Forum: [MOD] Tomato 1.28 ND USB na kernelu 2.6

Feb 19 22:49:18 unknown daemon.info pppoe[385]: Sending LCP Termination-Request
Feb 19 22:49:18 unknown daemon.info pppoe[385]: Received LCP Termination-Ack
Feb 19 22:49:18 unknown daemon.info pppoe[385]: Connection terminated.
Feb 19 22:49:18 unknown daemon.notice pppoe[385]: Disconnected.
Feb 19 22:49:18 unknown daemon.notice pppoe[385]: Connect time 45.1 minutes.

Feb 19 23:11:57 unknown daemon.info pppoe[971]: Sending LCP Termination-Request
Feb 19 23:11:57 unknown daemon.info pppoe[971]: Received LCP Termination-Ack
Feb 19 23:11:57 unknown daemon.info pppoe[971]: Connection terminated.
Feb 19 23:11:57 unknown daemon.notice pppoe[971]: Disconnected.
Feb 19 23:11:57 unknown daemon.notice pppoe[971]: Connect time 22.6 minutes.

Feb 19 23:32:05 unknown daemon.info pppoe[1234]: Sending LCP Termination-Request
Feb 19 23:32:05 unknown daemon.info pppoe[1234]: Received LCP Termination-Ack
Feb 19 23:32:05 unknown daemon.info pppoe[1234]: Connection terminated.
Feb 19 23:32:05 unknown daemon.notice pppoe[1234]: Disconnected.
Feb 19 23:32:05 unknown daemon.notice pppoe[1234]: Connect time 20.1 minutes.

$ wget ftp://192.168.40.1/sda1/a.bin -O /dev/null
--2010-02-20 12:30:41-- ftp://192.168.40.1/sda1/a.bin
=> `/dev/null'
Łączenie się z 192.168.40.1:21... połączono.
Logowanie się jako anonymous ... Zalogowano się!
==> SYST ... zrobiono. ==> PWD ... zrobiono.
==> TYPE I ... zrobiono. ==> CWD (1) /sda1 ... zrobiono.
==> SIZE a.bin ... 2347244018
==> PASV ... zrobiono. ==> RETR a.bin ... zrobiono.
Długość: 2347244018 (2,2G) (nie autorytatywne)

100%[===================================>] 2.347.244.018 4,87M/s w 6m 40s

2010-02-20 12:37:21 (5,60 MB/s) - zapisano `/dev/null' [2347244018]

Kod Pobierz kod źródłowy

# dmesg 

Linux version 2.6.22.19 (root@tomato) (gcc version 4.2.4) #1 Wed Feb 17 22:53:08 EST 2010

CPU revision is: 00019740

Found a 8MB ST compatible serial flash

Determined physical RAM map:

 memory: 04000000 @ 00000000 (usable)

Entering add_active_range(0, 0, 16384) 0 entries of 256 used

Zone PFN ranges:

  Normal          0 ->    16384

  HighMem     16384 ->    16384

early_node_map[1] active PFN ranges

    0:        0 ->    16384

On node 0 totalpages: 16384

  Normal zone: 0 pages used for memmap

  Normal zone: 0 pages reserved

  Normal zone: 16384 pages, LIFO batch:3

  HighMem zone: 0 pages used for memmap

Built 1 zonelists.  Total pages: 16384

Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200

Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.

Primary data cache 32kB, 4-way, linesize 32 bytes.

Synthesized TLB refill handler (20 instructions).

Synthesized TLB load handler fastpath (32 instructions).

Synthesized TLB store handler fastpath (32 instructions).

Synthesized TLB modify handler fastpath (31 instructions).

PID hash table entries: 512 (order: 9, 2048 bytes)

CPU: BCM4716 rev 1 pkg 10 at 453 MHz

Using 226.500 MHz high precision timer.

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory: 61256k/65536k available (2074k kernel code, 4220k reserved, 441k data, 116k init, 0k highmem)

SLUB: Genslabs=17, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1

Calibrating delay loop... 225.28 BogoMIPS (lpj=112640)

Mount-cache hash table entries: 512

NET: Registered protocol family 16

PCI: Using membase 8000000

PCI: Disabled

PCI: Fixing up bus 0

PCI: Fixing up bus 1

Time: MIPS clocksource has been installed.

