|
oscam na openwrt (ar71xx) i tomato k2.6
|
| HarryManback |
Dodano 22-11-2011 00:20
|
User
Posty: 1
Dołączył: 24/05/2011 15:49
|
z czystej ciekawości niestety nie jestem w posiadaniu wiedzy odnośnie instalacji pakietów
a jedyna rzeczą która udało mi się zrobić to podmiana oryginalnego softu nas asusie na dd-ert , tomato etc
jedyny komunikat który dostaje to
/tmp/.wx8AbF37: line 8: ipkg: not found
Connecting to tomato.groov.pl (46.4.119.232:80)
oscam_1.00-unstable_ 0% | | 0 --:--:-- ETA
oscam_1.00-unstable_ 100% |*******************************| 355k 00:00:00 ETA
/tmp/.wx8AbF37: line 10: ipkg: not found
mój config to goły asus na Tomato Firmware PL v1.28.9054 MIPSR1-beta-036H K26 USB VPN |
| |
|
|
| DdoxD |
Dodano 22-11-2011 14:48
|
User
Posty: 158
Dołączył: 12/10/2008 16:17
|
Cytat pawelsonx napisał(a):
problem tylko mam że tp-link ma jedno wyjście USB a ja potrzebuje więcej niż 4 porty
znalazłem 7 portowy co ma napisane że działa na Linux 2.4.2
Bedziesz wgrywal tomato z jadrem 2.6 wiec szukaj zgodnego z tym jadrem i daj znac jak dziala 7 portow bo ja mialem problemy.
Asus RT-N16 Tomato Firmware 1.28.0000 MIPSR2-108 K26 USB Nocat-VPN
TP Link WAG501G WPA2 acces point dla RT-N16
|
| |
|
|
| Kerami82 |
Dodano 26-11-2011 07:25
|
User
Posty: 32
Dołączył: 14/07/2011 09:21
|
Mało się w tym temacie dzieje. Jeszcze raz proszę o informacje od osób które mają firmware od shibiiego w rt-n16 czy działa komus dobrze oscam. Widziałem sporo binarek oscama pod dd-wrt i nie wiem czy to kwestia Tomato że mi się oscam wywala czy po prostu nie umiem skonfigurować. Prosze o odpowiedzi. |
| |
|
|
| blackangel |
Dodano 30-11-2011 21:33
|
User
Posty: 47
Dołączył: 07/02/2009 15:36
|
a mi wywalało segmentaion fault, ściągnełem samąbinarke z streamboard i teoretycznie powino działać oscam -h pokazuje help ale jak odpalam nie ma nic kompletnie nic i w procesach też nie widać :/ używam tomato mod by thor v6 |
| |
|
|
| robo1973 |
Dodano 07-12-2011 18:56
|
User
Posty: 8
Dołączył: 27/06/2011 22:16
|
Czesc !!! Może ktoś luknąć w konfigi czytnika cp bo jakiś mi na
oscam_5542 systematycznie przycina
[reader]
label = polsat
Protocol = mouse
device = /dev/ttyUSB0
group = 1
rsakey = xxxxx
boxkey = xxxxxx
caid = 1803:1801,1801
fix9993 = 0
detect = cd
mhz = 368
cardmhz = 368
ident = 000000,007101,007001
emmcache = 1,3 |
| |
|
|
| TheWB |
Dodano 08-12-2011 21:20
|
Power User
Posty: 219
Dołączył: 16/02/2011 13:38
|
oscam.serwer
[reader]
label = polsat
protocol = mouse
device = /dev/ttyUSB0
caid = 1803,1801:1803
rsakey =
81111111111111111111111111111111111111111111111111111111111111111111111111111112F
boxkey = 4111111111111A
detect = cd
nagra_read = 1
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2
oscam.conf
[global]
logfile = /var/log/oscam.log
nice = -1
saveinithistory = 1
[monitor]
port = 9000
nocrypt = 192.168.1.1-192.168.1.10
aulow = 120
hideclient_to = 15
monlevel = 4
appendchaninfo = 0
[newcamd]
port = nr_portu@1801:000000;nr_portu@1803:000000
key = 0102030405060708091011121314
[cccam]
port = 1200
reshare = 0
version = 2.1.1
[webif]
httpport = 1002
httpuser = admin
httppwd = admin
httprefresh = 30
httpallowed = 192.168.1.11-192.168.1.20
httphideidleclients = 1
oscam user
[account]
user = ja
pwd = ja
group = 1,2
keepalive = 0
au =1
lub:au =0 (bloker włączony)
|
| |
|
|
| hermes-80 |
Dodano 10-12-2011 12:00
|
VIP
Posty: 3676
Dołączył: 21/04/2009 11:24
|
@DdoxD mógłbyś rozebrać swojego HUB-a, na którym działają ci jednocześnie te 3 karty i podać symbol układu scalonego na jakim jest oparty ten HUB??
