|
[MOD] Tomato by shibby
|
| Radi |
Dodano 17-07-2015 08:47
|
User
Posty: 142
Dołączył: 27/01/2007 14:07
|
Dzięki jack78, teraz dodatkowo oprócz zatwierdzenia zainstawałem certyfikat. Już nie krzyczy 
Mam jeszcze jedno pytanie odnośnie Tendy.
Właściwie zakupiłem ją po to, by WiFi szybciej działało. Na WRT54GL max to 20mbit, łącze mam 50mbit ...więc trochę odłogiem leżało.
Na Tendzie chcę uruchmić standard N i liczę, że około 40/45 mi wyciągnie ...
Czy tak będzie? Tenda da radę?
Radi
Asus RT-N66U - FreshTomato Firmware 2020.7 MIPSR2 K26AC USB AIO-64K
TENDA N60 - FreshTomato Firmware 2020.2 MIPSR2 K26 USB Max
|
| |
|
|
| jack78 |
Dodano 17-07-2015 08:54
|
OL Maniac
Posty: 1365
Dołączył: 22/04/2007 22:28
|
Wydaje mi się że dawałem radę 70mbit z niej wyciągnąłem, ale testy robiłem dawno, więc pewności nie mam. Na pewno po kablu (WAN-LAN) daje radę około 120-130mbit, a potem procek już nie wyrabia.
Edytowany przez jack78 dnia 17-07-2015 08:59
Mikrotik hAP ac2
UniFi AP AC v2-OFW, UniFi AP PRO- OpenWRT,
Linksys E1000v2 - Tomato-RT-N5x-MIPSR2-116-Hyzoom.4M-Mini
Tenda AC10 - AC1200 OFW
NAS - HP Microserver Gen8 i3-3220T, 8GB RAM 5x 3TB WD RED | Xpenology
|
| |
|
|
| Radi |
Dodano 17-07-2015 08:57
|
User
Posty: 142
Dołączył: 27/01/2007 14:07
|
Jakby dała radę 40-45 to już będę zadowolony (po WiFi).
Ważne, by była szybsza niż WRT54GL.
Dzięki.
Radi
Asus RT-N66U - FreshTomato Firmware 2020.7 MIPSR2 K26AC USB AIO-64K
TENDA N60 - FreshTomato Firmware 2020.2 MIPSR2 K26 USB Max
|
| |
|
|
| shibby |
Dodano 17-07-2015 13:12
|
SysOp
Posty: 17109
Dołączył: 15/01/2009 20:30
|
W głównym drzewie K26Rt-N zrobiłem katalog "Tenda N60 initial files" i tam jest init i instrukcja. Myślę, że to wystarczy. Podobnie jest w K26ARM jeżeli chodzi i pliki init dla netgearów Rxxx.
http://tomato.groov.pl/download/K26RT-N/Tenda%20N60%20initial%20files/
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 3x 2TB SSD, Intel X710-DA2 SFP+
VM Router: OpenWRT 22.03.4
VM NAS: Synology SA6400
VM VPS: Debian, WWW, Home Assistant
Switch: Netgear MS510TXPP
Switch: Ubiquiti USW-Flex-mini - szt. 2
Wi-Fi: Ubiquiti U6-Lite - szt. 2
|
| |
|
|
| kille72 |
Dodano 17-07-2015 13:58
|
Administrator
Posty: 2986
Dołączył: 12/02/2007 23:43
|
Dzieki @shibby.
Jaka jest najlatwiejsza metoda na blokowanie niektorych stron https? |
| |
|
|
| qwerty321 |
Dodano 17-07-2015 14:12
|
Super User
Posty: 571
Dołączył: 27/04/2014 18:11
|
Dzisiaj mam awarię. Shibby tylko Ty będziesz rozumiał. OPENDNS.dnscrypt włączony. Dzisiaj nie było możliwości pobrania czasu. Router nie pobierał czasu i już więc opendns też nie działał i nie działa dalej. Musiałem podać statyczne adresy dns w tych polach powyżej, wyłączyłem oba ptaszki od opendns i zaczęło działać.
Ty pisałeś, że masz tam na stałę wpisane w źródłach serwery NTP aby najpierw pobrać czas. Może te serwery zbanowały mój adres albo nie działają? Czy by nie można podawać ręcznie tych serwerów NTP albo zrobić ze dwa pola na dodatkowe, podawane ręcznie?
Shibby poproszę wyjaśnij mi mechanizm działania statycznie podanych adresów DNS gdy oba ptaszki od DNSCRYPT/opendns są włączone? Czy router użyje ich raz do pobrania czasu i przestanie ich używać czy one przejmą kontrolę nad serwerem dns w routerze?
To powinno tak działać, że jak podam nawet 8.8.8.8 i zaznaczę DNSCRYPT/opendns to googlowy dns zostanie użyty tylko do czasu aż nie wstanie opendns albo wręcz tylko to pobrania czasu z NTP
Edytowany przez qwerty321 dnia 17-07-2015 14:18
|
| |
|
|
| shibby |
Dodano 17-07-2015 14:41
|
SysOp
Posty: 17109
Dołączył: 15/01/2009 20:30
|
w zrodlach dnscrypt jest programik hostip. Służy do rozwiązywania nazw hosta do ip. Tomato za jego pomocą rozwiązuje adresy serwerów NTP do ip i wpisuje do pliku /etc/hosts. W ten sposób router nie musi odpytywać DNSa o serwery NTP i powinien być w stanie pobrać dzięki temu czas. Gdy czas będzie poprawny to dnscrypt zweryfikuje poprawność certyfikatów użytych do połączenia tunelu i całość zacznie działać.
Wniosek: możliwe, że z jakiegoś powodu hostip nie rozwiązał nazw serwerów NTP do ip, przez co nie można było pobrać aktualnego czasu.
