|
[MOD] Tomato by shibby
|
| shibby |
Dodano 23-11-2012 13:35
|
SysOp
Posty: 17110
Dołączył: 15/01/2009 20:30
|
nie mam niestety. Daj mi dzień to ci podeślę 103kę na testy.
Router: Unifi Cloud Gateway Max
Switch: Netgear MS510TXPP
Switch: Unifi USW-Flex-Mini - szt. 2
Wi-Fi: Unifi U6-Lite - szt. 2
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 3x 2TB SSD, Intel X710-DA2 SFP+
VM #1: Synology SA6400
VM #2: Debian, WWW
VM #3: Home Assistant OS
|
| |
|
|
| jack78 |
Dodano 23-11-2012 13:48
|
OL Maniac
Posty: 1365
Dołączył: 22/04/2007 22:28
|
OK, no to czekam z niecierpliwością, a na weekend pożyczę modem 3G kumplowi na testy w jego okolicy.
Mikrotik hAP ac2
UniFi AP AC v2-OFW, UniFi AP PRO- OpenWRT,
Linksys E1000v2 - Tomato-RT-N5x-MIPSR2-116-Hyzoom.4M-Mini
Tenda AC10 - AC1200 OFW
NAS - HP Microserver Gen8 i3-3220T, 8GB RAM 5x 3TB WD RED | Xpenology
|
| |
|
|
| csmkjp |
Dodano 23-11-2012 14:13
|
User
Posty: 81
Dołączył: 28/05/2009 14:58
|
tomato-K26USB-1.28.RT-N5x-MIPSR2-pre103-VPN.trx można przetestować na Asus RT-N10U?
Edytowany przez csmkjp dnia 23-11-2012 18:28
|
| |
|
|
| evangelion69 |
Dodano 24-11-2012 01:22
|
Power User
Posty: 232
Dołączył: 05/12/2011 22:17
|
shibby, czy jest możliwe dodanie do twojego fw opcji testowania okablowania? coś w stylu tego co kiedyś miał d-link lub w formie tego co dodaje marvel do swoich kart sieciowych, chodzi o pomiar długości, zwarcia, crosy...
Coś jak to ze scr
http://screenshots.portforward.com/Dlink/DI-624S/Cable_Test.jpg
http://old.benchmark.pl/artykuly/recenzje/plyty_dla_PentiumD/ASUS_P5LD2/virtual_cable_tester2.gif
http://img210.imageshack.us/img210/2504/vct.jpg |
| |
|
|
| jack78 |
Dodano 24-11-2012 08:17
|
OL Maniac
Posty: 1365
Dołączył: 22/04/2007 22:28
|
Tę funkcje ma prawie każda płyta główna w BIOS.
Mikrotik hAP ac2
UniFi AP AC v2-OFW, UniFi AP PRO- OpenWRT,
Linksys E1000v2 - Tomato-RT-N5x-MIPSR2-116-Hyzoom.4M-Mini
Tenda AC10 - AC1200 OFW
NAS - HP Microserver Gen8 i3-3220T, 8GB RAM 5x 3TB WD RED | Xpenology
|
| |
|
|
| mat89 |
Dodano 24-11-2012 13:13
|
User
Posty: 136
Dołączył: 19/03/2012 18:37
|
Ile pokazuje wam dysk 1 TB w ext3 w Tomato mi 916 gb a w Windowsie ok 930 gb ciekawi mnie czemu tak jest |
| |
|
|
| shibby |
Dodano 24-11-2012 13:21
|
SysOp
Posty: 17110
Dołączył: 15/01/2009 20:30
|
system plików ten sam?
Router: Unifi Cloud Gateway Max
Switch: Netgear MS510TXPP
Switch: Unifi USW-Flex-Mini - szt. 2
Wi-Fi: Unifi U6-Lite - szt. 2
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 3x 2TB SSD, Intel X710-DA2 SFP+
VM #1: Synology SA6400
VM #2: Debian, WWW
VM #3: Home Assistant OS
|
| |
|
|
| mat89 |
Dodano 24-11-2012 13:38
|
User
Posty: 136
Dołączył: 19/03/2012 18:37
|
W Windowsie był ntfs podłączyłem do debiana i sformatowałem jako ext3 |
| |
|
|
| shibby |
Dodano 24-11-2012 13:48
|
SysOp
Posty: 17110
Dołączył: 15/01/2009 20:30
|
no i znasz już odpowiedź 
Router: Unifi Cloud Gateway Max
Switch: Netgear MS510TXPP
Switch: Unifi USW-Flex-Mini - szt. 2
Wi-Fi: Unifi U6-Lite - szt. 2
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 3x 2TB SSD, Intel X710-DA2 SFP+
VM #1: Synology SA6400
VM #2: Debian, WWW
VM #3: Home Assistant OS
|
| |
|
|
| mat89 |
Dodano 24-11-2012 14:21
|
User
Posty: 136
Dołączył: 19/03/2012 18:37
|
mozesz jaśniej bo nie rozumiem |
| |
|
|
| shibby |
Dodano 24-11-2012 15:18
|
SysOp
Posty: 17110
Dołączył: 15/01/2009 20:30
|
inni system plików, inny rozmiar sektora, inna ilość sektorów w klastrze i docelowo inna docelowa pojemność.
