|
Tomato - bugi/problemy - wszystkie wersje
|
| hermes-80 |
Dodano 07-02-2013 10:12
|
VIP
Posty: 3676
Dołączył: 21/04/2009 11:24
|
Trzeba by było zawrzeć to w instrukcji warunkowej if z odpowiednim warunkiem.
===============================================================
Netgear WNR3500L v1
Podziękowania dla administracji Openlinksys.info!
|
| |
|
|
| salutuj |
Dodano 08-02-2013 10:55
|
User
Posty: 11
Dołączył: 22/10/2012 21:21
|
Cytat hermes-80 napisał(a):
Ja mam w init montowanie wszystkich partycji - tylko trzeba zbadać ile sekund wcześniej odpali się init przez rozpoznaniem dysku - zazwyczaj jest to około 3 - 5 s więc takie opóźnienie trzeba dać.
Montowanie powinno być w init - bo firewall służy do czego innego jak sama nazwa wskazuje.
Warto też dodać skrypt, który rozpozna czy są zamontowane partycje - jeśli nie to zamontuje - bo i init przy restarcie niektórych usług również wykonuje się kilka razy.
np:
#montowanie dysku
partycja="opt"
mount=`df -h|grep $partycja|wc -l`
if [ $mount = 0 ] then
/bin/mount UUID="0565e69b-be5e-4bc6-a43d-9473b3326411" /opt
logger "/opt - Dysk zamontowany"
else
logger "Blad - /opt zamontowane"
fi
patycja="nas"
if [ $mount = 0 ] then
/bin/mount UUID="dd579a49-8dbf-4363-86a7-f20ced081d84" /nas
logger "/nas - Dysk zamontowany"
else
logger "Blad - /nas zamontowany"
fi
Dzięki. Skoro init jest wołany w innym wątku niż rozpoznanie dysku, a dodatkowo potencjalnie kilkukrotnie, to może twórcy Tomato mogliby rozważyć dodanie innych jednorazowych "hooków". Tu w szczególności hook rozpoznający dyski (choć jego rolę pewnie pełnić powinien automount i nie wiem czemu jest sugestia by go wyłączać?
Opis montowania urządzenia podpiętego pod usb
Wyłączamy automontowanie w gui.
(...)
Na tomato z kernelem 2.6 dyski wykrywane są już jako /dev/sda(x). Tak więc chcąc podmontować pierwszą partycję dysku pod /opt wystarczy wpisać w skrypt firewalla
(...)
Zapisujemy zmiany i robimy restart routera
|
| |
|
|
| hermes-80 |
Dodano 08-02-2013 11:02
|
VIP
Posty: 3676
Dołączył: 21/04/2009 11:24
|
Dlatego, że na otwartym systemie jakim jest Tomato są różne metody rozwiązania tego samego problemu.
Ile głów tyle pomysłów, które nie zawsze pasują do konkretnej potrzeby użytkownika.
===============================================================
Netgear WNR3500L v1
Podziękowania dla administracji Openlinksys.info!
|
| |
|
|
| Jabol |
Dodano 10-02-2013 13:12
|
User
Posty: 12
Dołączył: 21/12/2012 17:50
|
Witam mam problem z wbudowanym transmission.
Gdy zaczyna pobierać z większa prędkością około 4 MB/s transmision sie zwiesza. Spotkał sie ktoś z czymś takim?? |
| |
|
|
| LuCzeK |
Dodano 10-02-2013 17:15
|
User
Posty: 140
Dołączył: 30/01/2009 18:22
|
INTERNET < lan > rt-n16 jako ap + wds < wifi > rt-n66u jako ap + wds
takie zestawienie działa jedynie na rt-n66u przy sztywno ustawionym Wireless Network Mode na b/g mixed lub n only za nic nie chce działać na auto
rt-n16 Wireless Network Mode ustawiony na auto
Edytowany przez LuCzeK dnia 10-02-2013 17:44
|
| |
|
|
| Jabol |
Dodano 19-02-2013 14:29
|
User
Posty: 12
Dołączył: 21/12/2012 17:50
|
Problem ze zwieszaniem transmission routera przy ściąganiu z prędkością 1-3 Mb/s nadal występuje :((
Cytat Jan 1 01:00:51 WNR3500L syslog.info syslogd started: BusyBox v1.18.5
Jan 1 01:00:51 WNR3500L user.notice kernel: klogd started: BusyBox v1.18.5 (2013-01-20 13:37:13 CET)
Jan 1 01:00:51 WNR3500L user.notice kernel: Linux version 2.6.22.19 (root@tomato) (gcc version 4.2.4) #3 Sun Jan 20 13:55:15 CET 2013
Jan 1 01:00:51 WNR3500L user.warn kernel: CPU revision is: 00019749
Jan 1 01:00:51 WNR3500L user.warn kernel: Determined physical RAM map:
Jan 1 01:00:51 WNR3500L user.warn kernel: memory: 07fff000 @ 00000000 (usable)
Jan 1 01:00:51 WNR3500L user.debug kernel: Entering add_active_range(0, 0, 32767) 0 entries of 256 used
Jan 1 01:00:51 WNR3500L user.info kernel: Zone PFN ranges:
Jan 1 01:00:51 WNR3500L user.warn kernel: Normal 0 -> 32767
Jan 1 01:00:51 WNR3500L user.warn kernel: HighMem 32767 -> 32767
Jan 1 01:00:51 WNR3500L user.info kernel: early_node_map[1] active PFN ranges
Jan 1 01:00:51 WNR3500L user.warn kernel: 0: 0 -> 32767
Jan 1 01:00:51 WNR3500L user.debug kernel: On node 0 totalpages: 32767
Jan 1 01:00:51 WNR3500L user.debug kernel: Normal zone: 0 pages used for memmap
Jan 1 01:00:51 WNR3500L user.debug kernel: Normal zone: 0 pages reserved
Jan 1 01:00:51 WNR3500L user.debug kernel: Normal zone: 32767 pages, LIFO batch:7
Jan 1 01:00:51 WNR3500L user.debug kernel: HighMem zone: 0 pages used for memmap
Jan 1 01:00:51 WNR3500L user.warn kernel: Built 1 zonelists. Total pages: 32767
Jan 1 01:00:51 WNR3500L user.notice kernel: Kernel command line: root=/dev/mtdblock15 console=ttyS0,115200
Jan 1 01:00:51 WNR3500L user.warn kernel: Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Jan 1 01:00:51 WNR3500L user.warn kernel: Primary data cache 32kB, 4-way, linesize 32 bytes.