Źródła hostip
https://bitbucket.org/pl_shibby/tomato-arm/src/b50dd042845ef1f242bb9ca2b39d669135966621/release/src-rt-6.x.4708/router/dnscrypt/src/hostip/?at=shibby-arm
w pliku options.c widzimy
define DEFAULT_RESOLVER_IP "8.8.8.8"
zatem chyba wszystko jasne
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 3x 2TB SSD, Intel X710-DA2 SFP+
VM Router: OpenWRT 22.03.4
VM NAS: Synology SA6400
VM VPS: Debian, WWW, Home Assistant
Switch: Netgear MS510TXPP
Switch: Ubiquiti USW-Flex-mini - szt. 2
Wi-Fi: Ubiquiti U6-Lite - szt. 2
|
| |
|
|
| qwerty321 |
Dodano 17-07-2015 15:26
|
Super User
Posty: 571
Dołączył: 27/04/2014 18:11
|
Cytat shibby napisał(a):
w pliku options.c widzimy
define DEFAULT_RESOLVER_IP "8.8.8.8"
zatem chyba wszystko jasne :)
Jasne ale z jakiegoś powodu dzisiaj przychodzą ludzie do pracy, ping działa ale w logach czas i data jak po zimnym restarcie i nic nie pomaga. WAN jest startyczny po IP. Najprostrzy z możliwych. Będę restartował routery wieczorem, bo teraz się boję ruszać któregokolwiek. Ale tamten ciekawe, mogłem wejść z netu po https po adresie IP i z putty też. Ale w logach dalej czas nie taki. Pomogło wpisanie statycznych dns i wyłączenie obu ptaszkó od opendns. Nie robiłem więcej prób, bo musieli pracować. Wieczorem zabawię się jak pójdą ale coś było nie tak. Znam tomato doskonale :-) Mam pod opieką już z 10 routerów :-) Swojego też nie restartowałem, bo się boję co będzie. Napiszę wieczorem jak zrobię inne testy.
Połączony z 17 July 2015 20:12:31:
Shibby pamiętasz jak niedawno pisalśmy o pppoe? Teraz mam ten sam objaw na zwykłym wanie ze statycznym IP i dnscryptem.
Router długo nie pinguje się. Wstają pingi na 10 sekund, pingi znikają jakby się fizycznie restartował po czym znowu to długo trwa i wreszcie pobiera czas. To ten router z dzisiaj
Jan 1 01:00:10 RT-803773ee2818 syslog.info syslogd started: BusyBox v1.23.2
Jan 1 01:00:10 RT-803773ee2818 user.notice kernel: klogd started: BusyBox v1.23.2 (2015-06-08 08:45:02 CEST)
Jan 1 01:00:10 RT-803773ee2818 user.notice kernel: Linux version 2.6.22.19 (root@tomato) (gcc version 4.2.4) #2 Mon Jun 8 09:31:21 CEST 2015
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: CPU revision is: 00019749
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: Determined physical RAM map:
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: memory: 07fff000 @ 00000000 (usable)
Jan 1 01:00:10 RT-803773ee2818 user.debug kernel: Entering add_active_range(0, 0, 32767) 0 entries of 256 used
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: Zone PFN ranges:
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: Normal 0 -> 32767
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: HighMem 32767 -> 32767
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: early_node_map[1] active PFN ranges
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: 0: 0 -> 32767
Jan 1 01:00:10 RT-803773ee2818 user.debug kernel: On node 0 totalpages: 32767
Jan 1 01:00:10 RT-803773ee2818 user.debug kernel: Normal zone: 0 pages used for memmap
Jan 1 01:00:10 RT-803773ee2818 user.debug kernel: Normal zone: 0 pages reserved
Jan 1 01:00:10 RT-803773ee2818 user.debug kernel: Normal zone: 32767 pages, LIFO batch:7
Jan 1 01:00:10 RT-803773ee2818 user.debug kernel: HighMem zone: 0 pages used for memmap
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: Built 1 zonelists. Total pages: 32767
Jan 1 01:00:10 RT-803773ee2818 user.notice kernel: Kernel command line: root=/dev/mtdblock15 console=ttyS0,115200
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: Primary data cache 32kB, 4-way, linesize 32 bytes.
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: Synthesized TLB refill handler (20 instructions).
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: PID hash table entries: 512 (order: 9, 2048 bytes)
Jan 1 01:00:10 RT-803773ee2818 user.err syslog: module usbcore not found in modules.dep
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: CPU: BCM5357 rev 2 pkg 10 at 480 MHz
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: Using 240.000 MHz high precision timer.
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: console [ttyS0] enabled
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: Memory: 126464k/131068k available (33k kernel code, 4452k reserved, 2957k data, 128k init, 0k highmem)
Jan 1 01:00:10 RT-803773ee2818 user.debug kernel: Calibrating delay loop... 239.20 BogoMIPS (lpj=1196032)
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: Mount-cache hash table entries: 512
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: NET: Registered protocol family 16
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: usbcore: registered new interface driver usbfs
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: usbcore: registered new interface driver hub
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: usbcore: registered new device driver usb
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: PCI: no core
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: PCI: no core
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: PCI: Fixing up bus 0
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: NET: Registered protocol family 2
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: Time: MIPS clocksource has been installed.
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: TCP: Hash tables configured (established 4096 bind 4096)
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: TCP reno registered
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: squashfs: version 3.0 (2006/03/15) Phillip Lougher
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: io scheduler noop registered (default)
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: N_HDLC line discipline registered.
