|
[MOD] Tomato by shibby
|
| LEVY_pl |
Dodano 11-03-2016 22:25
|
User
Posty: 13
Dołączył: 26/06/2014 22:19
|
R7000 + tomato 132 K26ARM USB AIO-64K na łączu 250/20 śmiga jak złoto ( z CFT i bez - nie zauważam róznicy) |
| |
|
|
| vfiuchcikicshuusrch |
Dodano 12-03-2016 13:15
|
User
Posty: 66
Dołączył: 07/10/2014 14:31
|
i have rt56u router.
everytime when i reboot my router, usb3.0 flash, not mounted at all!!!
this was and in older firmware.
to fix that, i turn off/on Core USB Support and flash will be visible in attached devices. but still not mounted. i reboot router, and if luck with me, usb3.0 will mounted correctly. if not, i reboot one more time.
this very bad.
why it is happend ?
may be fix is ?
Asus RT-AC56U + FreshTomato-ARM-2019.3.220-beta-AIO
|
| |
|
|
| Adooni |
Dodano 12-03-2016 14:15
|
VIP
Posty: 2359
Dołączył: 02/02/2011 04:29
|
@vf... how are you mounting usb3.0 flash? I hope you are not using Automount
try to mount device puting command in scripts > firewall
sleep 10
/bin/mount LABEL=opt /opt
Orange 300/50 Mb/s + ONT Terminal
HPE MS gen8 Proxmox 7.0-11 VMs: Router OPNsense 23.X-amd64 and OMV
HPE MicroServer gen8: Xeon E3-1265Lv2, 16GB (2x KTH-PL316E/8G), HP 331T, 4x4TB WD RED
Asus RT-AC68U AccessPoint
|
| |
|
|
| vfiuchcikicshuusrch |
Dodano 12-03-2016 15:22
|
User
Posty: 66
Dołączył: 07/10/2014 14:31
|
yes, i'm use automount.
why it is bad ?
thanks i'm trying your method to mount.
Połączony z 12 marzec 2016 15:36:39:
no. it is not working.
because, my usbflash not visible in /dev like any sda1,2,3 (3 partions)
after turn off/on core usb support, /dev/sda - become visible, but no one partitions.
after reboot router all ok. and automounting - fine works too.
Edytowany przez vfiuchcikicshuusrch dnia 12-03-2016 15:36
Asus RT-AC56U + FreshTomato-ARM-2019.3.220-beta-AIO
|
| |
|
|
| Adooni |
Dodano 12-03-2016 16:54
|
VIP
Posty: 2359
Dołączył: 02/02/2011 04:29
|
what file system are you using? ext3/4? For router you should not use NTFS or FAT
if you have enable please disable usb1.1 support
do you have USB3.0 flash connected to router via usb3.0 or 2.0 usb port?
it is possibile that your device require a lot of power and this is the reason that sometimes it is recognized or not - did you tryied to use active (with outside power sorce) usb hub? You can try to turn off all function like wi-fi etc to see if then USB pen will work if yes for sure you just need to use additional power sorce like active hub.
automounting is bad way to do that for me this function should not exist at all
Orange 300/50 Mb/s + ONT Terminal
HPE MS gen8 Proxmox 7.0-11 VMs: Router OPNsense 23.X-amd64 and OMV
HPE MicroServer gen8: Xeon E3-1265Lv2, 16GB (2x KTH-PL316E/8G), HP 331T, 4x4TB WD RED
Asus RT-AC68U AccessPoint
|
| |
|
|
| vfiuchcikicshuusrch |
Dodano 12-03-2016 17:02
|
User
Posty: 66
Dołączył: 07/10/2014 14:31
|
usb3.0 with ext3 file system
usb1.1 is disabled everytime at all.
i connect usb3.0 flash via usb3.0 port.
if I'm connect this flash via usb2.0 it work perfectly, but i need more speed.
i'm use usb3.0 flash 32Gb. not portable hdd.
