Prawie tzn skanuje ale przez polecenia w putty. Logujemy się na router i przechodzimy do folderu gdzie mają trafić skany np
cd /tmp/mnt
Następnie zgodnie z komendami wyświetlonymi w help'ie w celu sprawdzenia czy rozpozna skaner wpisujemy
scanimage -L
rozpoznało urządzenie inne niż moje ale to nie problem
device `epson2:libusb:001:004' is a Epson CX8400 flatbed scanner
W celu skanowania wpisujemy np
scanimage --batch-count=2 --batch-prompt --format=tiff --mod
e Color --resolution 100
i wciskamy enter. Komenda --batch-prompt potrzebna jest żeby można było zmienić skanowany dokument. Mała niedogodność to spora waga skanów.
Mam natomiast problem z uruchomieniem programu xsane.exe na windowsie(xp). Po skonfigurowaniu wg opisu ze strony dostaję komunikat no devices available . Raz udało mi się uruchomić ale w oknie wyboru urządzenia były tylko urządzenia wirtualne do testu. W każdym bądź razie działa.
WRT-54GL + memory mod + USB + Tomato -127 K26 USB WRT-54G v5 + DD-WRT WRT-54G v1.1 +DD-WRT
FreeNAS 9.2.1.7
Start image acquisition on a scanner device and write image data to
standard output.
Parameters are separated by a blank from single-character options (e.g.
-d epson) and by a "=" from multi-character options (e.g. --device-name=epson).
-d, --device-name=DEVICE use a given scanner device (e.g. hp:/dev/scanner)
--format=pnm|tiff file format of output file
-i, --icc-profile=PROFILE include this ICC profile into TIFF file
-L, --list-devices show available scanner devices
-f, --formatted-device-list=FORMAT similar to -L, but the FORMAT of the output
can be specified: %d (device name), %v (vendor),
%m (model), %t (type), %i (index number), and
%n (newline)
-b, --batch[=FORMAT] working in batch mode, FORMAT is `out%d.pnm' or
`out%d.tif' by default depending on --format
--batch-start=# page number to start naming files with
--batch-count=# how many pages to scan in batch mode
--batch-increment=# increase page number in filename by #
--batch-double increment page number by two, same as
--batch-increment=2
--batch-prompt ask for pressing a key before scanning a page
--accept-md5-only only accept authorization requests using md5
-p, --progress print progress messages
-n, --dont-scan only set options, don't actually scan
-T, --test test backend thoroughly
-A, --all-options list all available backend options
-h, --help display this help message and exit
-v, --verbose give even more status messages
-B, --buffer-size=# change input buffer size (in kB, default 32)
-V, --version print version information
Options specific to device `pixma:04A91716_000000':
Scan mode:
--resolution auto||75|150|300|600|1200dpi [75]
Sets the resolution of the scanned image.
--mode auto|Color|Gray [Color]
Selects the scan mode (e.g., lineart, monochrome, or color).
--source Flatbed [Flatbed]
Selects the scan source (such as a document-feeder).
--button-controlled[=(yes|no)] [no]
When enabled, scan process will not start immediately. To proceed,
press "SCAN" button (for MP150) or "COLOR" button (for other models).
To cancel, press "GRAY" button.
Gamma:
--custom-gamma[=(auto|yes|no)] [yes]
Determines whether a builtin or a custom gamma-table should be used.
--gamma-table auto|0..255,...
Gamma-correction table. In color mode this option equally affects the
red, green, and blue channels simultaneously (i.e., it is an intensity
gamma table).
Geometry:
-l auto|0..216.069mm [0]
Top-left x position of scan area.
-t auto|0..297.011mm [0]
Top-left y position of scan area.
-x auto|0..216.069mm [216.069]
Width of scan-area.
-y auto|0..297.011mm [297.011]
Height of scan-area.
Buttons:
--button-update
Update button state
--button-1 [0]
Button 1
--button-2 [0]
Button 2
Type ``scanimage --help -d DEVICE'' to get list of all options for DEVICE.
List of available devices:
pixma:04A91716
może jakieś wskazówki?
Edytowany przez jarekm95 dnia 10-09-2012 17:15
Polecenia wydajemy w putty. Po zalogowaniu na router przechodzimy do folderu gdzie mają trafić skany. Rozumiem, że masz podzieloną pamięć na partycje, chociaż na opt też można. Jeśli skanujesz często możesz utworzyć folder na skany żeby nie robić bałaganu. Wpisujemy np
cd /opt
dla zeskanowania jednej strony
scanimage --batch-count=1 --format=tiff --mod
e Color --resolution 100
i wciskamy enter resolution możesz wpisać inne wartości w zależności jaką rozdzielczość potrzebujesz
Jak masz więcej stron np 5 do zeskanowania w linii poleceń wpisz
scanimage --batch-count=5 --batch-prompt --format=tiff --mod
e Color --resolution 100
Wciskasz enter i czekasz aż zeskanuje, zmieniasz kartkę i kolejny enter itd.
WRT-54GL + memory mod + USB + Tomato -127 K26 USB WRT-54G v5 + DD-WRT WRT-54G v1.1 +DD-WRT
FreeNAS 9.2.1.7
Nie sprawdzalem skoro konsola nie działa. Lepiej zrob sobie udostepniony folder na skany i ktoras z opcji:
-skrypcik np w bat albo vbs do skanowania.
-przycisk na drukarce jesli w epsonie sie da (bo w moim canonie jest taka mozliwosc jak widzisz).
-przycisk pilota jesli masz
-przycisk na routerze (też jeśli masz)
· Łącznie użytkowników: 24,115 · Najnowszy użytkownik: Ja
Czat
Musisz się zalogować, aby opublikować wiadomość.
Adooni
26-04-2024 14:41
jaki router RMerlin nie pociagne, tomato/ openwrt tak non hilink,
tamtosiamto
23-04-2024 12:35
modem bez smilocka?
man1
22-04-2024 23:27
Czy próbował ktoś uzywac karty voice (z nolimit GB) od tmobile w modemie /routerze? Da się jakoś to zrobić? Bo u mnie neta brak. E3372
tamtosiamto
31-03-2024 12:54
Wesolego jajka wszytskim forumowiczom
tamtosiamto
28-03-2024 23:24
tak, tak zgadza sie, ale ja pytam o wykluczenie noda na guest network w first set, i to nie dziala
Adooni
24-03-2024 13:16
Guest network is currently designed to allow the first set of each band (2.4G, 5G, 5G-1) available to the AiMesh node
tamtosiamto
24-03-2024 03:03
ale w 1 jest opcja do wyboru - dla calej sieci albo rutera only i wlasnie o tym mowie, ze nie dziala
Adooni
23-03-2024 16:31
w dokumencie asusa jest ze wlasnie dla 1 ma dzialac na nodach tez
tamtosiamto
23-03-2024 15:39
tak, ale nie zmienia to faktu, ze w pierwszej nie dziala wylaczanie aimesh dla goscinnej( a powinno), czyli jest jakis bug. Mam start soft, bo to dsl-ac68 ktory nie jest juz updateowany
Adooni
22-03-2024 18:07
nie, 1 wsza bedzie wszedzie trzeba 2ga zrobic dla kazdego pasma te nie sa przenoszone