Router: Unifi Cloud Gateway Max
Switch: Netgear MS510TXPP
Switch: Unifi USW-Flex-Mini - szt. 2
Wi-Fi: Unifi U6-Lite - szt. 2
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 3x 2TB SSD, Intel X710-DA2 SFP+
VM #1: Synology SA6400
VM #2: Debian, WWW
VM #3: Home Assistant OS
|
| |
|
|
| mat89 |
Dodano 24-11-2012 16:33
|
User
Posty: 136
Dołączył: 19/03/2012 18:37
|
a to faktycznie masz racje. Ile to czlowiek sie nauczy na forum |
| |
|
|
| mosfit |
Dodano 25-11-2012 12:52
|
Super User
Posty: 425
Dołączył: 21/11/2012 06:12
|
Witam. Czy pomoże mi ktoś w przywróceniu Netgear-a wndr4500 do oryginału. Wgrałem tomato-Netgear-4500-K26USB-1.28.RT-N5x--084V-VPN ,i nie moge już nic do niego wgrać .
Proszę o pomoc |
| |
|
|
| shibby |
Dodano 25-11-2012 14:57
|
SysOp
Posty: 17110
Dołączył: 15/01/2009 20:30
|
eh gdzies ty go dorwal. Nie pamiętam zebym go publikowal.
Musisz go rozkrecic (to akurat nie problem), wpiac się kabelkem serialowym i zatrzymać bota, następnie tftpd i flaszujesz przez tftp clienta.
Router: Unifi Cloud Gateway Max
Switch: Netgear MS510TXPP
Switch: Unifi USW-Flex-Mini - szt. 2
Wi-Fi: Unifi U6-Lite - szt. 2
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 3x 2TB SSD, Intel X710-DA2 SFP+
VM #1: Synology SA6400
VM #2: Debian, WWW
VM #3: Home Assistant OS
|
| |
|
|
| mosfit |
Dodano 25-11-2012 16:20
|
Super User
Posty: 425
Dołączył: 21/11/2012 06:12
|
Oj tam . A czy jest szansa na stabilną wersje do WNDR4500. Czy raczej trzeba rozkręcać? |
| |
|
|
| ramik |
Dodano 26-11-2012 00:50
|
User
Posty: 7
Dołączył: 25/11/2012 23:05
|
Witam czy w e4200 serwer dlna wyswietla napisy w filmach? Mam najnowsze tomato wgrane.
Druga sprawa to czy z zew. dysku podpietego pod usb pod w/w ruter filmy Full HD pojda czy raczej zapomniec o takiej konfiguracji i puszczac z kompa po PS3 Media Serwer?
Wolalbym z rutera bo po ruter mam po kablu do TV a nie wi fi jak komp. |
| |
|
|
| shibby |
Dodano 26-11-2012 06:39
|
SysOp
Posty: 17110
Dołączył: 15/01/2009 20:30
|
Napisy srt tak, txt nie.
Bez problemu fimy hd chodza i to nawet po wifi. Testowalem ps3 i dlna osobiscie
Router: Unifi Cloud Gateway Max
Switch: Netgear MS510TXPP
Switch: Unifi USW-Flex-Mini - szt. 2
Wi-Fi: Unifi U6-Lite - szt. 2
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 3x 2TB SSD, Intel X710-DA2 SFP+
VM #1: Synology SA6400
VM #2: Debian, WWW
VM #3: Home Assistant OS
|
| |
|
|
| ramik |
Dodano 26-11-2012 06:47
|
User
Posty: 7
Dołączył: 25/11/2012 23:05
|
Po wi-fi tez testowalem po usb nie, a podobno z tym usb roznie bywa bo sa rozne klasy predkosci. Co musi byc spelnione zeby serwer dlna z rutera zaladowal z automatu napisy , srt juz wiem, a dalej? ta sama nazwa i w tym samym katalogu, co z polskimi znakami? |
| |
|
|
| jack78 |
Dodano 26-11-2012 10:07
|
OL Maniac
Posty: 1365
Dołączył: 22/04/2007 22:28
|
Potrzebuje pomocy w konfiguracji WL-500gP z MIPSR1-102-PL K26 USB BT-VPN i modemem hilink E3131.