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: serial8250: ttyS0 at MMIO 0xb8000300 (irq = 8) is a 16550A
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: PPP generic driver version 2.4.2
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: MPPE/MPPC encryption/compression module registered
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: NET: Registered protocol family 24
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: PPPoL2TP kernel driver, V0.18.3
Jan 1 01:00:10 RT-803773ee2818 user.info kernel: PPTP driver version 0.8.5
Jan 1 01:00:10 RT-803773ee2818 user.err kernel: pflash: found no supported devices
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: Found an ST compatible serial flash with 0 64KB blocks; total size 0MB
Jan 1 01:00:10 RT-803773ee2818 user.err kernel: sflash: found no supported devices
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: Found a AMD NAND flash with 2048B pages or 128KB blocks; total size 128MB
Jan 1 01:00:10 RT-803773ee2818 user.notice kernel: nflash: squash filesystem with lzma found at block 6305
Jan 1 01:00:10 RT-803773ee2818 user.warn kernel: Boot partition size = 524288(0x80000)
Jan 1 01:00:10 RT-803773ee2818 user.notice kernel: Creating 16 MTD partitions on "nflash":
Jan 1 01:00:11 RT-803773ee2818 user.notice kernel: 0x00000000-0x00080000 : "boot"
Jan 1 01:00:11 RT-803773ee2818 user.notice kernel: 0x00080000-0x00200000 : "nvram"
Jan 1 01:00:11 RT-803773ee2818 user.notice kernel: 0x00200000-0x00240000 : "board_data"
Jan 1 01:00:11 RT-803773ee2818 user.notice kernel: 0x00240000-0x00280000 : "POT1"
Jan 1 01:00:11 RT-803773ee2818 user.notice kernel: 0x00280000-0x002c0000 : "POT2"
Jan 1 01:00:11 RT-803773ee2818 user.notice kernel: 0x002c0000-0x00300000 : "T_Meter1"
Jan 1 01:00:11 RT-803773ee2818 user.notice kernel: 0x00300000-0x00340000 : "T_Meter2"
Jan 1 01:00:11 RT-803773ee2818 user.notice kernel: 0x00340000-0x00380000 : "ML1"
Jan 1 01:00:11 RT-803773ee2818 user.notice kernel: 0x00380000-0x003c0000 : "ML2"
Jan 1 01:00:11 RT-803773ee2818 user.notice kernel: 0x003c0000-0x00400000 : "ML3"
Jan 1 01:00:11 RT-803773ee2818 user.notice kernel: 0x00400000-0x00440000 : "ML4"
Jan 1 01:00:11 RT-803773ee2818 user.notice kernel: 0x00440000-0x00480000 : "ML5"
Jan 1 01:00:11 RT-803773ee2818 user.notice kernel: 0x00480000-0x004c0000 : "ML6"
Jan 1 01:00:11 RT-803773ee2818 user.notice kernel: 0x004c0000-0x00500000 : "ML7"
Jan 1 01:00:11 RT-803773ee2818 user.notice kernel: 0x00500000-0x02000000 : "linux"
Jan 1 01:00:11 RT-803773ee2818 user.notice kernel: 0x00628490-0x02000000 : "rootfs"
Jan 1 01:00:11 RT-803773ee2818 user.warn kernel: _nvram_init: allocat header: 2280849408, size= 32768
Jan 1 01:00:11 RT-803773ee2818 user.info kernel: usbcore: registered new interface driver hiddev
Jan 1 01:00:11 RT-803773ee2818 user.info kernel: usbcore: registered new interface driver usbhid
Jan 1 01:00:11 RT-803773ee2818 user.info kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Jan 1 01:00:11 RT-803773ee2818 user.warn kernel: u32 classifier
Jan 1 01:00:11 RT-803773ee2818 user.warn kernel: OLD policer on
Jan 1 01:00:11 RT-803773ee2818 user.warn kernel: Netfilter messages via NETLINK v0.30.
Jan 1 01:00:11 RT-803773ee2818 user.warn kernel: nf_conntrack version 0.5.0 (1024 buckets, 8192 max)
Jan 1 01:00:11 RT-803773ee2818 user.warn kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 01:00:11 RT-803773ee2818 user.info kernel: ipt_account 0.1.21 : Piotr Gasidlo , http://www.barbara.eu.org/~quaker/ipt_account/
Jan 1 01:00:11 RT-803773ee2818 user.warn kernel: net/ipv4/netfilter/tomato_ct.c [Jun 8 2015 08:41:08]
Jan 1 01:00:11 RT-803773ee2818 user.info kernel: NET: Registered protocol family 1
Jan 1 01:00:11 RT-803773ee2818 user.info kernel: NET: Registered protocol family 10
Jan 1 01:00:11 RT-803773ee2818 user.warn kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 01:00:11 RT-803773ee2818 user.info kernel: NET: Registered protocol family 17
Jan 1 01:00:11 RT-803773ee2818 user.info kernel: 802.1Q VLAN Support v1.8 Ben Greear
Jan 1 01:00:11 RT-803773ee2818 user.info kernel: All bugs added by David S. Miller
Jan 1 01:00:11 RT-803773ee2818 user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan 1 01:00:11 RT-803773ee2818 user.info kernel: Freeing unused kernel memory: 128k freed
Jan 1 01:00:11 RT-803773ee2818 user.warn kernel: Warning: unable to open an initial console.
Jan 1 01:00:11 RT-803773ee2818 user.warn kernel: emf: module license 'Proprietary' taints kernel.
Jan 1 01:00:11 RT-803773ee2818 user.debug kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
Jan 1 01:00:11 RT-803773ee2818 user.warn kernel: eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.110.27.20012
Jan 1 01:00:11 RT-803773ee2818 user.warn kernel: wl_module_init: passivemode set to 0x0
Jan 1 01:00:11 RT-803773ee2818 user.debug kernel: PCI: Setting latency timer of device 0000:00:01.0 to 64
Jan 1 01:00:11 RT-803773ee2818 user.warn kernel: eth1: Broadcom BCM4329 802.11 Wireless Controller 5.110.27.20012
Jan 1 01:00:11 RT-803773ee2818 user.warn kernel: Algorithmics/MIPS FPU Emulator v1.5
Jan 1 01:00:11 RT-803773ee2818 user.notice kernel: SCSI subsystem initialized
Jan 1 01:00:11 RT-803773ee2818 user.info kernel: Initializing USB Mass Storage driver...
Jan 1 01:00:11 RT-803773ee2818 user.info kernel: usbcore: registered new interface driver usb-storage
Jan 1 01:00:11 RT-803773ee2818 user.info kernel: USB Mass Storage support registered.