===============================================================
Netgear WNR3500L v1
Podziękowania dla administracji Openlinksys.info!
|
| |
|
|
| robo1973 |
Dodano 10-12-2011 14:50
|
User
Posty: 8
Dołączył: 27/06/2011 22:16
|
Gdzie znajdę kompilacje oscam 5382 na ar71xx?
Gargoyle na TL 3420
Edytowany przez robo1973 dnia 10-12-2011 15:14
|
| |
|
|
| hermes-80 |
Dodano 10-12-2011 14:57
|
VIP
Posty: 3676
Dołączył: 21/04/2009 11:24
|
Nie szukasz kompilacji pod procesor ale pod system operacyjny czyli zapewne OpenWRT.
===============================================================
Netgear WNR3500L v1
Podziękowania dla administracji Openlinksys.info!
|
| |
|
|
| pawelsonx |
Dodano 10-12-2011 19:10
|
User
Posty: 22
Dołączył: 17/11/2011 14:21
|
mam od kilku dni huba 7 portowego z zasilaczem i działa bez problemu |
| |
|
|
| hermes-80 |
Dodano 10-12-2011 19:20
|
VIP
Posty: 3676
Dołączył: 21/04/2009 11:24
|
Cytat mam od kilku dni huba 7 portowego z zasilaczem i działa bez problemu
===============================================================
Netgear WNR3500L v1
Podziękowania dla administracji Openlinksys.info!
|
| |
|
|
| pawelsonx |
Dodano 10-12-2011 21:00
|
User
Posty: 22
Dołączył: 17/11/2011 14:21
|
jedna w samrgo druga w phoenixie
samrgo na 001:004 |
| |
|
|
| radomir |
Dodano 21-12-2011 19:31
|
User
Posty: 65
Dołączył: 17/09/2009 12:16
|
Koledzy czy ktos z was wrzucal moze oscama na linksys e4200 ?
Zarzucilem tomato od @Shibby poustawialem chyba wszystko co trzeba ale jajka sie dzieja z oscamem.
Po odpaleniu pochodzi max. minutke i wywala skrypt stawia go z powrotem i tak w kolko dzieje sie tak na ver.4803 z repo @shibbiego ,probowalem kilku nowszych binarek ale niestety bez oczekiwanego skutku.
Prosilbym o link do ver.5382 poniewaz wczesniej podane juz wygasly a moze ona bedzie dzialac jak trzeba.
Edit:
Chyba trafiłem stabilną wersję a jest to ver.1.00-unstable_svn Rev. 5237S z repo od @Oleg.
Chodzi już prawie 19 godzinek bez wywalania. 
Edit:
Nie wiem jeszcze w czym problem ale kiedy uporałem się z działaniem oscama i chodzi bez zająknięcia przez cały czas to mam dziwny problem z kartą w smargo.
W czym rzecz po odpaleniu wszystko leci jak trzeba odczytuje karteczke itp po kilku godzinkach karta jest cały czas widoczna i pokazuje CARDOK ale nic z niej nie leci tak jakby jej nie było ......
Edytowany przez radomir dnia 25-12-2011 12:14
|
| |
|
|
| wawryl |
Dodano 28-12-2011 11:35
|
User
Posty: 119
Dołączył: 04/10/2007 11:44
|
Cytat
Edit:
Nie wiem jeszcze w czym problem ale kiedy uporałem się z działaniem oscama i chodzi bez zająknięcia przez cały czas to mam dziwny problem z kartą w smargo.
W czym rzecz po odpaleniu wszystko leci jak trzeba odczytuje karteczke itp po kilku godzinkach karta jest cały czas widoczna i pokazuje CARDOK ale nic z niej nie leci tak jakby jej nie było ......
Kolego jaka karta? Przypadkiem nie orange? Bo orange namieszało z długością ecmów
ASUS WL500GP v1 RAMmod 128MB + Tomato MIPSR1-083V K26 USB Mega-VPN
_____________________________
|
| |
|
|
| radomir |
Dodano 28-12-2011 14:53
|
User
Posty: 65
Dołączył: 17/09/2009 12:16
|
Karteczka C+.