NET: Registered protocol family 2

IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

TCP established hash table entries: 2048 (order: 2, 16384 bytes)

TCP bind hash table entries: 2048 (order: 1, 8192 bytes)

TCP: Hash tables configured (established 2048 bind 2048)

TCP reno registered

squashfs: version 3.0 (2006/03/15) Phillip Lougher

io scheduler noop registered (default)

HDLC line discipline: version $Revision: 4.8 $, maxframe=4096

N_HDLC line discipline registered.

Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled

serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A

PPP generic driver version 2.4.2

PPP BSD Compression module registered

NET: Registered protocol family 24

pflash: found no supported devices

Creating 6 MTD partitions on "sflash":

0x00000000-0x00040000 : "pmon"

0x00040000-0x007e0000 : "linux"

0x00118fcc-0x00540000 : "rootfs"

0x00540000-0x007e0000 : "jffs2"

0x007f0000-0x00800000 : "nvram"

0x007e0000-0x007f0000 : "board_data"

GACT probability NOT on

Mirror/redirect action on

netem: version 1.2

u32 classifier

    Performance counters on

    input device check on 

    Actions configured 

Netfilter messages via NETLINK v0.30.

nf_conntrack version 0.5.0 (512 buckets, 4096 max)

ip_tables: (C) 2000-2006 Netfilter Core Team

NET: Registered protocol family 1

NET: Registered protocol family 17

802.1Q VLAN Support v1.8 Ben Greear 

All bugs added by David S. Miller 

VFS: Mounted root (squashfs filesystem) readonly.

Freeing unused kernel memory: 116k freed

Warning: unable to open an initial console.

et: module license 'unspecified' taints kernel.

PCI: Setting latency timer of device 0000:00:02.0 to 64

eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.56.46

PCI: Setting latency timer of device 0000:00:01.0 to 64

eth1: Broadcom BCM4329 802.11 Wireless Controller 5.10.56.46

net/ipv4/netfilter/tomato_ct.c [Feb 17 2010 22:59:09]

Algorithmics/MIPS FPU Emulator v1.5

nf_conntrack_rtsp v0.6.21 loading

nf_nat_rtsp v0.6.21 loading

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

SCSI subsystem initialized

Initializing USB Mass Storage driver...

usbcore: registered new interface driver usb-storage

USB Mass Storage support registered.

PCI: Setting latency timer of device 0000:00:04.1 to 64

ehci_hcd 0000:00:04.1: EHCI Host Controller

ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1

ehci_hcd 0000:00:04.1: irq 5, io mem 0x18004000

ehci_hcd 0000:00:04.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004

usb usb1: configuration #1 chosen from 1 choice

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

vlan1: add 01:00:5e:00:00:01 mcast address to master interface

usb 1-1: new high speed USB device using ehci_hcd and address 2

vlan1: dev_set_promiscuity(master, 1)

device eth0 entered promiscuous mode

device vlan1 entered promiscuous mode

device eth1 entered promiscuous mode

br0: port 2(eth1) entering learning state

br0: port 1(vlan1) entering learning state

br0: topology change detected, propagating

br0: port 2(eth1) entering forwarding state

br0: topology change detected, propagating

br0: port 1(vlan1) entering forwarding state

vlan2: Setting MAC address to  00 26 f2 ba d6 ff.

vlan2: add 01:00:5e:00:00:01 mcast address to master interface

usb 1-1: configuration #1 chosen from 1 choice

scsi0 : SCSI emulation for USB Mass Storage devices

usb-storage: device found at 2

usb-storage: waiting for device to settle before scanning

scsi 0:0:0:0: Direct-Access     Generic  USB Disk         9.02 PQ: 0 ANSI: 2

sd 0:0:0:0: [sda] 117304992 512-byte hardware sectors (60060 MB)

sd 0:0:0:0: [sda] Write Protect is off

sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00

sd 0:0:0:0: [sda] Assuming drive cache: write through

sd 0:0:0:0: [sda] 117304992 512-byte hardware sectors (60060 MB)

sd 0:0:0:0: [sda] Write Protect is off

sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00

sd 0:0:0:0: [sda] Assuming drive cache: write through

 sda: sda1

sd 0:0:0:0: [sda] Attached SCSI disk

usb-storage: device scan complete