1970/01/01 1:03:01 1011A140 r reader cyfra initialized (device=/dev/ttyS0, detect=cd, mhz=368, cardmhz=357)
1970/01/01 1:03:02 0 cyfra card detected
1970/01/01 1:03:12 1011A140 r Error activating card.
1970/01/01 1:03:23 1011A140 r Error activating card.
1970/01/01 1:03:34 1011A140 r Error activating card.

[reader]
label = cyferka
protocol = smartreader
device = 001:004
smargopatch = 1
showcls = 0
caid = 0100
detect = cd
mhz = 800
cardmhz = 357
group = 1

radomir napisał(a):



Takie same objawy miałem przy ustawieniach smargo jako MOUSE w oscam.
Karta albo wystartowała jak trzeba albo nie...
Dlatego zmieniłem na smartreader i jest ok.
Spróbuj zmienić u siebie to ustawienie i zobacz czy będzie hulać.
U mnie wygląda tak:


Do poprawnego działania trzeba wyłączyć ładowanie modułów serialusb i ftdi_sio.

1970/01/01 1:11:56 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #5961 (mips-wrt54g-linux)
1970/01/01 1:11:56 0 s version=1.20-unstable_svn, build #5961, system=mips-wrt54g-linux, nice=-10
1970/01/01 1:11:56 0 s client max. idle=120 sec, debug level=0
1970/01/01 1:11:56 0 s max. logsize=32 Kb, loghistorysize=4096 bytes
1970/01/01 1:11:56 0 s client timeout=6000 ms, fallback timeout=2500 ms, cache delay=0 ms
1970/01/01 1:11:56 0 s The current system time is smaller than the build date (Sep 28 2011). Waiting up to 60 seconds for time to correct
1970/01/01 1:12:58 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
1970/01/01 1:12:58 0 s Cannot open file "/opt/etc/oscam/oscam.services" (errno=2 No such file or directory)
1970/01/01 1:12:58 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
1970/01/01 1:12:58 0 s signal handling initialized (type=sysv)
1970/01/01 1:12:58 0 s 6548 service-id's loaded in 209ms
1970/01/01 1:12:58 0 s WARNING: You risk high CPU load and high ECM times with more than 2000 service-id´s!
1970/01/01 1:12:58 0 s HINT: --> use optimized lists from http://streamboard.gmc.to/wiki/index.php/Srvid
1970/01/01 1:12:58 0 s can't open file "/opt/etc/oscam/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
1970/01/01 1:12:58 0 s 940 provid's loaded
1970/01/01 1:12:58 0 s can't open file "/opt/etc/oscam/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
1970/01/01 1:12:58 0 s monitor: initialized (fd=7, port=9000)
1970/01/01 1:12:58 0 s camd35: disabled
1970/01/01 1:12:58 0 s cs378x: disabled
1970/01/01 1:12:58 0 s newcamd: disabled
1970/01/01 1:12:58 0 s cccam: initialized (fd=8, port=12005, crypted)
1970/01/01 1:12:58 0 s radegast: disabled
1970/01/01 1:12:58 0 s http thread started
1970/01/01 1:12:58 0 s reader check thread started
1970/01/01 1:12:58 0 s check thread started
1970/01/01 1:12:58 0 s creating thread for device /dev/ttyS0
1970/01/01 1:12:58 0 s loadbalancer: can't read from file /tmp/.oscam/stat
1970/01/01 1:12:58 0 s anti cascading disabled
1970/01/01 1:12:58 1011B850 h HTTP Server listening on port 8888
1970/01/01 1:12:58 1011A140 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
1970/01/01 1:12:58 1011A140 r recompile with SmartReader support.
1970/01/01 1:12:58 1011A140 r Cannot open devicedev/ttyS0

USB Devices
Bus 001 Device 002: ID 13fe:3e00
Bus 001 Device 001: ID 1d6b:0002

hermes-80 napisał(a):

Raz konfigurowałem C+ + smargo na RT-16N i nie było problemu - w każdym bać razie działało, a klient nie zgłaszał jakiś problemów.

http://megaupload.com/?d=YV4DIVO4

date -s "2012-01-03 23:05"

#!/bin/sh

case "$1" in
start)
echo "Starting oscam..."
insmod uhci-hcd.ko



sleep 5
oscam -b
echo " "
;;
stop)
echo -n "Stopping oscam..."
killall oscam > /dev/null
sleep 5
rmmod uhci-hcd.ko
echo " "
;;
esac
exit 0
}

Bus 002 Device 002: ID 0403:6001

[reader]
label = cyfra
protocol = smartreader
device = 002:002
smargopatch = 1
showcls = 0
caid = 0100
detect = cd
mhz = 357
cardmhz = 357
ident = 0100:000068
group = 1

lsusb

#!/bin/sh
if ps w |grep -v grep |grep -c oscam ;
then
echo `date` "Oscam dziala" >> /opt/tmp/Check_Oscam.log
else
echo `date` "Restartuje Oscam..." >> /opt/tmp/Check_Oscam.log
/opt/bin/usb-reset &
sleep 20
/bin/mount -o bind /mnt/opt/opt /opt &
sleep 5
/opt/etc/init.d/oscam start &
fi