Jan 1 01:00:51 WNR3500L user.info kernel: Synthesized TLB refill handler (20 instructions).
Jan 1 01:00:51 WNR3500L user.info kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan 1 01:00:51 WNR3500L user.info kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan 1 01:00:51 WNR3500L user.info kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan 1 01:00:51 WNR3500L user.warn kernel: PID hash table entries: 512 (order: 9, 2048 bytes)
Jan 1 01:00:51 WNR3500L user.warn kernel: CPU: BCM5357 rev 2 pkg 10 at 480 MHz
Jan 1 01:00:51 WNR3500L user.warn kernel: Using 240.000 MHz high precision timer.
Jan 1 01:00:51 WNR3500L user.info kernel: console [ttyS0] enabled
Jan 1 01:00:51 WNR3500L user.warn kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 01:00:51 WNR3500L user.warn kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Jan 1 01:00:51 WNR3500L user.info kernel: Memory: 126620k/131068k available (33k kernel code, 4288k reserved, 2794k data, 128k init, 0k highmem)
Jan 1 01:00:51 WNR3500L user.debug kernel: Calibrating delay loop... 239.20 BogoMIPS (lpj=1196032)
Jan 1 01:00:51 WNR3500L user.warn kernel: Mount-cache hash table entries: 512
Jan 1 01:00:51 WNR3500L user.info kernel: NET: Registered protocol family 16
Jan 1 01:00:51 WNR3500L user.warn kernel: PCI: no core
Jan 1 01:00:51 WNR3500L user.warn kernel: PCI: no core
Jan 1 01:00:51 WNR3500L user.warn kernel: PCI: Fixing up bus 0
Jan 1 01:00:51 WNR3500L user.info kernel: NET: Registered protocol family 2
Jan 1 01:00:51 WNR3500L user.info kernel: Time: MIPS clocksource has been installed.
Jan 1 01:00:51 WNR3500L user.warn kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 01:00:51 WNR3500L user.warn kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Jan 1 01:00:51 WNR3500L user.warn kernel: TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 01:00:51 WNR3500L user.info kernel: TCP: Hash tables configured (established 4096 bind 4096)
Jan 1 01:00:51 WNR3500L user.info kernel: TCP reno registered
Jan 1 01:00:51 WNR3500L user.info kernel: squashfs: version 3.0 (2006/03/15) Phillip Lougher
Jan 1 01:00:51 WNR3500L user.info kernel: io scheduler noop registered (default)
Jan 1 01:00:51 WNR3500L user.info kernel: HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
Jan 1 01:00:51 WNR3500L user.info kernel: N_HDLC line discipline registered.