Jan 1 01:00:11 RT-803773ee2818 user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 01:00:12 RT-803773ee2818 user.debug kernel: PCI: Setting latency timer of device 0000:00:04.1 to 64
Jan 1 01:00:12 RT-803773ee2818 user.info kernel: ehci_hcd 0000:00:04.1: EHCI Host Controller
Jan 1 01:00:12 RT-803773ee2818 user.info kernel: ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
Jan 1 01:00:12 RT-803773ee2818 user.info kernel: ehci_hcd 0000:00:04.1: EHCI Fastpath: New EHCI driver starting
Jan 1 01:00:12 RT-803773ee2818 user.info kernel: ehci_hcd 0000:00:04.1: irq 5, io mem 0x18004000
Jan 1 01:00:12 RT-803773ee2818 user.info kernel: ehci_hcd 0000:00:04.1: USB 0.0 started, EHCI 1.00
Jan 1 01:00:12 RT-803773ee2818 user.info kernel: usb usb1: configuration #1 chosen from 1 choice
Jan 1 01:00:12 RT-803773ee2818 user.info kernel: hub 1-0:1.0: USB hub found
Jan 1 01:00:12 RT-803773ee2818 user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 01:00:12 RT-803773ee2818 user.info kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2
Jan 1 01:00:12 RT-803773ee2818 user.info kernel: usb 1-1: configuration #1 chosen from 1 choice
Jan 1 01:00:12 RT-803773ee2818 user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 01:00:13 RT-803773ee2818 user.debug hotplug[463]: Attached USB device 1-0:1.0 [INTERFACE=9/0/0 PRODUCT=1d6b/2/206]
Jan 1 01:00:13 RT-803773ee2818 user.debug hotplug[484]: Attached USB device 1-1:1.0 [INTERFACE=8/6/80 PRODUCT=781/5572/127]
Jan 1 01:00:14 RT-803773ee2818 user.debug kernel: vlan1: add 33:33:00:00:00:01 mcast address to master interface
Jan 1 01:00:14 RT-803773ee2818 user.debug kernel: vlan1: add 01:00:5e:00:00:01 mcast address to master interface
Jan 1 01:00:14 RT-803773ee2818 user.info kernel: vlan1: dev_set_allmulti(master, 1)
Jan 1 01:00:15 RT-803773ee2818 user.notice kernel: scsi 0:0:0:0: Direct-Access SanDisk Cruzer Switch 1.27 PQ: 0 ANSI: 6
Jan 1 01:00:15 RT-803773ee2818 user.notice kernel: sd 0:0:0:0: [sda] 31266816 512-byte hardware sectors (16009 MB)
Jan 1 01:00:15 RT-803773ee2818 user.notice kernel: sd 0:0:0:0: [sda] Write Protect is off
Jan 1 01:00:15 RT-803773ee2818 user.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
Jan 1 01:00:15 RT-803773ee2818 user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan 1 01:00:15 RT-803773ee2818 user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan 1 01:00:15 RT-803773ee2818 user.info kernel: sda: sda1 sda2
Jan 1 01:00:15 RT-803773ee2818 user.notice kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk
Jan 1 01:00:15 RT-803773ee2818 user.info kernel: vlan1: dev_set_promiscuity(master, 1)
Jan 1 01:00:15 RT-803773ee2818 user.info kernel: device eth0 entered promiscuous mode
Jan 1 01:00:15 RT-803773ee2818 user.info kernel: device vlan1 entered promiscuous mode
Jan 1 01:00:17 RT-803773ee2818 user.info kernel: device eth1 entered promiscuous mode
Jan 1 01:00:17 RT-803773ee2818 user.info kernel: br0: port 2(eth1) entering forwarding state
Jan 1 01:00:17 RT-803773ee2818 user.info kernel: br0: port 1(vlan1) entering forwarding state
Jan 1 01:00:17 RT-803773ee2818 user.debug kernel: vlan2: add 33:33:00:00:00:01 mcast address to master interface
Jan 1 01:00:17 RT-803773ee2818 user.debug kernel: vlan2: add 01:00:5e:00:00:01 mcast address to master interface
Jan 1 01:00:17 RT-803773ee2818 user.info kernel: vlan2: dev_set_allmulti(master, 1)
Jan 1 01:00:17 RT-803773ee2818 user.info kernel: vlan2: dev_set_promiscuity(master, 1)
Jan 1 01:00:17 RT-803773ee2818 user.info kernel: device vlan2 entered promiscuous mode
Jan 1 01:00:17 RT-803773ee2818 user.info kernel: br1: port 1(vlan2) entering forwarding state
Jan 1 01:00:17 RT-803773ee2818 user.warn kernel: vlan10: Setting MAC address to 00 1e 17 1b c4 9c.
Jan 1 01:00:17 RT-803773ee2818 user.debug kernel: vlan10: add 33:33:00:00:00:01 mcast address to master interface
Jan 1 01:00:17 RT-803773ee2818 user.debug kernel: vlan10: add 01:00:5e:00:00:01 mcast address to master interface
Jan 1 01:00:17 RT-803773ee2818 user.info kernel: IMQ starting with 2 devices...
Jan 1 01:00:17 RT-803773ee2818 user.info kernel: IMQ driver loaded successfully.
Jan 1 01:00:17 RT-803773ee2818 user.info kernel: Hooking IMQ after NAT on PREROUTING.
Jan 1 01:00:17 RT-803773ee2818 user.info kernel: Hooking IMQ before NAT on POSTROUTING.
Jan 1 01:00:17 RT-803773ee2818 user.warn init[1]: firewall: (null): not using porzeczkowa17.dyndns.org for "IPv4" (could not resolve as valid remote management address)
Jan 1 01:00:17 RT-803773ee2818 user.warn init[1]: firewall: (null): not using porzeczkowa17.dyndns.org for "IPv6" (could not resolve as valid remote management address)
Jan 1 01:00:19 RT-803773ee2818 user.debug init[1]: 182: pptp peerdns disabled
Jan 1 01:00:21 RT-803773ee2818 daemon.info dnsmasq[627]: started, version 2.72+ cachesize 1500
Jan 1 01:00:21 RT-803773ee2818 daemon.info dnsmasq[627]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset Tomato-helper auth DNSSEC loop-detect
Jan 1 01:00:21 RT-803773ee2818 daemon.info dnsmasq[627]: DNSSEC validation enabled
Jan 1 01:00:21 RT-803773ee2818 daemon.info dnsmasq[627]: DNSSEC signature timestamps not checked until first cache reload
Jan 1 01:00:21 RT-803773ee2818 daemon.warn dnsmasq[627]: warning: interface tun22 does not currently exist
Jan 1 01:00:21 RT-803773ee2818 daemon.warn dnsmasq[627]: warning: interface tap21 does not currently exist
Jan 1 01:00:21 RT-803773ee2818 daemon.info dnsmasq[627]: asynchronous logging enabled, queue limit is 5 messages
Jan 1 01:00:21 RT-803773ee2818 daemon.info dnsmasq-dhcp[627]: DHCP, IP range 10.0.10.11 -- 10.0.10.99, lease time 1d
Jan 1 01:00:21 RT-803773ee2818 daemon.info dnsmasq-dhcp[627]: DHCP, IP range 192.168.10.102 -- 192.168.10.149, lease time 1d
Jan 1 01:00:21 RT-803773ee2818 daemon.info dnsmasq[627]: using nameserver 127.0.0.1#40
Jan 1 01:00:21 RT-803773ee2818 daemon.warn dnsmasq[627]: no servers found in /etc/resolv.dnsmasq, will retry
Jan 1 01:00:21 RT-803773ee2818 daemon.info dnsmasq[627]: read /etc/hosts - 3 addresses
Jan 1 01:00:22 RT-803773ee2818 daemon.info dnsmasq[627]: read /etc/dnsmasq/hosts/hosts - 3 addresses
Jan 1 01:00:22 RT-803773ee2818 daemon.info dnsmasq-dhcp[627]: read /etc/dnsmasq/dhcp/dhcp-hosts
Jan 1 01:00:24 RT-803773ee2818 user.warn kernel: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Jan 1 01:00:24 RT-803773ee2818 daemon.notice dnscrypt-proxy[652]: Starting dnscrypt-proxy 1.4.1
Jan 1 01:00:24 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Initializing libsodium for optimal performance
Jan 1 01:00:24 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Generating a new key pair
Jan 1 01:00:24 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Done
Jan 1 01:00:24 RT-803773ee2818 daemon.notice dnscrypt-proxy[654]: Starting dnscrypt-proxy 1.4.1
Jan 1 01:00:24 RT-803773ee2818 daemon.info dnscrypt-proxy[654]: Initializing libsodium for optimal performance
Jan 1 01:00:24 RT-803773ee2818 daemon.info dnscrypt-proxy[654]: Generating a new key pair
Jan 1 01:00:24 RT-803773ee2818 daemon.info dnscrypt-proxy[654]: Done
Jan 1 01:00:24 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Server certificate #1435874751 received
Jan 1 01:00:24 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: This certificate has not been activated yet
Jan 1 01:00:24 RT-803773ee2818 daemon.err dnscrypt-proxy[652]: No useable certificates found
Jan 1 01:00:24 RT-803773ee2818 daemon.err apcupsd[479]: apcupsd FATAL ERROR in linux-usb.c at line 609 Cannot find UPS device -- For a link to detailed USB trouble shooting information, please see .
