po zmianie nrpacks przestało, więc może spróbujcie z innymi wartościami?

[root@router root]$lircd -d /dev/lirc0 /opt/etc/lirc/lircd.conf
[root@router root]$ irw
000000147aa50000 00 Play or24v
000000147aa50000 00 Play or24v
00000014fe290000 00 Pause or24v
00000014fe290000 00 Pause or24v
000000147da80000 00 Stop or24v

usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver usb-storage
usb usb1: configuration #1 chosen from 1 choice
usb usb2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
usblp: USB Printer Device Class driver
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
usb 2-2: new full speed USB device using ohci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2.3: new full speed USB device using ohci_hcd and address 3
usb 2-2.3: configuration #1 chosen from 1 choice
input: USB HID v1.00 Device [HID 041e:30d3] on usb-0000:00:04.0-2.3
usb 2-2.4: new low speed USB device using ohci_hcd and address 4
usb 2-2.4: configuration #1 chosen from 1 choice
usbhid: exports duplicate symbol hiddev_hid_event (owned by kernel)
usbhid: exports duplicate symbol hiddev_hid_event (owned by kernel)
usbcore: registered new interface driver snd-usb-audio
usbhid: exports duplicate symbol hiddev_hid_event (owned by kernel)
lirc_atiusb: USB remote driver for LIRC $Revision: 1.88 $
lirc_atiusb: Paul Miller
lirc_atiusb[4]: X10 WTI RF receiver on usb2:4
usbcore: registered new interface driver lirc_atiusb

Bus 002 Device 004: ID 0bc7:0006
Bus 002 Device 003: ID 041e:30d3
Bus 002 Device 002: ID 0e8f:0016
Bus 001 Device 002: ID 18a5:0302
Bus 002 Device 001: ID 1d6b:0001
Bus 001 Device 001: ID 1d6b:0002

Module Size Used by Tainted: P
lirc_atiusb 12992 0
lirc_dev 9984 1 lirc_atiusb
snd_usb_audio 57888 1
snd_usb_lib 12256 1 snd_usb_audio
snd_pcm_oss 39072 0
snd_mixer_oss 14656 2 snd_pcm_oss
snd_seq_midi 4128 0
snd_seq_midi_event 3840 1 snd_seq_midi
snd_rawmidi 16416 2 snd_usb_lib,snd_seq_midi
snd_seq 43728 2 snd_seq_midi,snd_seq_midi_event
snd_seq_device 4848 3 snd_seq_midi,snd_rawmidi,snd_seq
snd_pcm 53792 2 snd_usb_audio,snd_pcm_oss
snd_timer 15984 2 snd_seq,snd_pcm
snd_page_alloc 5520 1 snd_pcm
snd_hwdep 4976 1 snd_usb_audio
snd 37456 9 snd_usb_audio,snd_pcm_oss,snd_mixer_oss,snd_rawmidi,snd_seq,snd_seq_device,snd_pcm,snd_timer,snd_hwdep
soundcore 3760 2 snd
nls_cp852 3648 0
ip6table_mangle 992 0
ip6table_filter 704 0
xt_recent 6800 4
usblp 11312 0
ohci_hcd 17232 0
ehci_hcd 34640 0
vfat 9216 0
fat 46000 1 vfat
ext2 55520 2
ext3 113440 0
jbd 48352 1 ext3
mbcache 4528 2 ext2,ext3
usb_storage 33120 2
sd_mod 21408 3
scsi_wait_scan 384 0
scsi_mod 75488 3 usb_storage,sd_mod,scsi_wait_scan
nf_nat_pptp 1440 0
nf_conntrack_pptp 3808 1 nf_nat_pptp
nf_nat_proto_gre 1072 1 nf_nat_pptp
nf_conntrack_proto_gre 2464 1 nf_conntrack_pptp
nf_nat_ftp 1568 0
nf_conntrack_ftp 5792 1 nf_nat_ftp
nf_nat_sip 5920 0
nf_conntrack_sip 19008 1 nf_nat_sip
nf_nat_h323 5504 0
nf_conntrack_h323 37152 1 nf_nat_h323
wl 1781264 0
et 49280 0
igs 13680 1 wl
emf 17408 2 wl,igs

#
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database.
music_directory "/opt/music/"
#
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD.
#
playlist_directory "/opt/mpd/playlists/"
#
# This setting sets the location of the MPD database.
#
db_file "/opt/mpd/database"
#
# These settings are the locations for the daemon log files for the daemon.
#log_file "~/.mpd/log"
log_file "syslog"

bind_to_address "0.0.0.0"

#state_file /opt/etc/mpd.state

##############

input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
}

###############

audio_output {
type "oss"
name "Cheapo 3D Sound USB Device"
mixer_control "PHONEOUT" # For kernel 2.6 (alsa doing oss emulation)
# For 2.4, one of these should work. It all depends on the USB sound adapter
# mixer_control "vol" # For kernel 2.4 (oss). Whichever works
# mixer_control "PCM" # For kernel 2.4 (oss). Whichever works
# device "/dev/sound/dsp" # This might be needed for 2.4
}

zeroconf_enabled "no"

begin
prog = irexec
remote = or24v
button = Play
config = mpc toggle > /dev/null
repeat = 0
end

begin
prog = irexec
remote = or24v
button = Pause
config = mpc toggle > /dev/null
repeat = 0
end

begin
prog = irexec
remote = or24v
button = Rewind
config = mpc prev > /dev/null
repeat = 0
end

begin
prog = irexec
remote = or24v
button = Forward
config = mpc next > /dev/null
repeat = 0
end

begin
prog = irexec
remote = or24v
button = VolDown
config = mpc volume -10 > /dev/null
repeat = 0
end

begin
prog = irexec
remote = or24v
button = VolUp
config = mpc volume +10 > /dev/null
repeat = 0
end

begin
prog = irexec
remote = or24v
button = Mute
config = /opt/etc/lirc/mpdvolume
repeat = 0