Jan 1 01:00:51 WNR3500L user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan 1 01:00:51 WNR3500L user.info kernel: serial8250: ttyS0 at MMIO 0xb8000300 (irq = 8) is a 16550A
Jan 1 01:00:51 WNR3500L user.info kernel: PPP generic driver version 2.4.2
Jan 1 01:00:51 WNR3500L user.info kernel: MPPE/MPPC encryption/compression module registered
Jan 1 01:00:51 WNR3500L user.info kernel: NET: Registered protocol family 24
Jan 1 01:00:51 WNR3500L user.info kernel: PPPoL2TP kernel driver, V0.18.3
Jan 1 01:00:51 WNR3500L user.info kernel: PPTP driver version 0.8.5
Jan 1 01:00:51 WNR3500L user.err kernel: pflash: found no supported devices
Jan 1 01:00:51 WNR3500L user.warn kernel: Found an ST compatible serial flash with 0 64KB blocks; total size 0MB
Jan 1 01:00:52 WNR3500L user.err kernel: sflash: found no supported devices
Jan 1 01:00:52 WNR3500L user.warn kernel: Found a Samsung NAND flash with 2048B pages or 128KB blocks; total size 128MB
Jan 1 01:00:52 WNR3500L user.notice kernel: nflash: squash filesystem with lzma found at block 6240
Jan 1 01:00:52 WNR3500L user.warn kernel: Boot partition size = 524288(0x80000)
Jan 1 01:00:52 WNR3500L user.notice kernel: Creating 16 MTD partitions on "nflash":
Jan 1 01:00:52 WNR3500L user.notice kernel: 0x00000000-0x00080000 : "boot"
Jan 1 01:00:52 WNR3500L user.notice kernel: 0x00080000-0x00200000 : "nvram"
Jan 1 01:00:52 WNR3500L user.notice kernel: 0x00200000-0x00240000 : "board_data"
Jan 1 01:00:52 WNR3500L user.notice kernel: 0x00240000-0x00280000 : "POT1"
Jan 1 01:00:52 WNR3500L user.notice kernel: 0x00280000-0x002c0000 : "POT2"
Jan 1 01:00:52 WNR3500L user.notice kernel: 0x002c0000-0x00300000 : "T_Meter1"
Jan 1 01:00:52 WNR3500L user.notice kernel: 0x00300000-0x00340000 : "T_Meter2"
Jan 1 01:00:52 WNR3500L user.notice kernel: 0x00340000-0x00380000 : "ML1"
Jan 1 01:00:52 WNR3500L user.notice kernel: 0x00380000-0x003c0000 : "ML2"
Jan 1 01:00:52 WNR3500L user.notice kernel: 0x003c0000-0x00400000 : "ML3"
Jan 1 01:00:52 WNR3500L user.notice kernel: 0x00400000-0x00440000 : "ML4"
Jan 1 01:00:52 WNR3500L user.notice kernel: 0x00440000-0x00480000 : "ML5"
Jan 1 01:00:52 WNR3500L user.notice kernel: 0x00480000-0x004c0000 : "ML6"
Jan 1 01:00:52 WNR3500L user.notice kernel: 0x004c0000-0x00500000 : "ML7"
Jan 1 01:00:52 WNR3500L user.notice kernel: 0x00500000-0x02000000 : "linux"
Jan 1 01:00:52 WNR3500L user.notice kernel: 0x00618270-0x02000000 : "rootfs"
Jan 1 01:00:52 WNR3500L user.warn kernel: _nvram_init: allocat header: 2151120896, size= 32768
Jan 1 01:00:52 WNR3500L user.warn kernel: u32 classifier
Jan 1 01:00:52 WNR3500L user.warn kernel: OLD policer on
Jan 1 01:00:52 WNR3500L user.warn kernel: Netfilter messages via NETLINK v0.30.
Jan 1 01:00:52 WNR3500L user.warn kernel: nf_conntrack version 0.5.0 (1024 buckets, 8192 max)
Jan 1 01:00:52 WNR3500L user.warn kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 01:00:52 WNR3500L user.info kernel: ipt_account 0.1.21 : Piotr Gasidlo , http://www.barbara.eu.org/~quaker/ipt_account/
Jan 1 01:00:52 WNR3500L user.warn kernel: net/ipv4/netfilter/tomato_ct.c [Jan 17 2013 17:14:59]
Jan 1 01:00:52 WNR3500L user.info kernel: NET: Registered protocol family 1
Jan 1 01:00:52 WNR3500L user.info kernel: NET: Registered protocol family 10
Jan 1 01:00:52 WNR3500L user.warn kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 01:00:52 WNR3500L user.info kernel: NET: Registered protocol family 17
Jan 1 01:00:52 WNR3500L user.info kernel: 802.1Q VLAN Support v1.8 Ben Greear
Jan 1 01:00:52 WNR3500L user.info kernel: All bugs added by David S. Miller
Jan 1 01:00:52 WNR3500L user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan 1 01:00:52 WNR3500L user.info kernel: Freeing unused kernel memory: 128k freed
Jan 1 01:00:52 WNR3500L user.warn kernel: Warning: unable to open an initial console.
Jan 1 01:00:52 WNR3500L user.warn kernel: emf: module license 'Proprietary' taints kernel.
Jan 1 01:00:52 WNR3500L user.debug kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
Jan 1 01:00:52 WNR3500L user.warn kernel: eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.20
Jan 1 01:00:52 WNR3500L user.warn kernel: wl_module_init: passivemode set to 0x0
Jan 1 01:00:52 WNR3500L user.debug kernel: PCI: Setting latency timer of device 0000:00:01.0 to 64
Jan 1 01:00:52 WNR3500L user.warn kernel: eth1: Broadcom BCM4329 802.11 Wireless Controller 5.100.138.20
Jan 1 01:00:52 WNR3500L user.warn kernel: Algorithmics/MIPS FPU Emulator v1.5
Jan 1 01:00:52 WNR3500L user.info kernel: usbcore: registered new interface driver usbfs
Jan 1 01:00:52 WNR3500L user.info kernel: usbcore: registered new interface driver hub
Jan 1 01:00:52 WNR3500L user.info kernel: usbcore: registered new device driver usb
Jan 1 01:00:52 WNR3500L user.notice kernel: SCSI subsystem initialized
Jan 1 01:00:52 WNR3500L user.info kernel: Initializing USB Mass Storage driver...