Tak wyglądają logi z podłączenia modemu.
Jan 1 01:12:23 unknown user.info kernel: usb 1-1.1: new high speed USB device using ehci_hcd and address 5
Jan 1 01:12:23 unknown user.info kernel: usb 1-1.1: configuration #1 chosen from 1 choice
Jan 1 01:12:23 unknown user.info kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan 1 01:12:23 unknown user.debug hotplug[3833]: Attached USB device 1-1.1:1.0 [INTERFACE=8/6/80 PRODUCT=12d1/1f01/102]
Jan 1 01:12:25 unknown user.notice kernel: scsi 1:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
Jan 1 01:12:28 unknown daemon.err pppd[3772]: Failed to open /dev/ttyUSB0: No such device
Jan 1 01:12:29 unknown user.info redial[3778]: WAN down. Reconnecting...
Jan 1 01:12:29 unknown daemon.info dnsmasq[3712]: exiting on receipt of SIGTERM
Jan 1 01:12:29 unknown user.debug init[1]: 182: pptp peerdns disabled
Jan 1 01:12:29 unknown daemon.info dnsmasq[3851]: started, version 2.61 cachesize 1500
Jan 1 01:12:29 unknown daemon.info dnsmasq[3851]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack
Jan 1 01:12:29 unknown daemon.info dnsmasq[3851]: asynchronous logging enabled, queue limit is 5 messages
Jan 1 01:12:29 unknown daemon.info dnsmasq-dhcp[3851]: DHCP, IP range 192.168.0.2 -- 192.168.0.51, lease time 1d
Jan 1 01:12:29 unknown daemon.warn dnsmasq[3851]: no servers found in /etc/resolv.dnsmasq, will retry
Jan 1 01:12:29 unknown daemon.info dnsmasq[3851]: read /etc/hosts - 2 addresses
Jan 1 01:12:29 unknown daemon.info dnsmasq[3851]: read /etc/dnsmasq/hosts/hosts - 3 addresses
Jan 1 01:12:29 unknown daemon.info dnsmasq-dhcp[3851]: read /etc/dnsmasq/dhcp/dhcp-hosts
Jan 1 01:12:30 unknown daemon.info pppd[3772]: Terminating on signal 15
Jan 1 01:12:30 unknown daemon.info pppd[3772]: Exit.
Jan 1 01:12:30 unknown user.debug kernel: vlan1: del 33:33:00:00:00:01 mcast address from vlan interface
Jan 1 01:12:30 unknown user.debug kernel: vlan1: del 33:33:00:00:00:01 mcast address from master interface
Jan 1 01:12:30 unknown user.debug kernel: vlan1: del 01:00:5e:00:00:01 mcast address from vlan interface
Jan 1 01:12:30 unknown user.debug kernel: vlan1: del 01:00:5e:00:00:01 mcast address from master interface
Jan 1 01:12:30 unknown user.warn kernel: vlan1: Setting MAC address to 48 5b 39 e7 d9 5f.
Jan 1 01:12:30 unknown user.debug kernel: vlan1: add 01:00:5e:00:00:01 mcast address to master interface
Jan 1 01:12:30 unknown user.debug kernel: vlan1: add 33:33:00:00:00:01 mcast address to master interface
Jan 1 01:12:30 unknown user.err kernel: ipt_account [checkentry]: table found, rule network/netmask/shortlisting not match table network/netmask/shortlisting.
Jan 1 01:12:30 unknown user.crit init[1]: Error while loading rules. See /etc/iptables.error file.
Jan 1 01:12:31 unknown daemon.notice pppd[3911]: pppd 2.4.5 started by root, uid 0
Jan 1 01:12:31 unknown daemon.err pppd[3911]: Failed to open /dev/ttyUSB0: No such device
Jan 1 01:12:31 unknown user.info redial[3913]: Started. Time: 10
Jan 1 01:12:32 unknown user.notice root: 3G MODEM FOUND - 12d1:1f01 - Switching ...
Jan 1 01:12:32 unknown user.info kernel: usb 1-1.1: USB disconnect, address 5
Jan 1 01:12:32 unknown user.info kernel: usb 1-1.1: new high speed USB device using ehci_hcd and address 6
Jan 1 01:12:32 unknown user.info kernel: usb 1-1.1: configuration #1 chosen from 1 choice
Jan 1 01:12:32 unknown user.err kernel: usbserial_generic 1-1.1:1.0: Generic device with no bulk out, not allowed.
Jan 1 01:12:32 unknown user.warn kernel: usbserial_generic: probe of 1-1.1:1.0 failed with error -5
Jan 1 01:12:32 unknown user.info kernel: usbserial_generic 1-1.1:1.1: generic converter detected
Jan 1 01:12:32 unknown user.info kernel: usb 1-1.1: generic converter now attached to ttyUSB0
Jan 1 01:12:33 unknown user.debug hotplug[3983]: Attached USB device 1-1.1:1.1 [INTERFACE=10/6/0 PRODUCT=12d1/14db/102]
Jan 1 01:12:33 unknown user.debug hotplug[3982]: Attached USB device 1-1.1:1.0 [INTERFACE=2/6/0 PRODUCT=12d1/14db/102]
Jan 1 01:12:33 unknown user.notice root: 3G MODEM ready - 12d1:14db
Jan 1 01:12:33 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
Jan 1 01:12:33 unknown user.info kernel: usbcore: registered new interface driver option
Jan 1 01:12:33 unknown user.info kernel: drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.2
Jan 1 01:12:33 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra USB modem
Jan 1 01:12:33 unknown user.info kernel: usbcore: registered new interface driver sierra
Jan 1 01:12:33 unknown user.info kernel: drivers/usb/serial/sierra.c: USB Driver for Sierra Wireless USB modems: v.1.7.0
Jan 1 01:12:35 unknown user.notice root: 3G MODEM not found by cdc-acm, option or sierra module. Trying usbserial ...
Jan 1 01:12:35 unknown user.info kernel: usbcore: deregistering interface driver sierra
Jan 1 01:12:35 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial deregistering driver Sierra USB modem
Jan 1 01:12:36 unknown user.info kernel: usbcore: deregistering interface driver option
Jan 1 01:12:36 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial deregistering driver GSM modem (1-port)
Jan 1 01:12:36 unknown user.notice root: 3G MODEM - loading module usbserial
Jan 1 01:12:36 unknown user.info kernel: usbcore: deregistering interface driver usbserial_generic
Jan 1 01:12:36 unknown user.info kernel: generic ttyUSB0: generic converter now disconnected from ttyUSB0
Jan 1 01:12:36 unknown user.info kernel: usbserial_generic 1-1.1:1.1: device disconnected
Jan 1 01:12:36 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial deregistering driver generic
Jan 1 01:12:36 unknown user.info kernel: usbcore: deregistering interface driver usbserial
Jan 1 01:12:36 unknown user.info kernel: usbcore: registered new interface driver usbserial
Jan 1 01:12:36 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
Jan 1 01:12:36 unknown user.err kernel: usbserial_generic 1-1.1:1.0: Generic device with no bulk out, not allowed.
Jan 1 01:12:36 unknown user.warn kernel: usbserial_generic: probe of 1-1.1:1.0 failed with error -5
Jan 1 01:12:36 unknown user.info kernel: usbserial_generic 1-1.1:1.1: generic converter detected
Jan 1 01:12:36 unknown user.info kernel: usb 1-1.1: generic converter now attached to ttyUSB0
Jan 1 01:12:36 unknown user.info kernel: usbcore: registered new interface driver usbserial_generic
Jan 1 01:12:36 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
Jan 1 01:12:36 unknown user.notice root: 3G MODEM ready - using usbserial module
Jan 1 01:12:51 unknown user.info redial[3913]: WAN down. Reconnecting...
Jan 1 01:12:51 unknown daemon.info dnsmasq[3851]: exiting on receipt of SIGTERM
Jan 1 01:12:51 unknown user.debug init[1]: 182: pptp peerdns disabled
Jan 1 01:12:51 unknown daemon.info dnsmasq[4098]: started, version 2.61 cachesize 1500
Jan 1 01:12:51 unknown daemon.info dnsmasq[4098]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack
Jan 1 01:12:51 unknown daemon.info dnsmasq[4098]: asynchronous logging enabled, queue limit is 5 messages
Jan 1 01:12:51 unknown daemon.info dnsmasq-dhcp[4098]: DHCP, IP range 192.168.0.2 -- 192.168.0.51, lease time 1d
Jan 1 01:12:52 unknown daemon.warn dnsmasq[4098]: no servers found in /etc/resolv.dnsmasq, will retry
Jan 1 01:12:52 unknown daemon.info dnsmasq[4098]: read /etc/hosts - 2 addresses
Jan 1 01:12:52 unknown daemon.info dnsmasq[4098]: read /etc/dnsmasq/hosts/hosts - 3 addresses
Jan 1 01:12:52 unknown daemon.info dnsmasq-dhcp[4098]: read /etc/dnsmasq/dhcp/dhcp-hosts
Jan 1 01:12:52 unknown local2.err chat[4089]: SIGTERM
Jan 1 01:12:52 unknown daemon.warn pppd[3911]: Child process /usr/sbin/chat -V -t 60 -f /tmp/ppp/connect.chat (pid 4088) terminated with signal 15
Jan 1 01:12:52 unknown daemon.err pppd[3911]: Connect script failed
Jan 1 01:12:53 unknown daemon.info pppd[3911]: Exit.