Jan 1 01:00:24 RT-803773ee2818 daemon.err apcupsd[479]: apcupsd error shutdown completed
Jan 1 01:00:24 RT-803773ee2818 user.warn kernel: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Jan 1 01:00:24 RT-803773ee2818 daemon.notice ntpd[661]: ntpd 4.2.6p2@1.2194 Sat Feb 18 09:54:53 UTC 2012 (1)
Jan 1 01:00:24 RT-803773ee2818 daemon.notice ntpd[669]: proto: precision = 41.000 usec
Jan 1 01:00:24 RT-803773ee2818 daemon.info ntpd[669]: getconfig: Couldn't open
Jan 1 01:00:24 RT-803773ee2818 daemon.debug ntpd[669]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
Jan 1 01:00:24 RT-803773ee2818 daemon.info ntpd[669]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
Jan 1 01:00:24 RT-803773ee2818 daemon.info ntpd[669]: Listen and drop on 1 v6wildcard :: UDP 123
Jan 1 01:00:24 RT-803773ee2818 daemon.info ntpd[669]: Listen normally on 2 lo 127.0.0.1 UDP 123
Jan 1 01:00:24 RT-803773ee2818 daemon.info ntpd[669]: Listen normally on 3 vlan10 82.160.168.151 UDP 123
Jan 1 01:00:24 RT-803773ee2818 daemon.info ntpd[669]: Listen normally on 4 br0 192.168.10.100 UDP 123
Jan 1 01:00:24 RT-803773ee2818 daemon.info ntpd[669]: Listen normally on 5 br1 10.0.10.100 UDP 123
Jan 1 01:00:24 RT-803773ee2818 daemon.info ntpd[669]: Listen normally on 6 lo ::1 UDP 123
Jan 1 01:00:25 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Refetching server certificates
Jan 1 01:00:25 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Server certificate #1435874751 received
Jan 1 01:00:25 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: This certificate has not been activated yet
Jan 1 01:00:25 RT-803773ee2818 daemon.err dnscrypt-proxy[652]: No useable certificates found
Jan 1 01:00:28 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Refetching server certificates
Jan 1 01:00:28 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Server certificate #1435874751 received
Jan 1 01:00:28 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: This certificate has not been activated yet
Jan 1 01:00:28 RT-803773ee2818 daemon.err dnscrypt-proxy[652]: No useable certificates found
Jan 1 01:00:34 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Refetching server certificates
Jan 1 01:00:34 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Server certificate #1435874751 received
Jan 1 01:00:34 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: This certificate has not been activated yet
Jan 1 01:00:34 RT-803773ee2818 daemon.err dnscrypt-proxy[652]: No useable certificates found
Jan 1 01:00:43 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Refetching server certificates
Jan 1 01:00:43 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Server certificate #1435874751 received
Jan 1 01:00:43 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: This certificate has not been activated yet
Jan 1 01:00:43 RT-803773ee2818 daemon.err dnscrypt-proxy[652]: No useable certificates found
Jan 1 01:00:55 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Refetching server certificates
Jan 1 01:00:55 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Server certificate #1435874751 received
Jan 1 01:00:55 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: This certificate has not been activated yet
Jan 1 01:00:55 RT-803773ee2818 daemon.err dnscrypt-proxy[652]: No useable certificates found
Jan 1 01:01:10 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Refetching server certificates
Jan 1 01:01:10 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Server certificate #1435874751 received
Jan 1 01:01:10 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: This certificate has not been activated yet
Jan 1 01:01:10 RT-803773ee2818 daemon.err dnscrypt-proxy[652]: No useable certificates found
Jan 1 01:01:24 RT-803773ee2818 user.warn init[1]: firewall: (null): not using porzeczkowa17.dyndns.org for "IPv4" (could not resolve as valid remote management address)
Jan 1 01:01:28 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Refetching server certificates
Jan 1 01:01:28 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Server certificate #1435874751 received
Jan 1 01:01:28 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: This certificate has not been activated yet
Jan 1 01:01:28 RT-803773ee2818 daemon.err dnscrypt-proxy[652]: No useable certificates found
Jan 1 01:01:49 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Refetching server certificates
Jan 1 01:01:49 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Server certificate #1435874751 received
Jan 1 01:01:49 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: This certificate has not been activated yet
Jan 1 01:01:49 RT-803773ee2818 daemon.err dnscrypt-proxy[652]: No useable certificates found
Jan 1 01:02:13 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Refetching server certificates
Jan 1 01:02:13 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: Server certificate #1435874751 received
Jan 1 01:02:13 RT-803773ee2818 daemon.info dnscrypt-proxy[652]: This certificate has not been activated yet
Jan 1 01:02:13 RT-803773ee2818 daemon.err dnscrypt-proxy[652]: No useable certificates found
Jan 1 01:02:24 RT-803773ee2818 user.warn init[1]: firewall: (null): not using porzeczkowa17.dyndns.org for "IPv6" (could not resolve as valid remote management address)
Jul 17 20:07:54 RT-803773ee2818 daemon.info dnsmasq[627]: now checking DNSSEC signature timestamps
Jul 17 20:07:54 RT-803773ee2818 daemon.info dnsmasq[627]: read /etc/hosts - 15 addresses
Jul 17 20:07:54 RT-803773ee2818 daemon.info dnsmasq[627]: read /etc/dnsmasq/hosts/hosts - 3 addresses
Jul 17 20:07:54 RT-803773ee2818 daemon.info dnsmasq-dhcp[627]: read /etc/dnsmasq/dhcp/dhcp-hosts
Jul 17 20:07:55 RT-803773ee2818 daemon.info httpd[818]: Generating SSL certificate...