Jan 1 01:00:52 WNR3500L user.info kernel: usbcore: registered new interface driver usb-storage
Jan 1 01:00:52 WNR3500L user.info kernel: USB Mass Storage support registered.
Jan 1 01:00:53 WNR3500L user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 01:00:53 WNR3500L user.debug kernel: PCI: Setting latency timer of device 0000:00:04.1 to 64
Jan 1 01:00:53 WNR3500L user.info kernel: ehci_hcd 0000:00:04.1: EHCI Host Controller
Jan 1 01:00:53 WNR3500L user.info kernel: ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
Jan 1 01:00:53 WNR3500L user.info kernel: ehci_hcd 0000:00:04.1: irq 5, io mem 0x18004000
Jan 1 01:00:53 WNR3500L user.info kernel: ehci_hcd 0000:00:04.1: USB 0.0 started, EHCI 1.00
Jan 1 01:00:53 WNR3500L user.info kernel: usb usb1: configuration #1 chosen from 1 choice
Jan 1 01:00:53 WNR3500L user.info kernel: hub 1-0:1.0: USB hub found
Jan 1 01:00:53 WNR3500L user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 01:00:53 WNR3500L user.debug hotplug[469]: Attached USB device 1-0:1.0 [INTERFACE=9/0/0 PRODUCT=1d6b/2/206]
Jan 1 01:00:53 WNR3500L user.info sd-idle[474]: initialized
Jan 1 01:00:53 WNR3500L user.debug kernel: vlan1: add 33:33:00:00:00:01 mcast address to master interface
Jan 1 01:00:53 WNR3500L user.debug kernel: vlan1: add 01:00:5e:00:00:01 mcast address to master interface
Jan 1 01:00:53 WNR3500L user.info kernel: vlan1: dev_set_allmulti(master, 1)
Jan 1 01:00:54 WNR3500L user.info kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2
Jan 1 01:00:54 WNR3500L user.info kernel: vlan1: dev_set_promiscuity(master, 1)
Jan 1 01:00:54 WNR3500L user.info kernel: device eth0 entered promiscuous mode
Jan 1 01:00:54 WNR3500L user.info kernel: device vlan1 entered promiscuous mode
Jan 1 01:00:55 WNR3500L user.info kernel: device eth1 entered promiscuous mode
Jan 1 01:00:55 WNR3500L user.info kernel: br0: port 2(eth1) entering forwarding state
Jan 1 01:00:55 WNR3500L user.info kernel: br0: port 1(vlan1) entering forwarding state
Jan 1 01:00:55 WNR3500L user.warn kernel: vlan2: Setting MAC address to 84 1b 5e da 6f 15.
Jan 1 01:00:55 WNR3500L user.debug kernel: vlan2: add 33:33:00:00:00:01 mcast address to master interface
Jan 1 01:00:55 WNR3500L user.debug kernel: vlan2: add 01:00:5e:00:00:01 mcast address to master interface
Jan 1 01:00:55 WNR3500L user.info kernel: IMQ starting with 2 devices...
Jan 1 01:00:55 WNR3500L user.info kernel: IMQ driver loaded successfully.
Jan 1 01:00:55 WNR3500L user.info kernel: Hooking IMQ after NAT on PREROUTING.
Jan 1 01:00:55 WNR3500L user.info kernel: Hooking IMQ before NAT on POSTROUTING.
Jan 1 01:00:55 WNR3500L user.info kernel: usb 1-1: configuration #1 chosen from 1 choice
Jan 1 01:00:55 WNR3500L user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 01:00:55 WNR3500L user.debug hotplug[535]: Attached USB device 1-1:1.0 [INTERFACE=8/6/80 PRODUCT=14cd/6116/200]
Jan 1 01:00:57 WNR3500L user.notice kernel: scsi 0:0:0:0: Direct-Access TOSHIBA MK2035GSS PQ: 0 ANSI: 0
Jan 1 01:00:57 WNR3500L user.notice kernel: sd 0:0:0:0: [sda] 390721967 512-byte hardware sectors (200050 MB)
Jan 1 01:00:57 WNR3500L user.notice kernel: sd 0:0:0:0: [sda] Write Protect is off
Jan 1 01:00:57 WNR3500L user.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
Jan 1 01:00:57 WNR3500L user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan 1 01:00:57 WNR3500L user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan 1 01:00:57 WNR3500L user.info kernel: sda: sda2 < sda5 >
Jan 1 01:00:57 WNR3500L user.notice kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Jan 1 01:00:57 WNR3500L authpriv.info dropbear[595]: Running in background
Jan 1 01:00:58 WNR3500L user.debug dhcpc-event[617]: 182: pptp peerdns disabled
Jan 1 01:00:58 WNR3500L user.info kernel: EXT3-fs: starting recovery.