Asus RT-AC56U + FreshTomato-ARM-2019.3.220-beta-AIO
|
| |
|
|
| Adooni |
Dodano 12-03-2016 17:07
|
VIP
Posty: 2359
Dołączył: 02/02/2011 04:29
|
try connect your device using active usb3.0 hub
Orange 300/50 Mb/s + ONT Terminal
HPE MS gen8 Proxmox 7.0-11 VMs: Router OPNsense 23.X-amd64 and OMV
HPE MicroServer gen8: Xeon E3-1265Lv2, 16GB (2x KTH-PL316E/8G), HP 331T, 4x4TB WD RED
Asus RT-AC68U AccessPoint
|
| |
|
|
| vfiuchcikicshuusrch |
Dodano 12-03-2016 17:15
|
User
Posty: 66
Dołączył: 07/10/2014 14:31
|
i'm no have usb3.0 hub 
when i restart router, ls /dev have no 2-1 device, sda(1,2,3) and usbdev2.2
when i turn off/on core usb support, 2-1 device and usbdev2.2 and sda(not 1,2,3 just sda) will be shown in /dev
nothing to mount.
when i restart router again, it is to be ok mounted and work fine maybe month or two, while i'm not restart it again.
Połączony z 12 marzec 2016 17:38:15:
i see blink and blink_5g process in runtime, but only power led shining.
Edytowany przez vfiuchcikicshuusrch dnia 12-03-2016 17:38
Asus RT-AC56U + FreshTomato-ARM-2019.3.220-beta-AIO
|
| |
|
|
| qwerty321 |
Dodano 13-03-2016 16:50
|
Super User
Posty: 571
Dołączył: 27/04/2014 18:11
|
Could you please explain why do we need to put these commands to the "scripts > firewall" but not "Init"? What is the difference? |
| |
|
|
| Adooni |
Dodano 14-03-2016 06:49
|
VIP
Posty: 2359
Dołączył: 02/02/2011 04:29
|
It was explained long time ago by Shibby. "Init" is execute 1st and is possible that not all modules will be on when you will try to mount HDD therefore "firewall" tab should be used.
Orange 300/50 Mb/s + ONT Terminal
HPE MS gen8 Proxmox 7.0-11 VMs: Router OPNsense 23.X-amd64 and OMV
HPE MicroServer gen8: Xeon E3-1265Lv2, 16GB (2x KTH-PL316E/8G), HP 331T, 4x4TB WD RED
Asus RT-AC68U AccessPoint
|
| |
|
|
| tomasiek |
Dodano 14-03-2016 08:26
|
User
Posty: 36
Dołączył: 14/12/2014 17:21
|
In this post Shibby says something completely different. |
| |
|
|
| Adooni |
Dodano 14-03-2016 08:30
|
VIP
Posty: 2359
Dołączył: 02/02/2011 04:29
|
ok I need to modify it than but I did not had any issue with it before. It is good that evryday I am learning something new.
Orange 300/50 Mb/s + ONT Terminal
HPE MS gen8 Proxmox 7.0-11 VMs: Router OPNsense 23.X-amd64 and OMV
HPE MicroServer gen8: Xeon E3-1265Lv2, 16GB (2x KTH-PL316E/8G), HP 331T, 4x4TB WD RED
Asus RT-AC68U AccessPoint
|
| |
|
|
| roccogiani |
Dodano 14-03-2016 09:44
|
User
Posty: 46
Dołączył: 22/09/2013 13:21
|
Czy nowe Tomato by Shibby v133/134 ma wdudowany adblock? |
| |
|
|
| shibby |
Dodano 14-03-2016 09:54
|
SysOp
Posty: 17109
Dołączył: 15/01/2009 20:30
|
nie, jeszcze nie zakończyłem prac nad tą funkcjonalnością.