Z problemem się uporałem :
zmieniłem binarkę na ver.5991
Dodatkowo przestawiłem się z ustawienia czytnika (smargo) MOUSE na smartreader i śmiga jak burza teraz będę kombinował jak do tego zestawu dorzucić drugie smargo z karteczką viaccess.
UPC Fiber Power 250Mb/s ==>>modem Cisco EPC 3212==>>router Asus RT-AC68U
|
| |
|
|
| wawryl |
Dodano 28-12-2011 20:43
|
User
Posty: 119
Dołączył: 04/10/2007 11:44
|
Tak sie zastanawiam czy warto pchać oscam do asusa 500gp v1. Bo Dm800HD straszeni mi zamula oscam. Może asus będzie sobie lepiej radził na tomato
Edit zainstalowany oscam
Cytat PID USER VSZ STAT COMMAND
1 root 1364 S /sbin/init noinitrd
2 root 0 SW< [kthreadd]
3 root 0 SW< [ksoftirqd/0]
4 root 0 SW< [events/0]
5 root 0 SW< [khelper]
19 root 0 SW< [kblockd/0]
48 root 0 SW [pdflush]
49 root 0 SW [pdflush]
50 root 0 SW< [kswapd0]
51 root 0 SW< [aio/0]
93 root 0 SW< [mtdblockd]
294 root 752 S hotplug2 --persistent --no-coldplug
333 root 1348 S buttons
334 root 1316 S console
335 root 1724 S /bin/sh
337 root 0 SWN [jffs2_gcd_mtd3]
339 root 1716 S syslogd -L -s 50
344 root 1716 S klogd
355 root 0 SW< [khubd]
388 root 736 S p9100d -f /dev/usb/lp0 0
418 root 0 SW< [scsi_eh_0]
419 root 0 SW< [usb-storage]
546 root 1720 S telnetd -p 23
549 root 1144 S dropbear -p 22 -a
565 root 1012 S eapd
568 root 1120 S nas
594 root 1732 S crond -l 9
600 root 1028 S rstats
602 root 1348 S sched start
605 root 992 S cstats
888 root 968 S ntpsync --init
918 root 1352 S radio join
1117 root 2572 S httpd
1120 root 1732 S udhcpc -i eth1 -b -s dhcpc-event -H unknown -m
1129 root 1728 S -sh
1158 root 2652 S oscam -b
1160 root 2876 S N oscam -b
1730 root 2876 S N oscam -b
1731 root 2876 S N oscam -b
1732 root 2876 S N oscam -b
1733 root 2876 S N oscam -b
1734 root 2876 S N oscam -b
7449 root 2400 S vsftpd
8057 nobody 1048 S dnsmasq -c 1500 --log-async
8063 root 2504 S nmbd -D
8064 root 2456 S nmbd -D
8065 root 3356 S N smbd -D
10876 root 2584 S httpd
10877 root 1720 S sh -c /tmp/.wxEZJJa1 2>&1
10878 root 1720 S /bin/sh /tmp/.wxEZJJa1
10882 root 1720 R ps
Jest w procesach ale brak dostępu poprzez webif
Edytowany przez wawryl dnia 31-12-2011 20:24
ASUS WL500GP v1 RAMmod 128MB + Tomato MIPSR1-083V K26 USB Mega-VPN
_____________________________
|
| |
|
|
| hermes-80 |
Dodano 31-12-2011 21:09
|
VIP
Posty: 3676
Dołączył: 21/04/2009 11:24
|
A skonfigurowałeś interfejs webif i dopuściłeś podsieć do logowania, z której się próbujesz zalogować?
===============================================================
Netgear WNR3500L v1
Podziękowania dla administracji Openlinksys.info!
|
| |
|
|
| wawryl |
Dodano 31-12-2011 23:29
|
User
Posty: 119
Dołączył: 04/10/2007 11:44
|
co do webif jest skonfigurowane ale zobaczę jeszcze podsieć bo wcześniej ten sam config śmigał na innej grupie.
Pytanie z innej beczki czy nie macie problemu ze smargo pod oscam?
ASUS WL500GP v1 RAMmod 128MB + Tomato MIPSR1-083V K26 USB Mega-VPN
_____________________________
|
| |
|
|
| radomir |
Dodano 01-01-2012 10:41
|
User
Posty: 65
Dołączył: 17/09/2009 12:16
|
Co do smargo to u mnie problem jest taki że przy starcie routera wszystko ładnie startuje karteczka w smargo śmiga jak trzeba ale wystarczy że oscam się wyłoży lub ręcznie go zrestartuję i smargo przestaje działać konieczny jest wtedy reboot routera.
Dzieje się tak to ustawieniach smartreader.