Jan 1 01:00:58 WNR3500L daemon.info dnsmasq[619]: started, version 2.61 cachesize 1500
Jan 1 01:00:58 WNR3500L daemon.info dnsmasq[619]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack
Jan 1 01:00:58 WNR3500L user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 01:00:58 WNR3500L user.warn kernel: EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
Jan 1 01:00:58 WNR3500L daemon.info dnsmasq[619]: asynchronous logging enabled, queue limit is 5 messages
Jan 1 01:00:58 WNR3500L user.info kernel: EXT3 FS on sda5, internal journal
Jan 1 01:00:58 WNR3500L user.info kernel: EXT3-fs: recovery complete.
Jan 1 01:00:58 WNR3500L user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 01:00:58 WNR3500L user.info hotplug[603]: USB ext3 fs at /dev/sda5 mounted on /tmp/mnt/sda5
Jan 1 01:00:58 WNR3500L daemon.info dnsmasq-dhcp[619]: DHCP, IP range 192.168.1.2 -- 192.168.1.51, lease time 1d
Jan 1 01:00:58 WNR3500L daemon.info dnsmasq[619]: reading /etc/resolv.dnsmasq
Jan 1 01:00:58 WNR3500L daemon.info dnsmasq[619]: using nameserver 62.179.1.62#53
Jan 1 01:00:58 WNR3500L daemon.info dnsmasq[619]: using nameserver 62.179.1.63#53
Jan 1 01:00:58 WNR3500L daemon.info dnsmasq[619]: read /etc/hosts - 2 addresses
Jan 1 01:00:58 WNR3500L daemon.info dnsmasq[619]: read /etc/dnsmasq/hosts/hosts - 3 addresses
Jan 1 01:00:58 WNR3500L daemon.info dnsmasq-dhcp[619]: read /etc/dnsmasq/dhcp/dhcp-hosts
Jan 1 01:01:00 WNR3500L user.debug init[1]: starting rstats.
Jan 1 01:01:00 WNR3500L user.debug init[1]: starting cstats.
Jan 1 01:01:36 WNR3500L daemon.err nmbd[725]: Samba server WNR3500L is now a domain master browser for workgroup KLEX on subnet UNICAST_SUBNET
Jan 1 01:01:36 WNR3500L user.notice root: Transmission daemon successfully stoped
Jan 1 01:01:36 WNR3500L user.info init[1]: Netgear WNR3500L v2: Tomato 1.28.0000 MIPSR2-105-PL K26 USB BT-VPN
Feb 19 15:15:34 WNR3500L daemon.err nmbd[725]: Samba server WNR3500L is now a domain master browser for workgroup KLEX on subnet 192.168.1.1
Feb 19 15:15:38 WNR3500L user.notice root: Transmission daemon successfully started
Feb 19 15:15:41 WNR3500L daemon.info transmission-daemon[1138]: Transmission 2.76 (13786) started (session.c:722)
Feb 19 15:15:41 WNR3500L daemon.info transmission-daemon[1138]: RPC Server Adding address to whitelist: 127.0.0.1 (rpc-server.c:803)
Feb 19 15:15:41 WNR3500L daemon.info transmission-daemon[1138]: RPC Server Serving RPC and Web requests on port 127.0.0.1:9091/transmission/ (rpc-server.c:997)
Feb 19 15:15:41 WNR3500L daemon.info transmission-daemon[1138]: RPC Server Password required (rpc-server.c:1004)
Feb 19 15:15:41 WNR3500L daemon.err transmission-daemon[1138]: UDP Failed to set receive buffer: requested 4194304, got 225280 (tr-udp.c:77)
Feb 19 15:15:41 WNR3500L daemon.info transmission-daemon[1138]: UDP Please add the line "net.core.rmem_max = 4194304" to /etc/sysctl.conf (tr-udp.c:82)
Feb 19 15:15:41 WNR3500L daemon.err transmission-daemon[1138]: UDP Failed to set send buffer: requested 1048576, got 225280 (tr-udp.c:88)
Feb 19 15:15:41 WNR3500L daemon.info transmission-daemon[1138]: UDP Please add the line "net.core.wmem_max = 1048576" to /etc/sysctl.conf (tr-udp.c:93)
Feb 19 15:15:41 WNR3500L daemon.info transmission-daemon[1138]: Using settings from "/tmp/mnt/sda5/.settings" (daemon.c:517)
Feb 19 15:15:41 WNR3500L daemon.info transmission-daemon[1138]: Saved "/tmp/mnt/sda5/.settings/settings.json" (bencode.c:1733)
Feb 19 15:15:44 WNR3500L daemon.info dnsmasq-dhcp[619]: DHCPDISCOVER(br0) 24:ec:99:4e:97:57
Feb 19 15:15:44 WNR3500L daemon.info dnsmasq-dhcp[619]: DHCPOFFER(br0) 192.168.1.29 24:ec:99:4e:97:57
Feb 19 15:15:44 WNR3500L daemon.info dnsmasq-dhcp[619]: DHCPREQUEST(br0) 192.168.1.29 24:ec:99:4e:97:57
Feb 19 15:15:44 WNR3500L daemon.info dnsmasq-dhcp[619]: DHCPACK(br0) 192.168.1.29 24:ec:99:4e:97:57 COM-MID1
Feb 19 15:15:48 WNR3500L daemon.info transmission-daemon[1138]: Port Forwarding Starting (port-forwarding.c:93)
Feb 19 15:15:49 WNR3500L daemon.err nmbd[725]: Samba name server WNR3500L is now a local master browser for workgroup KLEX on subnet 192.168.1.1
Feb 19 15:15:51 WNR3500L cron.err crond[626]: time disparity of 22688054 minutes detected
Feb 19 15:16:23 WNR3500L daemon.info transmission-daemon[1138]: Searching for web interface file "//.local/share/transmission/web/index.html" (platform.c:537)
Feb 19 15:16:23 WNR3500L daemon.info transmission-daemon[1138]: Searching for web interface file "/usr/share/transmission/web/index.html" (platform.c:537)
Feb 19 15:16:40 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_new_block: Allocating block in system zone - blocks from 33554626, length 2
Feb 19 15:16:42 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_new_block: Allocating block in system zone - blocks from 33554630, length 1
Feb 19 15:16:45 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_new_block: Allocating block in system zone - blocks from 33554632, length 1