Jul 17 20:08:01 RT-803773ee2818 user.info kernel: tun: Universal TUN/TAP device driver, 1.6
Jul 17 20:08:01 RT-803773ee2818 user.info kernel: tun: (C) 1999-2004 Max Krasnyansky
Jul 17 20:08:05 RT-803773ee2818 user.info kernel: device tap21 entered promiscuous mode
Jul 17 20:08:05 RT-803773ee2818 user.info kernel: br0: port 3(tap21) entering forwarding state
Jul 17 20:08:05 RT-803773ee2818 daemon.notice openvpn[878]: OpenVPN 2.3.6 mipsel-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [EPOLL] [MH] [IPv6] built on Jun 8 2015
Jul 17 20:08:05 RT-803773ee2818 daemon.notice openvpn[878]: library versions: OpenSSL 1.0.2a 19 Mar 2015, LZO 2.08
Jul 17 20:08:05 RT-803773ee2818 daemon.warn openvpn[878]: NOTE: when bridging your LAN adapter with the TAP adapter, note that the new bridge adapter will often take on its own IP address that is different from what the LAN adapter was previously set to
Jul 17 20:08:05 RT-803773ee2818 user.info kernel: device tun22 entered promiscuous mode
Jul 17 20:08:05 RT-803773ee2818 daemon.notice openvpn[890]: OpenVPN 2.3.6 mipsel-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [EPOLL] [MH] [IPv6] built on Jun 8 2015
Jul 17 20:08:05 RT-803773ee2818 daemon.notice openvpn[890]: library versions: OpenSSL 1.0.2a 19 Mar 2015, LZO 2.08
Jul 17 20:08:06 RT-803773ee2818 daemon.notice openvpn[878]: Diffie-Hellman initialized with 2048 bit key
Jul 17 20:08:06 RT-803773ee2818 daemon.notice openvpn[878]: Socket Buffers: R=[112640->131072] S=[112640->131072]
Jul 17 20:08:06 RT-803773ee2818 daemon.notice openvpn[878]: TUN/TAP device tap21 opened
Jul 17 20:08:06 RT-803773ee2818 daemon.notice openvpn[878]: TUN/TAP TX queue length set to 100
Jul 17 20:08:06 RT-803773ee2818 daemon.notice openvpn[898]: UDPv4 link local (bound): [undef]
Jul 17 20:08:06 RT-803773ee2818 daemon.notice openvpn[898]: UDPv4 link remote: [undef]
Jul 17 20:08:06 RT-803773ee2818 daemon.notice openvpn[898]: MULTI: multi_init called, r=256 v=256
Jul 17 20:08:06 RT-803773ee2818 daemon.notice openvpn[898]: Initialization Sequence Completed
Jul 17 20:08:06 RT-803773ee2818 authpriv.warn dropbear[896]: Failed loading /etc/dropbear/dropbear_ecdsa_host_key
Jul 17 20:08:06 RT-803773ee2818 authpriv.info dropbear[900]: Running in background
Jul 17 20:08:07 RT-803773ee2818 daemon.info dnsmasq[627]: exiting on receipt of SIGTERM
Jul 17 20:08:07 RT-803773ee2818 daemon.notice openvpn[890]: Diffie-Hellman initialized with 2048 bit key
Jul 17 20:08:07 RT-803773ee2818 daemon.info dnsmasq[909]: started, version 2.72+ cachesize 1500
Jul 17 20:08:07 RT-803773ee2818 daemon.info dnsmasq[909]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset Tomato-helper auth DNSSEC loop-detect
Jul 17 20:08:07 RT-803773ee2818 daemon.info dnsmasq[909]: DNSSEC validation enabled
Jul 17 20:08:07 RT-803773ee2818 daemon.info dnsmasq[909]: DNSSEC signature timestamps not checked until first cache reload
Jul 17 20:08:07 RT-803773ee2818 daemon.warn dnsmasq[909]: warning: interface tun22 does not currently exist
Jul 17 20:08:07 RT-803773ee2818 daemon.warn dnsmasq[909]: warning: interface tap21 does not currently exist
Jul 17 20:08:07 RT-803773ee2818 daemon.info dnsmasq[909]: asynchronous logging enabled, queue limit is 5 messages
Jul 17 20:08:07 RT-803773ee2818 daemon.info dnsmasq-dhcp[909]: DHCP, IP range 10.0.10.11 -- 10.0.10.99, lease time 1d
Jul 17 20:08:07 RT-803773ee2818 daemon.info dnsmasq-dhcp[909]: DHCP, IP range 192.168.10.102 -- 192.168.10.149, lease time 1d
Jul 17 20:08:07 RT-803773ee2818 daemon.info dnsmasq[909]: using nameserver 127.0.0.1#40
Jul 17 20:08:07 RT-803773ee2818 daemon.warn dnsmasq[909]: no servers found in /etc/resolv.dnsmasq, will retry
Jul 17 20:08:07 RT-803773ee2818 daemon.info dnsmasq[909]: read /etc/hosts - 3 addresses
Jul 17 20:08:07 RT-803773ee2818 daemon.info dnsmasq[909]: read /etc/dnsmasq/hosts/hosts - 3 addresses
Jul 17 20:08:07 RT-803773ee2818 daemon.info dnsmasq-dhcp[909]: read /etc/dnsmasq/dhcp/dhcp-hosts
Jul 17 20:08:07 RT-803773ee2818 daemon.notice openvpn[890]: Socket Buffers: R=[112640->131072] S=[112640->131072]
Jul 17 20:08:07 RT-803773ee2818 daemon.notice openvpn[890]: TUN/TAP device tun22 opened
Jul 17 20:08:07 RT-803773ee2818 daemon.notice openvpn[890]: TUN/TAP TX queue length set to 100
Jul 17 20:08:07 RT-803773ee2818 daemon.notice openvpn[890]: do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Jul 17 20:08:07 RT-803773ee2818 daemon.notice openvpn[890]: /sbin/ifconfig tun22 10.8.0.1 pointopoint 10.8.0.2 mtu 1500
Jul 17 20:08:07 RT-803773ee2818 daemon.notice openvpn[890]: /sbin/route add -net 10.8.0.0 netmask 255.255.255.0 gw 10.8.0.2
Jul 17 20:08:07 RT-803773ee2818 daemon.notice openvpn[916]: UDPv4 link local (bound): [undef]