Wcześniej używałem go jako MOUSE i było ok więc podejrzewam że coś jest z driverami ale nie mam ostatnio zbytnio czasu żeby się z tym pobawić.
UPC Fiber Power 250Mb/s ==>>modem Cisco EPC 3212==>>router Asus RT-AC68U
|
| |
|
|
| wawryl |
Dodano 01-01-2012 10:56
|
User
Posty: 119
Dołączył: 04/10/2007 11:44
|
log tomato:
Cytat
Jan 1 01:00:53 unknown syslog.info syslogd started: BusyBox v1.18.4
Jan 1 01:00:53 unknown user.notice kernel: klogd started: BusyBox v1.18.4 (2011-12-03 20:09:02 CET)
Jan 1 01:00:53 unknown user.notice kernel: Linux version 2.6.22.19 (root@tomato) (gcc version 4.2.4) #12 Sat Dec 3 20:27:10 CET 2011
Jan 1 01:00:53 unknown user.warn kernel: CPU revision is: 00029006
Jan 1 01:00:53 unknown user.warn kernel: Setting the PFC to its default value
Jan 1 01:00:53 unknown user.warn kernel: Determined physical RAM map:
Jan 1 01:00:53 unknown user.warn kernel: memory: 08000000 @ 00000000 (usable)
Jan 1 01:00:53 unknown user.debug kernel: On node 0 totalpages: 32768
Jan 1 01:00:53 unknown user.debug kernel: Normal zone: 256 pages used for memmap
Jan 1 01:00:53 unknown user.debug kernel: Normal zone: 0 pages reserved
Jan 1 01:00:53 unknown user.debug kernel: Normal zone: 32512 pages, LIFO batch:7
Jan 1 01:00:53 unknown user.warn kernel: Built 1 zonelists. Total pages: 32512
Jan 1 01:00:53 unknown user.notice kernel: Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
Jan 1 01:00:53 unknown user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan 1 01:00:53 unknown user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan 1 01:00:53 unknown user.info kernel: Synthesized TLB refill handler (19 instructions).
Jan 1 01:00:53 unknown user.info kernel: Synthesized TLB load handler fastpath (31 instructions).
Jan 1 01:00:53 unknown user.info kernel: Synthesized TLB store handler fastpath (31 instructions).
Jan 1 01:00:53 unknown user.info kernel: Synthesized TLB modify handler fastpath (30 instructions).
Jan 1 01:00:53 unknown user.warn kernel: PID hash table entries: 512 (order: 9, 2048 bytes)
Jan 1 01:00:53 unknown user.warn kernel: CPU: BCM4704 rev 9 pkg 0 at 264 MHz
Jan 1 01:00:53 unknown user.warn kernel: Using 132.000 MHz high precision timer.
Jan 1 01:00:53 unknown user.info kernel: console [ttyS0] enabled
Jan 1 01:00:53 unknown user.warn kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 01:00:53 unknown user.warn kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Jan 1 01:00:53 unknown user.info kernel: Memory: 126592k/131072k available (36k kernel code, 4328k reserved, 2874k data, 120k init, 0k highmem)
Jan 1 01:00:53 unknown user.debug kernel: Calibrating delay loop... 262.96 BogoMIPS (lpj=1314816)
Jan 1 01:00:53 unknown user.warn kernel: Mount-cache hash table entries: 512
Jan 1 01:00:53 unknown user.info kernel: NET: Registered protocol family 16
Jan 1 01:00:53 unknown user.warn kernel: PCI: Initializing host
Jan 1 01:00:53 unknown user.warn kernel: PCI: Fixing up bus 0
Jan 1 01:00:53 unknown user.warn kernel: PCI: Fixing up bridge
Jan 1 01:00:53 unknown user.debug kernel: PCI: Setting latency timer of device 0000:01:00.0 to 64
Jan 1 01:00:53 unknown user.warn kernel: PCI: Fixing up bus 1
Jan 1 01:00:53 unknown user.info kernel: NET: Registered protocol family 2
Jan 1 01:00:53 unknown user.info kernel: Time: MIPS clocksource has been installed.
Jan 1 01:00:53 unknown user.warn kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 01:00:53 unknown user.warn kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Jan 1 01:00:53 unknown user.warn kernel: TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 01:00:53 unknown user.info kernel: TCP: Hash tables configured (established 4096 bind 4096)
Jan 1 01:00:53 unknown user.info kernel: TCP reno registered
Jan 1 01:00:53 unknown user.info kernel: squashfs: version 3.0 (2006/03/15) Phillip Lougher
Jan 1 01:00:53 unknown user.info kernel: io scheduler noop registered (default)
Jan 1 01:00:53 unknown user.info kernel: HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
Jan 1 01:00:53 unknown user.info kernel: N_HDLC line discipline registered.