Feb 19 15:16:46 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 1025, block = 33587201
Feb 19 15:16:46 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_new_block: Allocating block in system zone - blocks from 33587201, length 1
Feb 19 15:16:46 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 1026, block = 33619969
Feb 19 15:16:46 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_new_block: Allocating block in system zone - blocks from 33619969, length 1
Feb 19 15:16:46 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 1027, block = 33652737
Feb 19 15:16:46 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_new_block: Allocating block in system zone - blocks from 33652737, length 1
Feb 19 15:16:46 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 1028, block = 33685505
Feb 19 15:16:46 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_new_block: Allocating block in system zone - blocks from 33685505, length 1
Feb 19 15:16:46 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 1029, block = 33718273
Feb 19 15:16:46 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_new_block: Allocating block in system zone - blocks from 33718273, length 1
Feb 19 15:16:46 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 1030, block = 33751041
Feb 19 15:16:46 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_new_block: Allocating block in system zone - blocks from 33751041, length 1
Feb 19 15:16:46 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 1031, block = 33783809
Feb 19 15:16:46 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_new_block: Allocating block in system zone - blocks from 33783809, length 1
Feb 19 15:16:46 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 1032, block = 33816577
Feb 19 15:16:46 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_new_block: Allocating block in system zone - blocks from 33816577, length 1
Feb 19 15:16:46 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 1033, block = 33849345
Feb 19 15:16:46 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_new_block: Allocating block in system zone - blocks from 33849345, length 1
Feb 19 15:16:46 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 1034, block = 33882113
Feb 19 15:16:46 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_new_block: Allocating block in system zone - blocks from 33882113, length 1
Feb 19 15:16:46 WNR3500L user.crit kernel: EXT3-fs error (device sda5): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 1035, block = 33914881
Feb 19 15:16:46 WNR3500L user.emerg kernel: Assertion failure in journal_dirty_metadata() at fs/jbd/transaction.c:1153: "handle->h_buffer_credits > 0"
Feb 19 15:16:46 WNR3500L user.warn kernel: Kernel bug detected[#1]:
Feb 19 15:16:46 WNR3500L user.warn kernel: Cpu 0
Feb 19 15:16:46 WNR3500L user.warn kernel: $ 0 : 00000000 00000000 0000006e 802afd20
Feb 19 15:16:46 WNR3500L user.warn kernel: $ 4 : 802afd20 00000001 ffffffff 0000270d
Feb 19 15:16:46 WNR3500L user.warn kernel: $ 8 : 00000001 ffffffff 00000000 d14723b2
Feb 19 15:16:46 WNR3500L user.warn kernel: $12 : 75586cbc 0000000e 00000481 00000000
Feb 19 15:16:46 WNR3500L user.warn kernel: $16 : 84d471a4 84d65748 87548880 87b4b380
Feb 19 15:16:46 WNR3500L user.warn kernel: $20 : 85bf63ec 0205ffff 00008000 87298c00
Feb 19 15:16:46 WNR3500L user.warn kernel: $24 : 00000000 800f954c
Feb 19 15:16:46 WNR3500L user.warn kernel: $28 : 87c02000 87c03960 ffffffff c00f1f7c
Feb 19 15:16:46 WNR3500L user.warn kernel: Hi : 00000000
Feb 19 15:16:46 WNR3500L user.warn kernel: Lo : 9aa70000
Feb 19 15:16:46 WNR3500L user.warn kernel: epc : c00f1f7c Tainted: P
Feb 19 15:16:46 WNR3500L user.warn kernel: ra : c00f1f7c Status: 1100bc03 KERNEL EXL IE
Feb 19 15:16:46 WNR3500L user.warn kernel: Cause : 00000024
Feb 19 15:16:46 WNR3500L user.warn kernel: PrId : 00019749
Feb 19 15:16:46 WNR3500L user.warn kernel: Modules linked in: ip6table_mangle ip6table_filter xt_recent xt_IMQ imq ehci_hcd vfat fat ext2 ext3 jbd mbcache usb_storage sd_mod scsi_wait_scan scsi_mod usbcore nf_nat_pptp nf_conntrack_pptp nf_nat_proto_gre nf_conntrack_proto_gre nf_nat_ftp nf_conntrack_ftp nf_nat_sip nf_conntrack_sip nf_nat_h323 nf_conntrack_h323 wl(P) dnsmq(P) et(P) igs(P) emf(P)
Feb 19 15:16:46 WNR3500L user.warn kernel: Process transmission-da (pid: 1142, threadinfo=87c02000, task=87fdc000)
Feb 19 15:16:46 WNR3500L user.warn kernel: Stack : c00f1cc0 c00f9e94 c00fa1e0 00000481 c00fa5ec 84d65748 00000001 84d65748
Feb 19 15:16:46 WNR3500L user.warn kernel: 85bf63ec c00b509c 02058000 c00b2408 872ee400 87298c00 85843714 020580ff
Feb 19 15:16:46 WNR3500L user.warn kernel: 02058000 85843700 00000001 020580ff 02058000 85843700 c009e6ec c009e684
Feb 19 15:16:46 WNR3500L user.warn kernel: c00ad364 c00ad348 87298c00 00000001 ffffffff 87c039e0 85843714 87298c00
Feb 19 15:16:46 WNR3500L user.warn kernel: 00000001 84d65748 0205ffff 02058000 85843714 c00ad348 0000040b 0000040b
Feb 19 15:16:46 WNR3500L user.warn kernel: ...