Jul 17 20:08:07 RT-803773ee2818 daemon.notice openvpn[916]: UDPv4 link remote: [undef]
Jul 17 20:08:07 RT-803773ee2818 daemon.notice openvpn[916]: MULTI: multi_init called, r=256 v=256
Jul 17 20:08:07 RT-803773ee2818 daemon.notice openvpn[916]: IFCONFIG POOL: base=10.8.0.4 size=62, ipv6=0
Jul 17 20:08:07 RT-803773ee2818 daemon.notice openvpn[916]: Initialization Sequence Completed
Jul 17 20:08:07 RT-803773ee2818 daemon.notice dnscrypt-proxy[933]: Starting dnscrypt-proxy 1.4.1
Jul 17 20:08:07 RT-803773ee2818 daemon.info dnscrypt-proxy[933]: Initializing libsodium for optimal performance
Jul 17 20:08:07 RT-803773ee2818 daemon.info dnscrypt-proxy[933]: Generating a new key pair
Jul 17 20:08:07 RT-803773ee2818 daemon.info dnscrypt-proxy[933]: Done
Jul 17 20:08:07 RT-803773ee2818 daemon.info dnsmasq[909]: now checking DNSSEC signature timestamps
Jul 17 20:08:07 RT-803773ee2818 daemon.info dnsmasq[909]: read /etc/hosts - 15 addresses
Jul 17 20:08:07 RT-803773ee2818 daemon.info dnsmasq[909]: read /etc/dnsmasq/hosts/hosts - 3 addresses
Jul 17 20:08:07 RT-803773ee2818 daemon.info dnsmasq-dhcp[909]: read /etc/dnsmasq/dhcp/dhcp-hosts
Jul 17 20:08:08 RT-803773ee2818 user.info init[1]: NGinX - daemon not enabled cancelled generation of config file
Jul 17 20:08:08 RT-803773ee2818 daemon.info dnscrypt-proxy[933]: Server certificate #1435874751 received
Jul 17 20:08:08 RT-803773ee2818 daemon.info dnscrypt-proxy[933]: This certificate looks valid
Jul 17 20:08:08 RT-803773ee2818 daemon.info dnscrypt-proxy[933]: Chosen certificate #1435874751 is valid from [2015-07-03] to [2016-07-02]
Jul 17 20:08:08 RT-803773ee2818 daemon.info dnscrypt-proxy[933]: Server key fingerprint is ED19:BFBA:FAFC:9257:DFDC:68C7:69BF:AC24:94CD:743F:3C1D:4966:134D:FE2C:4BDC:F315
Jul 17 20:08:08 RT-803773ee2818 daemon.notice dnscrypt-proxy[933]: Proxying from 127.0.0.1:40 to 208.67.220.220:443
Jul 17 20:08:08 RT-803773ee2818 daemon.notice dnscrypt-proxy[935]: Starting dnscrypt-proxy 1.4.1
Jul 17 20:08:08 RT-803773ee2818 daemon.info dnscrypt-proxy[935]: Initializing libsodium for optimal performance
Jul 17 20:08:08 RT-803773ee2818 daemon.info dnscrypt-proxy[935]: Generating a new key pair
Jul 17 20:08:08 RT-803773ee2818 daemon.info dnscrypt-proxy[935]: Done
Jul 17 20:08:08 RT-803773ee2818 user.debug init[1]: starting rstats.
Jul 17 20:08:08 RT-803773ee2818 user.debug init[1]: starting cstats.
Jul 17 20:08:10 RT-803773ee2818 user.notice root: Stoping NFS Server ...
Jul 17 20:08:12 RT-803773ee2818 user.notice root: Transmission daemon successfully stoped
Jul 17 20:08:12 RT-803773ee2818 user.info init[1]: Netgear WNR3500L v2: Tomato 1.28.0000 MIPSR2-130 K26 USB AIO
Jul 17 20:08:13 RT-803773ee2818 user.notice root: NFS Server stoped ...
Jul 17 20:08:13 RT-803773ee2818 user.notice root: MySQL successfully stoped
Edytowany przez kille72 dnia 17-07-2015 21:43
|
| |
|
|
| Marco76 |
Dodano 17-07-2015 20:51
|
Super User
Posty: 433
Dołączył: 08/03/2007 19:47
|
Ludzie, używajcie do wklejania listingów i logów znaczników CODE lub QUOTE...
 
Sorry za offtop.
[small] Pozdrawiam, Monter
Asus RT-N18 + FreshTomato 2019.3 K26ARM USB AIO-64K-NOSMP + ILHM v2
HTPC Chieftec FLYER FI-02BC-U3 + GA-H61N-USB3 + i3-3225 + 4GB RAM + LibreELEC + Xbox DVD Remot |
| |
|
|
| robert83 |
Dodano 17-07-2015 20:58
|
User
Posty: 60
Dołączył: 20/03/2011 15:12
|
czy takie wpisy w logach to coś niepokojącego? pojawiają się co ok 60 minut
Cytat Jul 17 20:16:19 unknown daemon.info dnscrypt-proxy[11449]: Refetching server certificates
Jul 17 20:16:19 unknown daemon.info dnscrypt-proxy[11449]: Server certificate #1435874751 received
Jul 17 20:16:19 unknown daemon.info dnscrypt-proxy[11449]: This certificate looks valid
Jul 17 20:16:19 unknown daemon.info dnscrypt-proxy[11449]: Chosen certificate #1435874751 is valid from [2015-07-03] to [2016-07-02]
Jul 17 20:16:19 unknown daemon.info dnscrypt-proxy[11449]: Server key fingerprint is ED19:BFBA:FAFC:9257  FDC:68C7:69BF:AC24:94CD:743F:3C1D:4966:134D:FE2C:4BDC:F315
Asus RT-AC56U Tomato Firmware K26ARM USB AIO-64K
|
| |
|
|
| Horpah |
Dodano 17-07-2015 21:36
|
User
Posty: 67
Dołączył: 14/05/2008 23:00
|
to akurat normalne
================================
Netgear WNR3500L v1 + pen 8GB z opt
|
| |
|
|
| Barticf |
Dodano 18-07-2015 07:47
|
Power User
Posty: 230
Dołączył: 15/05/2012 16:21
|
Jak ustawić statyczne przydzielanie adresów ip dla klientów openvpn ?
Mam folder ccd a w nim pliki z nazwą klienta a w nich wpisy
ifconfig-push 10.8.0.1 10.8.0.2 itd. ale niestety nie przydziela tak ip. |
| |
|
|
| joseph |
Dodano 18-07-2015 08:28
|
Power User
Posty: 210
Dołączył: 16/11/2012 13:36
|
Cytat Barticf napisał(a):
Jak ustawić statyczne przydzielanie adresów ip dla klientów openvpn ?