Jan 1 01:00:53 unknown user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan 1 01:00:53 unknown user.info kernel: serial8250: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
Jan 1 01:00:53 unknown user.info kernel: serial8250: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
Jan 1 01:00:53 unknown user.info kernel: PPP generic driver version 2.4.2
Jan 1 01:00:53 unknown user.info kernel: MPPE/MPPC encryption/compression module registered
Jan 1 01:00:53 unknown user.info kernel: NET: Registered protocol family 24
Jan 1 01:00:53 unknown user.info kernel: PPPoL2TP kernel driver, V0.17
Jan 1 01:00:53 unknown user.info kernel: PPTP driver version 0.8.5
Jan 1 01:00:53 unknown user.info kernel: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan 1 01:00:53 unknown user.debug kernel: Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Jan 1 01:00:53 unknown user.debug kernel: Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Jan 1 01:00:53 unknown user.debug kernel: Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
Jan 1 01:00:53 unknown user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 1 01:00:53 unknown user.warn kernel: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
Jan 1 01:00:53 unknown user.notice kernel: number of CFI chips: 1
Jan 1 01:00:53 unknown user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan 1 01:00:53 unknown user.notice kernel: Flash device: 0x800000 at 0x1c000000
Jan 1 01:00:53 unknown user.notice kernel: Creating 5 MTD partitions on "Physically mapped flash":
Jan 1 01:00:53 unknown user.notice kernel: 0x00000000-0x00040000 : "pmon"
Jan 1 01:00:53 unknown user.notice kernel: 0x00040000-0x007f0000 : "linux"
Jan 1 01:00:53 unknown user.notice kernel: 0x00127400-0x00710000 : "rootfs"
Jan 1 01:00:54 unknown user.notice kernel: 0x00710000-0x007f0000 : "jffs2"
Jan 1 01:00:54 unknown user.notice kernel: 0x007f0000-0x00800000 : "nvram"
Jan 1 01:00:54 unknown user.warn kernel: Found a 0MB serial flash
Jan 1 01:00:54 unknown user.err kernel: sflash: found no supported devices
Jan 1 01:00:54 unknown user.warn kernel: u32 classifier
Jan 1 01:00:54 unknown user.warn kernel: OLD policer on
Jan 1 01:00:54 unknown user.warn kernel: Netfilter messages via NETLINK v0.30.
Jan 1 01:00:54 unknown user.warn kernel: nf_conntrack version 0.5.0 (1024 buckets, 8192 max)
Jan 1 01:00:54 unknown user.warn kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 01:00:54 unknown user.info kernel: ipt_account 0.1.21 : Piotr Gasidlo , http://www.barbara.eu.org/~quaker/ipt_account/
Jan 1 01:00:54 unknown user.warn kernel: net/ipv4/netfilter/tomato_ct.c [Dec 3 2011 20:26:16]
Jan 1 01:00:54 unknown user.info kernel: NET: Registered protocol family 1
Jan 1 01:00:54 unknown user.info kernel: NET: Registered protocol family 10
Jan 1 01:00:54 unknown user.warn kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 01:00:54 unknown user.info kernel: NET: Registered protocol family 17
Jan 1 01:00:54 unknown user.info kernel: 802.1Q VLAN Support v1.8 Ben Greear
Jan 1 01:00:54 unknown user.info kernel: All bugs added by David S. Miller
Jan 1 01:00:54 unknown user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan 1 01:00:54 unknown user.info kernel: Freeing unused kernel memory: 120k freed
Jan 1 01:00:54 unknown user.warn kernel: Warning: unable to open an initial console.
Jan 1 01:00:54 unknown user.warn kernel: emf: module license 'Proprietary' taints kernel.
Jan 1 01:00:54 unknown user.debug kernel: PCI: Setting latency timer of device 0000:00:01.0 to 64
Jan 1 01:00:54 unknown user.warn kernel: eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 5.10.147.0
Jan 1 01:00:54 unknown user.debug kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
Jan 1 01:00:54 unknown user.warn kernel: PCI: Enabling device 0000:01:02.0 (0000 -> 0002)
Jan 1 01:00:54 unknown user.debug kernel: PCI: Setting latency timer of device 0000:01:02.0 to 64
Jan 1 01:00:54 unknown user.warn kernel: eth1: Broadcom BCM4318 802.11 Wireless Controller 5.10.147.0
Jan 1 01:00:54 unknown user.warn kernel: Algorithmics/MIPS FPU Emulator v1.5
Jan 1 01:00:54 unknown user.info kernel: JFFS2 version 2.2. (NAND) Š 2001-2006 Red Hat, Inc.
