
Cytat ihx napisał(a):
Pirek - thanks for answer. I tried it, but it didn't help. One and only solution which helped was to reflash the latest firmware with erasing NVRAM after flashing. After that I set up the router again and everything works fine
In administration-> upgrade - upload this firmware http://tomato.groov.pl/download/K26RT...0E-series/ for E2500 and check off - After flashing, erase all data in NVRAM memory - it is especially for E 2500
Asus RT-N16 [B4] Tomato v1.28 K26 USB K26 123 EN-AIO
|
| |
|
|
| herrdude |
Dodano 10-03-2013 21:39
|
User
Posty: 3
Dołączył: 10/03/2013 21:34
|
Hi,
I followed your instructions and installed the firmware you recommended. I have the same problem as the OP. We had a power outage and when the router came back on we lost the 5ghz profile. I only see the 2.4ghz profile now.
When I installed your firmware I allowed data to be sent to your database.
Any ideas where the 5ghz profile went?
Thanks! |
| |
|
|
| Pirek |
Dodano 10-03-2013 22:03
|
Power User
Posty: 293
Dołączył: 12/06/2006 01:35
|
Cytat herrdude napisał(a):
Hi,
I followed your instructions and installed the firmware you recommended. I have the same problem as the OP. We had a power outage and when the router came back on we lost the 5ghz profile. I only see the 2.4ghz profile now.
When I installed your firmware I allowed data to be sent to your database.
Any ideas where the 5ghz profile went?
Thanks!
v.108 is ready - http://tomato.groov.pl/download/K26RT...0E-series/
in tools->system :
Cytat nvram show | grep eth
if eth2 is 5GHz then
Cytat
wlconf eth2 stop
wlconf eth2 down
wlconf eth2 up
wlconf eth2 start
Edytowany przez Pirek dnia 11-03-2013 09:56
Asus RT-N16 [B4] Tomato v1.28 K26 USB K26 123 EN-AIO
|
| |
|
|
| herrdude |
Dodano 10-03-2013 22:41
|
User
Posty: 3
Dołączył: 10/03/2013 21:34
|
I am guessing that wl1_ifname=eth2 is the 5ghz radio.
I entered those commands but it didn't bring back the 5ghz... |
| |
|
|
| Pirek |
Dodano 11-03-2013 09:55
|
Power User
Posty: 293
Dołączył: 12/06/2006 01:35
|
Cytat herrdude napisał(a):
I am guessing that wl1_ifname=eth2 is the 5ghz radio.
I entered those commands but it didn't bring back the 5ghz...
upgrade to v.108 and erase NVRAM memory
Asus RT-N16 [B4] Tomato v1.28 K26 USB K26 123 EN-AIO
|
| |
|
|
| herrdude |
Dodano 11-03-2013 11:27
|
User
Posty: 3
Dołączył: 10/03/2013 21:34
|
Ok, I did that and it fixed it for now. If it happens again. I will let you know.
Thanks for everything. It is great firmware! |
| |
|
' target='_blank'>Link
