1280x720 -f 25 # ~8,75mbit/s 

1280x720 -f 15 # ~6mbit/s 

1280x720 -f 5  # ~3,3mbit/s 

640x480  -f 10 # ~2,2mbit/s 

320x240  -f 25 # ~2,0mbit/s 

640x480  -f 5  # ~1,4mbit/s 

320x240  -f 2  # ~0,9mbit/s 

#!/bin/sh 

ADDRESS='aaaadres' 

PORT1=111

PORT2=333

USER='uzyszkodnik' 

PASSWORD='łord' 

 

cleanup() 

{ 

echo "Removing kernel modules"; 

rmmod uvcvideo.ko 

sleep 1 

rmmod v4l2-int-device.ko 

sleep 1 

rmmod v4l2-common.ko 

sleep 1 

rmmod videodev.ko 

sleep 1 

rmmod input-core.ko 

exit 0 

} 

 

if [ -z "`lsmod | grep uvcvideo`" ] then 

echo "=============Inserting needed kernel modules===========" 

insmod /opt/extras-mips2/input-core.ko 

insmod /opt/extras-mips2/videodev.ko 

insmod /opt/extras-mips2/v4l2-common.ko 

insmod /opt/extras-mips2/v4l2-int-device.ko 

insmod /opt/extras-mips2/uvcvideo.ko 

echo "=============Adding input firewall rule=============" 

iptables -A INPUT -p tcp --dport $PORT1 -j ACCEPT 

iptables -I INPUT -p tcp --dport $PORT2 -j ACCEPT # -I oznacza dodanie reguły na początek łańcucha, -A na koniec

else 

echo ">>>>>>Kernel modules already inserted<<<<<<<" 

fi 

 

echo -e "Usage:\n$ADDRESS:$PORT1/?action=stream\n$ADDRESS:$PORT1/?action=snapshot" 

echo -e "Usage:\n$ADDRESS:$PORT2/?action=stream\n$ADDRESS:$PORT2/?action=snapshot"

 

trap cleanup INT TERM 

 

export LD_LIBRARY_PATH=/opt/lib/mjpg-streamer/ 

 

# 2x C270 HUB pasywny ~1,2mbit/s  

mjpg_streamer -i "/opt/lib/mjpg-streamer/input_uvc.so -d /dev/video0 -r 640x480 -f 4 -l off" -o "/opt/lib/mjpg-streamer/output_http.so -p $PORT1 -c $USER:$PASSWORD" -b 

mjpg_streamer -i "/opt/lib/mjpg-streamer/input_uvc.so -d /dev/video1 -r 640x480 -f 4 -l off" -o "/opt/lib/mjpg-streamer/output_http.so -p $PORT2 -c $USER:$PASSWORD" -b