Jan 1 01:00:54 unknown user.info kernel: usbcore: registered new interface driver usbfs
Jan 1 01:00:54 unknown user.info kernel: usbcore: registered new interface driver hub
Jan 1 01:00:54 unknown user.info kernel: usbcore: registered new device driver usb
Jan 1 01:00:54 unknown user.notice kernel: SCSI subsystem initialized
Jan 1 01:00:54 unknown user.info kernel: Initializing USB Mass Storage driver...
Jan 1 01:00:54 unknown user.info kernel: usbcore: registered new interface driver usb-storage
Jan 1 01:00:54 unknown user.info kernel: USB Mass Storage support registered.
Jan 1 01:00:55 unknown user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 01:00:55 unknown user.warn kernel: PCI: Enabling device 0000:01:03.2 (0000 -> 0002)
Jan 1 01:00:55 unknown user.info kernel: ehci_hcd 0000:01:03.2: EHCI Host Controller
Jan 1 01:00:55 unknown user.info kernel: ehci_hcd 0000:01:03.2: new USB bus registered, assigned bus number 1
Jan 1 01:00:55 unknown user.info kernel: ehci_hcd 0000:01:03.2: irq 12, io mem 0x40004000
Jan 1 01:00:55 unknown user.info kernel: ehci_hcd 0000:01:03.2: USB 2.0 started, EHCI 1.00
Jan 1 01:00:55 unknown user.info kernel: usb usb1: configuration #1 chosen from 1 choice
Jan 1 01:00:55 unknown user.info kernel: hub 1-0:1.0: USB hub found
Jan 1 01:00:55 unknown user.info kernel: hub 1-0:1.0: 4 ports detected
Jan 1 01:00:55 unknown user.info kernel: usbcore: registered new interface driver usblp
Jan 1 01:00:55 unknown user.info kernel: usblp: USB Printer Device Class driver
Jan 1 01:00:55 unknown user.info kernel: uhci_hcd: USB Universal Host Controller Interface driver
Jan 1 01:00:55 unknown user.debug hotplug[398]: Attached USB device 1-0:1.0 [INTERFACE=9/0/0 PRODUCT=1d6b/2/206]
Jan 1 01:00:55 unknown user.warn kernel: PCI: Enabling device 0000:01:03.0 (0000 -> 0001)
Jan 1 01:00:55 unknown user.info kernel: uhci_hcd 0000:01:03.0: UHCI Host Controller
Jan 1 01:00:55 unknown user.info kernel: uhci_hcd 0000:01:03.0: new USB bus registered, assigned bus number 2
Jan 1 01:00:55 unknown user.info kernel: uhci_hcd 0000:01:03.0: irq 12, io base 0x00000100
Jan 1 01:00:55 unknown user.info kernel: usb usb2: configuration #1 chosen from 1 choice
Jan 1 01:00:55 unknown user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 01:00:55 unknown user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 01:00:55 unknown user.warn kernel: PCI: Enabling device 0000:01:03.1 (0000 -> 0001)
Jan 1 01:00:55 unknown user.info kernel: uhci_hcd 0000:01:03.1: UHCI Host Controller
Jan 1 01:00:55 unknown user.info kernel: uhci_hcd 0000:01:03.1: new USB bus registered, assigned bus number 3
Jan 1 01:00:55 unknown user.info kernel: uhci_hcd 0000:01:03.1: irq 12, io base 0x00000120
Jan 1 01:00:55 unknown user.info kernel: usb usb3: configuration #1 chosen from 1 choice
Jan 1 01:00:55 unknown user.info kernel: hub 3-0:1.0: USB hub found
Jan 1 01:00:55 unknown user.info kernel: hub 3-0:1.0: 2 ports detected
Jan 1 01:00:55 unknown user.info kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2
Jan 1 01:00:55 unknown user.debug hotplug[407]: Attached USB device 2-0:1.0 [INTERFACE=9/0/0 PRODUCT=1d6b/1/206]
Jan 1 01:00:55 unknown user.info kernel: usb 1-1: configuration #1 chosen from 1 choice
Jan 1 01:00:55 unknown user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 01:00:55 unknown user.info kernel: usbcore: registered new interface driver usbserial
Jan 1 01:00:55 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
Jan 1 01:00:55 unknown user.info kernel: usbcore: registered new interface driver usbserial_generic
Jan 1 01:00:55 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
Jan 1 01:00:55 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
Jan 1 01:00:55 unknown user.info kernel: usbcore: registered new interface driver ftdi_sio