Feb 19 15:16:46 WNR3500L user.warn kernel: Call Trace:[][][][][][][][][][][][][][][][][][][<80003204>][<80001640>]
Feb 19 15:16:46 WNR3500L user.warn kernel: Code: 24422ad4 0040f809 24070481 <0200000d> 0803c76f 8e820004 1000ff92 00000000 27bdffd0
Feb 19 15:17:01 WNR3500L user.notice root: Transmission stopped? Starting...
Feb 19 15:17:01 WNR3500L user.notice root: Transmission daemon successfully stoped
Feb 19 15:17:02 WNR3500L user.notice root: Transmission daemon successfully stoped
Feb 19 15:18:01 WNR3500L user.notice root: Transmission stopped? Starting...
Feb 19 15:18:01 WNR3500L user.notice root: Transmission daemon successfully stoped
Feb 19 15:18:02 WNR3500L user.notice root: Transmission daemon successfully stoped
Feb 19 15:19:01 WNR3500L user.notice root: Transmission stopped? Starting...
Feb 19 15:19:01 WNR3500L user.notice root: Transmission daemon successfully stoped
Feb 19 15:19:02 WNR3500L user.notice root: Transmission daemon successfully stoped
Feb 19 15:20:01 WNR3500L user.notice root: Transmission stopped? Starting...
Feb 19 15:20:01 WNR3500L user.notice root: Transmission daemon successfully stoped
Feb 19 15:20:02 WNR3500L user.notice root: Transmission daemon successfully stoped
Feb 19 15:21:01 WNR3500L user.notice root: Transmission stopped? Starting...
Feb 19 15:21:01 WNR3500L user.notice root: Transmission daemon successfully stoped
Feb 19 15:21:02 WNR3500L user.notice root: Transmission daemon successfully stoped
Feb 19 15:22:01 WNR3500L user.notice root: Transmission stopped? Starting...
Feb 19 15:22:01 WNR3500L user.notice root: Transmission daemon successfully stoped
Feb 19 15:22:02 WNR3500L user.notice root: Transmission daemon successfully stoped
Feb 19 15:23:01 WNR3500L user.notice root: Transmission stopped? Starting...
Feb 19 15:23:01 WNR3500L user.notice root: Transmission daemon successfully stoped
Feb 19 15:23:02 WNR3500L user.notice root: Transmission daemon successfully stoped
Edytowany przez Jabol dnia 19-02-2013 15:27
|
| |
|
|
| shibby |
Dodano 19-02-2013 15:47
|
SysOp
Posty: 17109
Dołączył: 15/01/2009 20:30
|
przeciez u ciebie wyraznie widac ze sypie się dysk. Jak więc transmission ma się nie wywalac?
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 3x 2TB SSD, Intel X710-DA2 SFP+
VM Router: OpenWRT 22.03.4
VM NAS: Synology SA6400
VM VPS: Debian, WWW, Home Assistant
Switch: Netgear MS510TXPP
Switch: Ubiquiti USW-Flex-mini - szt. 2
Wi-Fi: Ubiquiti U6-Lite - szt. 2
|
| |
|
|
| Jabol |
Dodano 19-02-2013 16:56
|
User
Posty: 12
Dołączył: 21/12/2012 17:50
|
czemu sypie?? Dysk działał normalnie w kompie wcześniej i nie było z ni żadnych problemów ;/
Edit.
Narazie jest zabawnie bo dysk po sformatowaniu i podłączeniu jako NTFS działa bez problemów najmniejszych a po sformatowaniu jako EXT3 wiesza sie transmision jak i dysk ;/
Edytowany przez Jabol dnia 20-02-2013 10:22
|
| |
|
|
| grz3si3k |
Dodano 19-02-2013 17:08
|
Super User
Posty: 630
Dołączył: 28/06/2008 17:19
|
@Jabol, zacznij od fsck !
