Forum: [MOD] Tomato by shibby

Tomato v1.28.0005 105-PL ND USB mini-USB
root@unknown:/tmp/home/root# insmod usbserial
insmod: 'usbserial.o': module not found
root@unknown:/tmp/home/root# insmod pl2303
insmod: 'pl2303.o': module not found
root@unknown:/tmp/home/root#
Kod Pobierz kod źródłowy
Tomato v1.28.0005 105-PL ND USB mini-USB

root@unknown:/tmp/home/root#  insmod usbserial

insmod: 'usbserial.o': module not found

root@unknown:/tmp/home/root#  insmod pl2303

insmod: 'pl2303.o': module not found

root@unknown:/tmp/home/root# cd /

root@unknown:/#  insmod pl2303

insmod: 'pl2303.o': module not found

root@unknown:/# dmesg

CPU revision is: 00029007

Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.

Primary data cache 4kB, 2-way, linesize 16 bytes.

Linux version 2.4.37.11 (root@tomato) (gcc version 3.4.6) #7 2013-01-21 21:45:15                                                                                         CET

Determined physical RAM map:

 memory: 02000000 @ 00000000 (usable)

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200

CPU: BCM5365 rev 1 pkg 0 at 200 MHz

Using 100.000 MHz high precision timer.

Calibrating delay loop... 199.47 BogoMIPS

Memory: 30496k/32768k available (1475k kernel code, 2272k reserved, 100k data, 8                                                                                        4k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

Checking for 'wait' instruction...  unavailable.

POSIX conformance testing by UNIFIX

PCI: Initializing host

PCI: Fixing up bus 0

PCI: Fixing up bridge

PCI: Setting latency timer of device 01:00.0 to 64

PCI: Fixing up bus 1

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

squashfs: version 3.0 (2006/03/15) Phillip Lougher

pty: 256 Unix98 ptys configured

Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en                                                                                        abled

ttyS00 at 0xb8000300 (irq = 3) is a 16550A

ttyS01 at 0xb8000400 (irq = 3) is a 16550A

HDLC line discipline: version $Revision: 3.7 $, maxframe=4096

N_HDLC line discipline registered.

PPP generic driver version 2.4.2

MPPE/MPPC encryption/compression module registered

PPPoL2TP kernel driver, V0.15.1

PPTP driver version 0.8.5

Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0

Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0

Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0

Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0

Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0

Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0

Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0

 Amd/Fujitsu Extended Query Table v1.1 at 0x0040

 Flash Id: Vendor: 0x00c2 Device: 0x00a8

number of CFI chips: 1

cfi_cmdset_0002: Disabling fast programming due to code brokenness.

Flash device: 0x400000 at 0x1c000000

Creating 5 MTD partitions on "Physically mapped flash":

0x00000000-0x00040000 : "pmon"

0x00040000-0x003f0000 : "linux"

0x000bfc00-0x003d0000 : "rootfs"

0x003d0000-0x003f0000 : "jffs2"

0x003f0000-0x00400000 : "nvram"

sflash: found no supported devices

Initializing Cryptographic API

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 16384 buckets, 128Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

Linux IP multicast router 0.06 plus PIM-SM

ip_conntrack version 2.1 (16384 buckets, 8192 max) - 352 bytes per conntrack

ip_tables: (C) 2000-2002 Netfilter core team

ipt_account 0.1.20 : Piotr Gasidlo , http://www.barbara.e                                                                                        u.org/~quaker/ipt_account/

tomato_ct.c [Jan 21 2013 20:11:15]

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

NET4: Ethernet Bridge 008 for NET4.0

802.1Q VLAN Support v1.8 Ben Greear 

All bugs added by David S. Miller 

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 84k freed

PCI: Setting latency timer of device 00:01.0 to 64

eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.29

PCI: Setting latency timer of device 01:03.0 to 64

PCI: Enabling device 01:03.0 (0004 -> 0006)

eth1: Broadcom BCM4320 802.11 Wireless Controller 4.150.10.29

ip_conntrack_rtsp v0.01 loading

ip_nat_rtsp v0.01 loading

ip_conntrack_pptp version 1.9 loaded

ip_nat_pptp version 1.5 loaded

Algorithmics/MIPS FPU Emulator v1.5

JFFS version 1.4 [2.4], (C) 1999, 2000  Axis Communications AB  Mods by Ray Van                                                                                         Tassle

usb.c: registered new driver usbdevfs

usb.c: registered new driver hub

SCSI subsystem driver Revision: 1.00

Initializing USB Mass Storage driver...

usb.c: registered new driver usb-storage

USB Mass Storage support registered.

Journalled Block Device driver loaded

PCI: Enabling device 01:02.2 (0000 -> 0002)

ehci_hcd 01:02.2: PCI device 1106:3104

ehci_hcd 01:02.2: irq 12, pci mem c0234000

usb.c: new USB bus registered, assigned bus number 1

EHCI: Enabling VIA 6212 workarounds

ehci_hcd 01:02.2: USB 2.0 enabled, EHCI 1.00, driver 10 Dec 2004/2.4

hub.c: USB hub found

hub.c: 4 ports detected

vlan0: dev_set_allmulti(master, 1)

vlan0: dev_set_promiscuity(master, 1)

device eth0 entered promiscuous mode

device vlan0 entered promiscuous mode

device eth1 entered promiscuous mode

vlan1: dev_set_promiscuity(master, 1)

device vlan1 entered promiscuous mode

br0: port 3(vlan1) entering learning state

br0: port 2(eth1) entering learning state

br0: port 1(vlan0) entering learning state

br0: port 3(vlan1) entering forwarding state

br0: topology change detected, propagating

br0: port 2(eth1) entering forwarding state

br0: topology change detected, propagating

br0: port 1(vlan0) entering forwarding state

br0: topology change detected, propagating

br0: port 3(vlan1) entering disabled state

vlan1: Setting MAC address to  00 11 d8 8d 5a d0.

br0: port 3(vlan1) entering learning state

br0: port 3(vlan1) entering forwarding state

br0: topology change detected, propagating

hub.c: new USB device 01:02.2-2, assigned address 2

IMQ driver loaded.

        Hooking IMQ before NAT on PREROUTING.

        Hooking IMQ after NAT on POSTROUTING.

ipt_recent v0.3.1: Stephen Frost .  http://snowman.net/proje                                                                                        cts/ipt_recent/

scsi0 : SCSI emulation for USB Mass Storage devices

  Vendor: Kingston  Model: DT Micro          Rev: PMAP

  Type:   Direct-Access                      ANSI SCSI revision: 02

Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0

sda: Waiting for disc 0 to settle.

SCSI device sda: 15356160 512-byte hdwr sectors (7862 MB)

sda: Write Protect is off

Partition check:

 /dev/scsi/host0/bus0/target0/lun0: p1

WARNING: USB Mass Storage data integrity not assured, unmount it before unpluggi                                                                                        ng

USB Mass Storage device found at 2. Host: 0

EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended