|
[MOD] Tomato by shibby
|
| kille72 |
Dodano 30-03-2012 19:41
|
Administrator
Posty: 2986
Dołączył: 12/02/2007 23:43
|
No to super ze OpenVPN 2.2.2 dziala  Dobry tydzien Shibby! |
| |
|
|
| shibby |
Dodano 30-03-2012 19:48
|
SysOp
Posty: 17143
Dołączył: 15/01/2009 20:30
|
ano calkiem niezly i dosc gladko wszystko poszlo
Router: Unifi Cloud Gateway Max
Switch: Unifi USW-Lite-16-PoE
Switch: Unifi USW-Flex-Mini - szt. 2
Wi-Fi: Unifi U6-Lite - szt. 2
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 3x 2TB SSD
VM #1: Synology SA6400
VM #2: Debian, WWW
VM #3: Home Assistant OS
|
| |
|
|
| ldp |
Dodano 31-03-2012 12:15
|
User
Posty: 1
Dołączył: 31/03/2012 12:00
|
I don't know if this is the correct thread to post this but i have a problems with 088v build on a Asus rt-n66u (it wasn't working in 085v too).
Remote access doesn't work, remote access is enabled and i have tried http, https and different ports but it doesn't work.
current firmware: tomato-K26USB-1.28.RT-N-MIPSR2-088V-AIO
Before i had a linksys WRT54GL with tomato 1.28 and it was working, now with the new router i have tried the same settings and it doesn't work. |
| |
|
|
| anonim747874734 |
Dodano 31-03-2012 12:21
|
OL Maniac
Posty: 1219
Dołączył: 02/08/2010 18:21
|
:/ google translator... kolega wszelkie fora obtrąbił ,ze działa... |
| |
|
|
| Tommy76 |
Dodano 31-03-2012 13:03
|
User
Posty: 48
Dołączył: 22/05/2008 13:48
|
@shibby
Da radę dodać opcję "b/g protection" dla sieci bezprzewodowej tak jak np. w oryginalnym sofcie dla rt-n16?
Asus RT-N16: TomatoUSB 1.28 MIPSR2-108 K26 AIO
|
| |
|
|
| shibby |
Dodano 31-03-2012 15:46
|
SysOp
Posty: 17143
Dołączył: 15/01/2009 20:30
|
Cytat ldp napisał(a):
I don't know if this is the correct thread to post this but i have a problems with 088v build on a Asus rt-n66u (it wasn't working in 085v too).
Remote access doesn't work, remote access is enabled and i have tried http, https and different ports but it doesn't work.
current firmware: tomato-K26USB-1.28.RT-N-MIPSR2-088V-AIO
Before i had a linksys WRT54GL with tomato 1.28 and it was working, now with the new router i have tried the same settings and it doesn't work.
remote access is working. I tested on my RT-N66u with RT-N-088. Show us please a screenshot of remote configuration. Have you any router/modem before Asus? What is your WAN type?
Router: Unifi Cloud Gateway Max
Switch: Unifi USW-Lite-16-PoE
Switch: Unifi USW-Flex-Mini - szt. 2
Wi-Fi: Unifi U6-Lite - szt. 2
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 3x 2TB SSD
VM #1: Synology SA6400
VM #2: Debian, WWW
VM #3: Home Assistant OS
|
| |
|
|
| BailA |
Dodano 31-03-2012 16:16
|
User
Posty: 13
Dołączył: 18/02/2012 18:06
|
Hi,the versione testing with PPTP is this?
Tnk's |
| |
|
|
| kille72 |
Dodano 31-03-2012 20:01
|
Administrator
Posty: 2986
Dołączył: 12/02/2007 23:43
|
NO, this is a test version for Asus RT-N66 with a new OpenVPN. You have to wait for version with PPTP server. |
| |
|
|
| BailA |
Dodano 31-03-2012 20:37
|
User
Posty: 13
Dołączył: 18/02/2012 18:06
|
Cytat kille72 napisał(a):
NO, this is a test version for Asus RT-N66 with a new OpenVPN. You have to wait for version with PPTP server.
Ok,tnk's!  |
| |
|
|
| Mychu |
Dodano 01-04-2012 01:27
|
User
Posty: 7
Dołączył: 01/04/2012 01:13
|
Witajcie,
mam Netgeara WNR3500U/L z USB i WD Passport 500GB.
Problem w tym, że chcę na nim przez WIFI składować obrazy TimeMachine z mojego MacBooka. Na standardowym oprogramowaniu nie mogę tego robić bo od OSX 10.7.3 Lion Apple podniosło wersję netatalk do wersji 2.2.2. (na Snow Leopardzie działalo to super nawet na fabrycznym sofcie)
Czy po wgraniu któregoś z modów Tomato będę miał działające AFP w Lionie? Czy jest tam netatalk 2.2? Jeżeli tak, to który mod najlepiej wgrać?
Edytowany przez Mychu dnia 01-04-2012 01:44
|
| |
|
|
| kille72 |
Dodano 01-04-2012 12:33
|
Administrator
Posty: 2986
Dołączył: 12/02/2007 23:43
|
Tomato sie przestawilo na czas letni, bug sie potwierdzil ze ta niedziela zostala wykryta jako piata (ostatnia) w marcu a nie pierwsza w kwietniu Pomidor zrobil nam prima aprilis  |
| |
|
|
| shibby |
Dodano 01-04-2012 12:41
|
SysOp
Posty: 17143
Dołączył: 15/01/2009 20:30
|
nie tylko tomato. Mi dzis telefon sony ericson przestawil sie drugi raz i zamiast 10:00 pokazywal 11:00
Router: Unifi Cloud Gateway Max
Switch: Unifi USW-Lite-16-PoE
Switch: Unifi USW-Flex-Mini - szt. 2
Wi-Fi: Unifi U6-Lite - szt. 2
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 3x 2TB SSD
VM #1: Synology SA6400
VM #2: Debian, WWW
VM #3: Home Assistant OS
|
| |
|
|
| Zlikovski |
Dodano 02-04-2012 09:33
|
User
Posty: 2
Dołączył: 02/04/2012 09:19
|
Hi.
I have issue with my tomato on RT-N16.
I tried several versions from 83 - 88 and it is all same. After some time my RT-N16 lose internet connection with my cable modem.
I erased NVRAM several times and setup everything again without success.
When it lose internet I need to log in to tomato and release-renew and than again everything is working.
I have CISCO cable modem and RT-N16 connected to it.
I use tomato built-in torrent client (but just active, no seeding no DL), file sharing, QoS is off and USB HDD connected to it (and shared)
In log everything seems fine.
Appreciate any help.
Tnx. |
| |
|
|
| rtpm |
Dodano 02-04-2012 19:35
|
User
Posty: 50
Dołączył: 04/06/2009 12:53
|
When the problem appears, log in to the router (ssh, or use admin option) and check if you can reach the internet from the router. (this will eliminate NAT problem)
Show the output of the commands below:
`ip addr`
`netstat -nr`
Also check if there is no dns resolving problem (by pinging some external host by ip)
You can always check if this is not the cable modem problem by connecting your computer directly.
Netgear WNR3500Lv1 + Tomato (od Shibby)
|
| |
|
|
| lysy1033 |
Dodano 03-04-2012 12:50
|
User
Posty: 18
Dołączył: 28/03/2012 11:37
|
multi ssid będzie w standardzie w tomato by shibby? |
| |
|
|
| kille72 |
Dodano 03-04-2012 12:57
|
Administrator
Posty: 2986
Dołączył: 12/02/2007 23:43
|
Tak bedzie! MultiSSID, OpenVPN 2.2.2 i PPTP serwer, juz niedlugo |
| |
|
|
| LuCzeK |
Dodano 03-04-2012 13:04
|
User
Posty: 140
Dołączył: 30/01/2009 18:22
|
super !
jeszcze jakby kiedyś doszła opcja repeatera to by była bajka  |
| |
|
|
| lysy1033 |
Dodano 03-04-2012 13:06
|
User
Posty: 18
Dołączył: 28/03/2012 11:37
|
no to naprawdę full wypas. bardzo mi się przyda multissid dla gości w oddzielnym vlanie no po prostu bajka. pozdrawiam shibbiego. |
| |
|
|
| kille72 |
Dodano 03-04-2012 13:29
|
Administrator
Posty: 2986
Dołączył: 12/02/2007 23:43
|
@Shibby, czy Bandwidth Limiter dalej bedzie dzialac tylko dla br0? Mam na mysli MultiSSID w roznych VLANach, goscie moga zamulic caly net jak nie dziala na br1, br2 itd... |
| |
|
|
| shibby |
Dodano 03-04-2012 13:56
|
SysOp
Posty: 17143
Dołączył: 15/01/2009 20:30
|
poki co mozna się posiłkowac skryptem. Próbuję wymyśleć jak zrobić by rozszerzyć go na inne bridge.
Router: Unifi Cloud Gateway Max
Switch: Unifi USW-Lite-16-PoE
Switch: Unifi USW-Flex-Mini - szt. 2
Wi-Fi: Unifi U6-Lite - szt. 2
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 3x 2TB SSD
VM #1: Synology SA6400
VM #2: Debian, WWW
VM #3: Home Assistant OS
|
| |
|
' target='_blank'>Link