A teraz mały bug (tak myślę):
Wersja Tomato: K26USB-1.28.RT-MIPSR2-106-AIO-EN oraz Tomato: K26USB-1.28.RT-MIPSR2-107-AIO-EN
Nazwa routera/Model: rt-n16
Opis błędu/problemu: zakładka Port Forwarding/UPNP/NAT - brak informacji o otwartych portach i połączeniach w UPNP
Czy może ktoś sprawdzić, czy problem jest tylko u mnie, czy również inni maja to samo?
Edytowany przez grz3si3k dnia 28-02-2013 17:24
RT-AC68U
|
| |
|
|
| papiex |
Dodano 20-02-2013 11:29
|
User
Posty: 7
Dołączył: 30/04/2008 15:16
|
U mnie to samo. |
| |
|
|
| maciej2 |
Dodano 22-02-2013 09:17
|
Super User
Posty: 418
Dołączył: 19/12/2010 16:35
|
Wersja 104 w zakładce: USB i NAS -> klient torrent
Ścieżka zapisu ustawień: Własna i mam ustawione na opt/etc/transmission/
A mimo to on włącza transmission ze ścieżkąopt/etc/transmission/.settings
Nie wiem jak w nowszych bulidach.
ASUS RT-AC66U v B1 - Asuswrt-Merlin
ASUS WL-500gP v2 - FreshTomato
|
| |
|
|
| grz3si3k |
Dodano 28-02-2013 17:19
|
Super User
Posty: 630
Dołączył: 28/06/2008 17:19
|
widze że Forwarded Ports w nowej wersji 107, też nie wyświetla informacji o otrwartych portach. Kurcze szkoda, bo potrzebuje tej usługi działającej!
http://openlinksys.info/forum/viewthr...ost_117992
znów proszę o potwierdzenie że inni również mają lub nie z tym problem.
Edytowany przez grz3si3k dnia 28-02-2013 17:29
RT-AC68U
|
| |
|
|
| kamilj |
Dodano 28-02-2013 17:31
|
Moderator
Posty: 982
Dołączył: 28/12/2011 12:24
|
U mnie Forwarded Ports pokazuje otwarte porty...
------------------------------------------------------------------------------
[b] RegulaminOpenlinksys.info v0.1
[url=http://openlinksys.info/forum/viewthread.p |
| |
|
|
| grz3si3k |
Dodano 28-02-2013 17:34
|
Super User
Posty: 630
Dołączył: 28/06/2008 17:19
|
@kamilj, ale na innym ruterze chyba..
Ok poproszę o info tych co maja RT-n16, dzieki.
edit:
"wyczyściłem" ruter, ustawiłem od nowa z "palca" i niestety efekt taki sam.
Nic nie pokazuje mimo iż oczywiście UPNP działa poprawnie.
Edytowany przez grz3si3k dnia 28-02-2013 18:00
RT-AC68U
|
| |
|
|
| kamilj |
Dodano 28-02-2013 17:48
|
Moderator
Posty: 982
Dołączył: 28/12/2011 12:24
|
Zapomniałem zaktualizować podpis 
Pytałeś się czy ktoś inny ma problem nie napisałeś że chodzi ci o osoby które maja Asus-a RT-N16
------------------------------------------------------------------------------
[b] RegulaminOpenlinksys.info v0.1
[url=http://openlinksys.info/forum/viewthread.p |
| |
|
|
| csmkjp |
Dodano 28-02-2013 18:21
|
User
Posty: 81
Dołączył: 28/05/2009 14:58
|
Panie grz3si3k
1.
advanced > firewall - Forwarded Only
2.
Port Forwarding > UPNP/NAT - Enable UPnP |
| |
|
|
| grz3si3k |
Dodano 28-02-2013 18:27
|
Super User
Posty: 630
Dołączył: 28/06/2008 17:19
|
Panie @csmkjp
POWAŻNIE ?
A łyżka na to: Nie możliwe...
Ja mowie o prezentacji usługi w GUI, która nie wyświetla się od wersji 106 i 107, a nie jak ustawić żeby się wyświetlało!
Do wersji 105 działało poprawnie.
Proszę czytać ze zrozumieniem.
@BUENO
dzieki za info.
Edytowany przez grz3si3k dnia 28-02-2013 20:23
RT-AC68U
|
| |
|
|
| BUENO |
Dodano 28-02-2013 18:41
|
User
Posty: 33
Dołączył: 17/04/2011 18:24
|
U mnie też nie wyświetla na 107 RT-N16.
TOYA-NET 120 Mb + TEL/2TV Modem CISCO EPC3208 > ASUS RT-N66U> 4 Komputery 
|
| |
|
|
| ghoes |
Dodano 28-02-2013 19:22
|
User
Posty: 106
Dołączył: 06/07/2011 19:42
|
potwierdzam, to samo w wersji 106 i 107... (Asus RT-N16)
|
| |
|
|
| sszpila |
Dodano 28-02-2013 19:24
|
User
Posty: 147
Dołączył: 20/08/2009 10:59
|
Na moim RT-N16 tak samo. Upnp działa, regułki pojawiają się w łańcuchu upnp w iptables, ale GUI nie wyświetla przekierowanych portów
APU2E4 4GB OpenWRT Snapshot
UAP-AC LITE
Xpenology@Microserver gen8
|
| |
|
' target='_blank'>Link