Jan 1 01:00:55 unknown user.info kernel: drivers/usb/serial/ftdi_sio.c: v1.5.0:USB FTDI Serial Converters Driver
Jan 1 01:00:55 unknown user.debug hotplug[417]: Attached USB device 3-0:1.0 [INTERFACE=9/0/0 PRODUCT=1d6b/1/206]
Jan 1 01:00:55 unknown user.debug hotplug[436]: Attached USB device 1-1:1.0 [INTERFACE=8/6/80 PRODUCT=13fe/3e00/100]
Jan 1 01:00:56 unknown user.debug kernel: vlan0: add 33:33:00:00:00:01 mcast address to master interface
Jan 1 01:00:56 unknown user.debug kernel: vlan0: add 01:00:5e:00:00:01 mcast address to master interface
Jan 1 01:00:56 unknown user.info kernel: vlan0: dev_set_allmulti(master, 1)
Jan 1 01:00:56 unknown user.info kernel: vlan0: dev_set_promiscuity(master, 1)
Jan 1 01:00:56 unknown user.info kernel: device eth0 entered promiscuous mode
Jan 1 01:00:56 unknown user.info kernel: device vlan0 entered promiscuous mode
Jan 1 01:00:56 unknown user.info kernel: br0: port 1(vlan0) entering forwarding state
Jan 1 01:00:58 unknown user.notice kernel: scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS
Jan 1 01:00:59 unknown authpriv.info dropbear[577]: Running in background
Jan 1 01:01:00 unknown user.notice kernel: sd 0:0:0:0: [sda] 15634432 512-byte hardware sectors (8005 MB)
Jan 1 01:01:00 unknown user.notice kernel: sd 0:0:0:0: [sda] Write Protect is off
Jan 1 01:01:00 unknown user.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
Jan 1 01:01:00 unknown user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan 1 01:01:00 unknown user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan 1 01:01:00 unknown daemon.info dnsmasq[609]: started, version 2.57 cachesize 1500
Jan 1 01:01:00 unknown daemon.info dnsmasq[609]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-I18N DHCP TFTP no-IDN
Jan 1 01:01:00 unknown daemon.info dnsmasq[609]: asynchronous logging enabled, queue limit is 5 messages
Jan 1 01:01:00 unknown daemon.info dnsmasq-dhcp[609]: DHCP, IP range 192.168.2.2 -- 192.168.2.51, lease time 1d
Jan 1 01:01:00 unknown daemon.info dnsmasq[609]: reading /etc/resolv.dnsmasq
Jan 1 01:01:00 unknown daemon.info dnsmasq[609]: using nameserver 192.168.1.1#53
Jan 1 01:01:00 unknown user.info kernel: sda: sda1
Jan 1 01:01:00 unknown user.notice kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk
Jan 1 01:01:00 unknown daemon.info dnsmasq[609]: read /etc/hosts - 2 addresses
Jan 1 01:01:00 unknown daemon.info dnsmasq[609]: read /etc/dnsmasq/hosts/hosts - 3 addresses
Jan 1 01:01:00 unknown daemon.info dnsmasq-dhcp[609]: read /etc/dnsmasq/dhcp/dhcp-hosts
Jan 1 01:01:00 unknown user.warn kernel: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Jan 1 01:01:00 unknown user.info hotplug[614]: USB ext2 fs at /dev/sda1 mounted on /tmp/mnt/PENDRIVE
Jan 1 01:01:04 unknown authpriv.info dropbear[679]: Child connection from ::ffff:192.168.2.5:1463
Jan 1 01:01:35 unknown user.info init[1]: Asus WL-500gP: Tomato 1.28.0000 MIPSR1-083V K26 USB VPN
Jan 1 01:01:35 unknown daemon.err nmbd[1083]: Samba server UNKNOWN is now a domain master browser for workgroup WORKGROUP on subnet UNICAST_SUBNET
Jan 1 01:01:44 unknown daemon.err nmbd[1083]: Samba server UNKNOWN is now a domain master browser for workgroup WORKGROUP on subnet 192.168.2.1
Jan 1 01:01:51 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
Jan 1 01:01:51 unknown user.info kernel: usbcore: registered new interface driver pl2303
Jan 1 01:01:51 unknown user.info kernel: drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
Jan 1 01:01:58 unknown daemon.err nmbd[1083]: Samba name server UNKNOWN is now a local master browser for workgroup WORKGROUP on subnet 192.168.2.1
Jan 1 01:02:59 unknown user.notice kernel: oscam sets custom speed on ttyS0. This is deprecated.