Jan 1 01:12:53 unknown user.debug kernel: vlan1: del 33:33:00:00:00:01 mcast address from vlan interface
Jan 1 01:12:53 unknown user.debug kernel: vlan1: del 33:33:00:00:00:01 mcast address from master interface
Jan 1 01:12:53 unknown user.debug kernel: vlan1: del 01:00:5e:00:00:01 mcast address from vlan interface
Jan 1 01:12:53 unknown user.debug kernel: vlan1: del 01:00:5e:00:00:01 mcast address from master interface
Jan 1 01:12:53 unknown user.warn kernel: vlan1: Setting MAC address to 48 5b 39 e7 d9 5f.
Jan 1 01:12:53 unknown user.debug kernel: vlan1: add 01:00:5e:00:00:01 mcast address to master interface
Jan 1 01:12:53 unknown user.debug kernel: vlan1: add 33:33:00:00:00:01 mcast address to master interface
Jan 1 01:12:53 unknown user.err kernel: ipt_account [checkentry]: table found, rule network/netmask/shortlisting not match table network/netmask/shortlisting.
Jan 1 01:12:53 unknown user.crit init[1]: Error while loading rules. See /etc/iptables.error file.
Jan 1 01:12:54 unknown daemon.notice pppd[4158]: pppd 2.4.5 started by root, uid 0
Jan 1 01:12:54 unknown user.info redial[4160]: Started. Time: 10
Jan 1 01:12:55 unknown user.notice root: 3G MODEM already found - using usbserial module
Konfiguracja:
router 192.168.0.1
modem, wiadomo HiLink 192.168.1.1
Modem jest skonfigurowany na lapku i działa bez problemów.
Z info na stronie shibbiego wynika że 102 ma już zintegrowaną obsługę tych modemów, a mimo to nie działa mi on.
Mikrotik hAP ac2
UniFi AP AC v2-OFW, UniFi AP PRO- OpenWRT,
Linksys E1000v2 - Tomato-RT-N5x-MIPSR2-116-Hyzoom.4M-Mini
Tenda AC10 - AC1200 OFW
NAS - HP Microserver Gen8 i3-3220T, 8GB RAM 5x 3TB WD RED | Xpenology
|
| |
|
|
| shibby |
Dodano 26-11-2012 12:05
|
SysOp
Posty: 17110
Dołączył: 15/01/2009 20:30
|
nie zintegrowaną obsługę tylko zintegrowane sterowniki i data dla usb_modeswitch.
http://repo.or.cz/w/tomato.git/commit/3716ace5118a32344377297d02c1fb04dd8f3a2b
Tak więc nadal musisz ręcznie wszystko zrobić jak w tutorialu.
http://openlinksys.info/forum/viewthread.php?thread_id=15390
tyle ze nie musisz szukać modułów i daty dla usb_modeswitch bo to już jest. Zaczynasz więc o miejsca z hotplugiem a powinien on wyglądać tak:
Cytat if [ "${PRODUCT:0:4}" = "12d1" ] && [ "${PRODUCT:5:4}" = "1f01" ]; then
logger "Huawei E3131s-2 modem attached"
modprobe mii.ko
modprobe usbnet.ko
modprobe cdc_ether.ko
usb_modeswitch -c /etc/usb_modeswitch.d/12d1:1f01
fi
i dalej juz wg tutka.
Router: Unifi Cloud Gateway Max
Switch: Netgear MS510TXPP
Switch: Unifi USW-Flex-Mini - szt. 2
Wi-Fi: Unifi U6-Lite - szt. 2
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 3x 2TB SSD, Intel X710-DA2 SFP+
VM #1: Synology SA6400
VM #2: Debian, WWW
VM #3: Home Assistant OS
|
| |
|
' target='_blank'>Link