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 3x 2TB SSD, Intel X710-DA2 SFP+
VM Router: OpenWRT 22.03.4
VM NAS: Synology SA6400
VM VPS: Debian, WWW, Home Assistant
Switch: Netgear MS510TXPP
Switch: Ubiquiti USW-Flex-mini - szt. 2
Wi-Fi: Ubiquiti U6-Lite - szt. 2
|
| |
|
|
| gandalf |
Dodano 14-03-2016 10:34
|
User
Posty: 109
Dołączył: 17/06/2007 17:52
|
Pewnie będzie w nowym, obiecanym v.135
Asus RT-AC68U Asuswrt-Merlin 384.9
+ HDD 1TB --- OwnCloud 8.0.11
APC UPS 700
QNAP 251 (16GB RAM) - 12TB
|
| |
|
|
| shibby |
Dodano 14-03-2016 10:45
|
SysOp
Posty: 17109
Dołączył: 15/01/2009 20:30
|
w v135 nie będzie jeszcze adblocka wbudowanego.
v135 właśnie się kompiluje i będzie poprawionym v134 jeżeli chodzi o MultiWANa. Nic więcej.
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 3x 2TB SSD, Intel X710-DA2 SFP+
VM Router: OpenWRT 22.03.4
VM NAS: Synology SA6400
VM VPS: Debian, WWW, Home Assistant
Switch: Netgear MS510TXPP
Switch: Ubiquiti USW-Flex-mini - szt. 2
Wi-Fi: Ubiquiti U6-Lite - szt. 2
|
| |
|
|
| gandalf |
Dodano 14-03-2016 10:52
|
User
Posty: 109
Dołączył: 17/06/2007 17:52
|
Cytat shibby napisał(a):
w v135 nie będzie jeszcze adblocka wbudowanego.
v135 właśnie się kompiluje i będzie poprawionym v134 jeżeli chodzi o MultiWANa. Nic więcej.
To może lepiej poczekać jeszcze ten tydzień  i zaktualizować za jednym razem
Asus RT-AC68U Asuswrt-Merlin 384.9
+ HDD 1TB --- OwnCloud 8.0.11
APC UPS 700
QNAP 251 (16GB RAM) - 12TB
|
| |
|
|
| b3rok |
Dodano 14-03-2016 11:37
|
Administrator
Posty: 621
Dołączył: 10/01/2008 18:40
|
Wątpię, że wdrożenie adblocka potrwa tydzień. Gdyby sprawa była łatwa i prosta to adblock już dawno byłby zintegrowany z Tomato.
I. Huawei HG8240 + 1x Netgear r7000 @FreshTomato + Synology DS1512+
II. TP-Link TL-WDR4300 @Obsy OpenWRT Gargoyle
III. TP-Link TL-WDR3600 @Obsy OpenWRT Gargyle
|
| |
|
|
| qwerty321 |
Dodano 14-03-2016 15:40
|
Super User
Posty: 571
Dołączył: 27/04/2014 18:11
|
Cytat b3rok napisał(a):
Wątpię, że wdrożenie adblocka potrwa tydzień. Gdyby sprawa była łatwa i prosta to adblock już dawno byłby zintegrowany z Tomato.
No tak ale co ze stronami po HTTPS? Przecież kończenie połaczenia to szyfrowanie end-to-end. Po drodze pakietu nie widać co w nim siedzi. |
| |
|
|
| ovner |
Dodano 14-03-2016 16:34
|
Power User
Posty: 368
Dołączył: 15/08/2009 21:34
|
Jak dobrze rozumie nie będzie wersji v134 na MIPSELe tylko odrazu v135 z poprawną obsługą modemów 3G
TUF-AX5400 @ Firmware:388.1_0-gnuton1
RT-N16 @ FreshTomato Firmware 2023.3 MIPSR2 K26 USB VPN + Huawei e3372 no-hilink
 |
| |
|
' target='_blank'>Link