Jan 1 01:03:00 unknown user.notice kernel: oscam sets custom speed on ttyS0. This is deprecated.
Log oscam:
Cytat 1970/01/01 1:01:57 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #5961 (mips-wrt54g-linux)
1970/01/01 1:01:57 0 s version=1.20-unstable_svn, build #5961, system=mips-wrt54g-linux, nice=-10
1970/01/01 1:01:57 0 s client max. idle=120 sec, debug level=0
1970/01/01 1:01:57 0 s max. logsize=32 Kb, loghistorysize=4096 bytes
1970/01/01 1:01:57 0 s client timeout=6000 ms, fallback timeout=2500 ms, cache delay=0 ms
1970/01/01 1:01:57 0 s The current system time is smaller than the build date (Sep 28 2011). Waiting up to 60 seconds for time to correct
1970/01/01 1:02:58 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
1970/01/01 1:02:58 0 s Cannot open file "/opt/etc/oscam/oscam.services" (errno=2 No such file or directory)
1970/01/01 1:02:58 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
1970/01/01 1:02:58 0 s signal handling initialized (type=sysv)
1970/01/01 1:02:59 0 s 6548 service-id's loaded in 274ms
1970/01/01 1:02:59 0 s WARNING: You risk high CPU load and high ECM times with more than 2000 service-id´s!
1970/01/01 1:02:59 0 s HINT: --> use optimized lists from http://streamboard.gmc.to/wiki/index.php/Srvid
1970/01/01 1:02:59 0 s can't open file "/opt/etc/oscam/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
1970/01/01 1:02:59 0 s 940 provid's loaded
1970/01/01 1:02:59 0 s can't open file "/opt/etc/oscam/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
1970/01/01 1:02:59 0 s monitor: initialized (fd=7, port=9000)
1970/01/01 1:02:59 0 s camd35: disabled
1970/01/01 1:02:59 0 s cs378x: disabled
1970/01/01 1:02:59 0 s newcamd: disabled
1970/01/01 1:02:59 0 s cccam: initialized (fd=8, port=12005, crypted)
1970/01/01 1:02:59 0 s radegast: disabled
1970/01/01 1:02:59 0 s http thread started
1970/01/01 1:02:59 0 s reader check thread started
1970/01/01 1:02:59 0 s check thread started
1970/01/01 1:02:59 0 s creating thread for device /dev/ttyS0
1970/01/01 1:02:59 0 s loadbalancer: can't read from file /tmp/.oscam/stat
1970/01/01 1:02:59 0 s anti cascading disabled
1970/01/01 1:02:59 1011B850 h HTTP Server listening on port 8888
1970/01/01 1:03:01 1011A140 r reader cyfra initialized (device=/dev/ttyS0, detect=cd, mhz=368, cardmhz=357)
1970/01/01 1:03:02 0 cyfra card detected
1970/01/01 1:03:12 1011A140 r Error activating card.
1970/01/01 1:03:23 1011A140 r Error activating card.
1970/01/01 1:03:34 1011A140 r Error activating card.
oscam.server
Cytat # oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn build #5961
# Read more: http://streamboard.gmc.to/svn/oscam/trunk/Distribution/doc/txt/oscam.server.txt
[reader]
label = cyfra
description =
enable = 1
protocol = mouse
device = /dev/ttyS0
key =
password =
pincode = none
readnano =
services =
resetcycle = 0
smargopatch = 0
showcls = 10
fallback = 0
logport = 0
caid = 0100
boxid =
fix9993 = 0
rsakey =
ins7e =
force_irdeto = 0
boxkey =
atr =
ecmwhitelist =
detect = cd
nagra_read = 0
mhz = 368
cardmhz = 357
ident = 0100:000068
chid =
class =
aeskeys =
showcls = 10
group = 1
emmcache = 1,3,2
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
savenano =
blocknano =
ccchop = 0
deprecated = 0
audisabled = 1
auprovid = 000068
ndsversion = 0
ratelimitecm = 0
ratelimitseconds = 0
cooldown = 0,0
Co jest nie tak ze smargo?
Wszystkiego najlepszego forumowiczom w Nowym Roku
ASUS WL500GP v1 RAMmod 128MB + Tomato MIPSR1-083V K26 USB Mega-VPN
_____________________________
|
| |
|
' target='_blank'>Link