Mam folder ccd a w nim pliki z nazwą klienta a w nich wpisy
ifconfig-push 10.8.0.1 10.8.0.2 itd. ale niestety nie przydziela tak ip.
Basic- Static DHCP/ARP/IPT |
| |
|
|
| Barticf |
Dodano 18-07-2015 08:44
|
Power User
Posty: 230
Dołączył: 15/05/2012 16:21
|
Trzeba mieć adres mac klientów a takich info w logu nie ma
Jeszcze dodatkowo mam problem, że co jakieś 30 min serwer openvpn się restartuje i wali w logu read TCPv4_SERVER: Connection timed out (code=145)
Edytowany przez Barticf dnia 18-07-2015 08:53
|
| |
|
|
| compsjp |
Dodano 18-07-2015 22:30
|
User
Posty: 70
Dołączył: 25/05/2014 17:38
|
Cytat shibby napisał(a):
you can show me solution. I don`t have ipv6 6rd realy from my provider well i really don`t know how it should be fixed. If it will be simple to do then someone will fixed it many months ago.
I`m using HE tunnel and it`s working fine.
Remember: i am not a programmer. I am network administrator and Tomato is only my hobby.
@qwerty - moja sugestia była z pominięcie VPNa, bo wtedy jest on zbędny. Wystawiasz po prostu usługę FTP (i tylko FTP) na świat.
ADD the IPV6 lan router, theirs no active lan of ipv6 and the ipv6 6rd ip i get is shared, so need a active lan for ipv6 also. not a link-local ipv6 address.
basicly need a whole lan dhcp setup for ipV6 also. can you do that? am i making any type of notice?
1 RT-AC68U 128 SHIBBY AIO ARM
1 RT-N16 128 SHIBBY AIO K26
1 RT-N12(B1) DD-WRT v24-sp2 (05/27/13) mega
SOLD 1 rt-n12 128 SHIBBY MINI-IPV6
1 WNR2000V2 MIPSR2-128 K26 Mini ipv6
1 WNR2000V3 OpenWrt Barrier Breaker 14.07 / LuCI 0.12 Branch (0.12+git-15.
|
| |
|
|
| Theo16 |
Dodano 19-07-2015 08:39
|
User
Posty: 42
Dołączył: 27/12/2011 09:31
|
Czy am ktoś jakiś czytelny (i w miarę prosty) tutorial jak zainstalować blokowanie reklam na RT-N66U z tomato? |
| |
|
|
| Barticf |
Dodano 19-07-2015 10:02
|
Power User
Posty: 230
Dołączył: 15/05/2012 16:21
|
Średnio co 30 min/godzine wywala takie coś w logach
Jul 19 08:29:44 Asus daemon.err openvpn[29300]: client/ip:port read TCPv4_SERVER: Connection timed out (code=145)
Jul 19 08:29:44 Asus daemon.err openvpn[29300]: client/ip:port4 Connection reset, restarting [0]
Jul 19 08:29:44 Asus daemon.notice openvpn[29300]: client4/ip:port SIGUSR1[soft,connection-reset] received, client-instance restarting
Jul 19 08:29:44 Asus daemon.notice openvpn[29300]: TCP/UDP: Closing socket
Jul 19 08:29:46 Asus daemon.err openvpn[29300]: client2/ip:port read TCPv4_SERVER: Connection timed out (code=145)
Jul 19 08:29:46 Asus daemon.err openvpn[29300]: client2/ip:portConnection reset, restarting [0]
Jul 19 08:29:46 Asus daemon.notice openvpn[29300]: client3/ip:port SIGUSR1[soft,connection-reset] received, client-instance restarting
Jul 19 08:29:46 Asus daemon.notice openvpn[29300]: TCP/UDP: Closing socket
Jul 19 08:30:05 Asus daemon.notice openvpn[29300]: MULTI: multi_create_instance called |
| |
|
|
| Radi |
Dodano 19-07-2015 13:52
|
User
Posty: 142
Dołączył: 27/01/2007 14:07
|
Czołem,
Mam jeszcze dodatkowe pytanie odnośnie Tendy N60.
Do tego routera potrzebuje kupić tanią kartę sieciową na PCI z obsługą standardu N (taką, która faktycznie wyrobi to co da Tenda) ...
Czy możecie mi coś taniego dobrego doradzić?
Dzięki.
Radi
Połączony z 19 July 2015 16:19:44:
A może karta WiFI PCI ze standardem G będzie działała teraz szybciej na routerze Tenda (na Linksys max to 20mbit) .... ale może na Tendzie będzie to 40-45 i nie trzeba będzie zmieniać karty.... jak sądziecie?
Radi
Edytowany przez Radi dnia 19-07-2015 16:19
Asus RT-N66U - FreshTomato Firmware 2020.7 MIPSR2 K26AC USB AIO-64K
TENDA N60 - FreshTomato Firmware 2020.2 MIPSR2 K26 USB Max
|
| |
|
|
| kille72 |
Dodano 19-07-2015 16:47
|
Administrator
Posty: 2986
Dołączył: 12/02/2007 23:43
|
Cytat Radi napisał(a):
Połączony z 19 July 2015 16:19:44:
A może karta WiFI PCI ze standardem G będzie działała teraz szybciej na routerze Tenda (na Linksys max to 20mbit) .... ale może na Tendzie będzie to 40-45 i nie trzeba będzie zmieniać karty.... jak sądziecie?
Radi
802.11b - 2-3 Mbps downstream, up to 5-6 Mbps with some vendor-specific extensions.
802.11g - ~20 Mbps downstream
802.11n - 40-50 Mbps typical, varying greatly depending on configuration, whether it is mixed or N-only network, the number of bonded channels, etc. Specifying a channel, and using 40MHz channels can help achieve 70-80Mbps with some newer routers. Up to 100 Mbps achievable with more expensive commercial equipment with 8x8 arrays, gigabit ports, etc.
802.11ac - 70-100+ Mbps typical, higher speeds possible over short distances without many obstacles, with newer generation 802.11ac routers, and client adapters capable of multiple streams. |
| |
|
|
| Radi |
Dodano 19-07-2015 16:50
|
User
Posty: 142
Dołączył: 27/01/2007 14:07
|
OK, dzięki.
W takim razie bez karty z N nic szybciej nie będzie.
Jeszcze raz dziękuję za info.
Radi
Asus RT-N66U - FreshTomato Firmware 2020.7 MIPSR2 K26AC USB AIO-64K
TENDA N60 - FreshTomato Firmware 2020.2 MIPSR2 K26 USB Max
|
| |
|
' target='_blank'>Link
