Booting...
========== SPI =============
SDRAM CLOCK:156MHZ

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@
@ chip__no chip__id mfr___id dev___id cap___id size_sft dev_size chipSize
@ 0h c22016h c2h 20h 16h 0h 16h 400000h
@ blk_size blk__cnt sec_size sec__cnt pageSize page_cnt chip_clk chipName
@ 10000h 40h 1000h 400h 100h 10h 4eh MX25L3205D
@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

---RealTek(RTL8196C)at 2011.06.07-19:36+0800 version v1.1g [16bit](390MHz)

####return_addr: 0x05010000, root_bin_offset: 0x050d8012
Jump to image start=0x80500000...
decompressing kernel:
Uncompressing Linux... done, booting the kernel.
done decompressing kernel.
start address: 0x800034e0
RTL8192C/RTL8188C driver version 1.4 (2011-03-21)
init started: BusyBox v1.13.4 (2011-11-25 18:07:40 CST)
Init Start...
Init bridge interface...
Init Wlan application...

WiFi Simple Config v1.19 (2011.11.25-10:09+0000).

route: SIOCDELRT: No such process
iwcontrol RegisterPID to (wlan0)
IEEE 802.11f (IAPP) using interface br0 (v1.7)
Init WAN Interface...

MiniIGD v1.07 (2010.11.16-19:01+0000).

System TZ ENV = GMT-8
start infosvr
# Start wanduck!
Start httpd!

# Enable direct rule
track set ok
**** clean ip_conntrack 1 time. ****
track set ok

#

# cat /proc/cpuinfo
system type : RTL8196C
processor : 0
cpu model : 52481
BogoMIPS : 389.12
tlb_entries : 32
mips16 implemented : yes
#

# free
total used free shared buffers
Mem: 11324 9704 1620 0 804
Swap: 0 0 0
Total: 11324 9704 1620
#

# cat /proc/mtd
dev: size erasesize name
mtd0: 00010000 00001000 "boot + cfg"
mtd1: 00327fee 00001000 "root fs"
mtd2: 003f0000 00001000 "linux + root fs"
#

# ps
PID USER VSZ STAT COMMAND
1 root 1188 S init
2 root 0 SW< [kthreadd]
3 root 0 SW< [ksoftirqd/0]
4 root 0 SW< [events/0]
5 root 0 SW< [khelper]
6 root 0 SW< [async/mgr]
7 root 0 SW< [kblockd/0]
8 root 0 SW [pdflush]
9 root 0 SW [pdflush]
10 root 0 SW< [kswapd0]
11 root 0 SW< [mtdblockd]
184 root 1184 S syslogd -L
186 root 1180 S klogd
190 root 948 S udhcpd /var/udhcpd.conf
201 root 920 S iapp br0 wlan0
209 root 1216 S wscd -start -c /var/wsc-wlan0.conf -w wlan0 -fi /var/
212 root 944 S iwcontrol wlan0
235 root 944 S udhcpc -i eth1 -p /etc/udhcpc/udhcpc-eth1.pid -s /usr
242 root 1004 S miniigd -e 1 -i br0
247 root 1052 S lld2d br0
249 root 916 S reload -k /var/wlsch.conf
265 root 904 S notify_service
267 root 1660 S wanduck
269 root 2168 S httpd
270 root 1332 S infosvr br0
271 root 1192 S -/bin/sh
281 root 1188 R ps
#

# mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro,relatime)
proc on /proc type proc (rw,relatime)
ramfs on /var type ramfs (rw,relatime)
#

# busybox
BusyBox v1.13.4 (2011-11-25 18:07:40 CST) multi-call binary
Copyright (C) 1998-2008 Erik Andersen, Rob Landley, Denys Vlasenko
and others. Licensed under GPLv2.
See source distribution for full notice.

Usage: busybox [function] [arguments]...
or: function [arguments]...

BusyBox is a multi-call binary that combines many common Unix
utilities into a single executable. Most people will create a
link to busybox for each function they wish to use and BusyBox
will act like whatever it was invoked as!

Currently defined functions:
ash, bunzip2, bzcat, cat, cp, cut, date, echo, expr, false, free,
grep, gzip, halt, head, hostname, ifconfig, init, ip, kill, killall,
klogd, ln, ls, mkdir, mount, ping, poweroff, ps, reboot, renice,
rm, route, sed, sh, sleep, sync, syslogd, tail, telnetd, top, true,
umount, wc

#