|
[MOD] Tomato by kille72
|
| b3rok |
Dodano 04-07-2017 18:48
|
Administrator
Posty: 621
Dołączył: 10/01/2008 18:40
|
@kille72 - dzięki za włożoną pracę. Dzisiaj wymieniam mój router główny/brzegowy z RT-N66u na R7000. Wgram Twój testowy build i konfiguracja od 0. Będę testował intensywnie OpenVPN oraz zapasowego WANa.
Udanych wakacji!
I. Huawei HG8240 + 1x Netgear r7000 @FreshTomato + Synology DS1512+
II. TP-Link TL-WDR4300 @Obsy OpenWRT Gargoyle
III. TP-Link TL-WDR3600 @Obsy OpenWRT Gargyle
|
| |
|
|
| qwerty321 |
Dodano 04-07-2017 19:24
|
Super User
Posty: 571
Dołączył: 27/04/2014 18:11
|
Cytat kille72 napisał(a):
Jak ktoś się nudzi to wydałem testowa wersje ARM 2017.2_build58_AIO do ....
Super! W nocy wgram do swojego N18U, który pracuje jako główny.
Zobaczymy co z tym adblockiem, NTP i dnscrypt.
Jak pisałem wcześniej, poprzednia wersja uruchamiała adblocka zanim jeszcze czas z NTP został pobrany i zanim się odpalił właściwie dnscrypt, przez co adblock nie umiał rozwiązać nazw hostów z bazami spamerów.
Dzisiaj to dogłębnie przetestuję z czyszczeniem NVRAM, jak pódą użytkownicy spać.
|
| |
|
|
| jurekk |
Dodano 04-07-2017 19:30
|
OL Maniac
Posty: 1411
Dołączył: 28/11/2012 18:19
|
miłych wakacji kille - od stycznia odwaliłeś kupę dobrej roboty , dzięki jeszcze raz , najnowsza wersja testowa działa ok ;-)
AX3000 v2 Tomato
ea6500v2 @Ac66u_B1 @1000 Aimesh
ea6700v cfe (custom) @AC66u_B1 node
node Aimesh,
|
| |
|
|
| kille72 |
Dodano 04-07-2017 20:01
|
Administrator
Posty: 2986
Dołączył: 12/02/2007 23:43
|
Cytat b3rok napisał(a):
@kille72 - dzięki za włożoną pracę. Dzisiaj wymieniam mój router główny/brzegowy z RT-N66u na R7000. Wgram Twój testowy build i konfiguracja od 0. Będę testował intensywnie OpenVPN oraz zapasowego WANa.
Udanych wakacji! Cytat jurekk napisał(a):
miłych wakacji kille - od stycznia odwaliłeś kupę dobrej roboty , dzięki jeszcze raz , najnowsza wersja testowa działa ok ;-)
Dziękuję! Tylko od stycznia? Dłubie już od 2016-09-01  https://exotic.se/tomato-arm/changelo...ngelog.txt. Wersja 2017.2 będzie miała mega mega długa listę zmian, dlatego testuje już build59 żeby nie było niespodzianek jak wyjdzie wersja publiczna.
Tu mówimy o dobrym teamwork! Mało siedzę ostatnio na OpenLinksys bo większość czasu przebywam na LI gdzie współpracuje z takimi guru jak:
@pedro @RMerlin @Toastman @AndreDVJ @Jacky444 @koitsu @M_ars @Sean B. @tsynik @tvlz @lancethepants @qrs itd... 
|
| |
|
|
| SEpuLT |
Dodano 04-07-2017 20:43
|
User
Posty: 36
Dołączył: 08/02/2015 21:33
|
Mały problemik. Po raz drugi po wgraniu Twojej wersji (2017.1 miałem to samo) nie odhacza tego automatycznie TomatoAnon. Muszę wyłączyć TomatoAnon i włączyć ponownie. Router R7000. Po za tym wszystko jak na razie śmiga ok.
Netgear R7000 Zawsze najnowsze FreshTomato AIO
|
| |
|
|
| qrs |
Dodano 04-07-2017 23:32
|
Maxi User
Posty: 749
Dołączył: 02/12/2012 00:55
|
tiaaa... na pewno 
---
Netgear R7000 • Netgear WNR3500L v2 • MikroTik hAP ac^2 • TP-LINK M7650
|
| |
|
|
| kille72 |
Dodano 05-07-2017 00:13
|
Administrator
Posty: 2986
Dołączył: 12/02/2007 23:43
|
Haha, poprawiłem 
|
| |
|
|
| qwerty321 |
Dodano 05-07-2017 02:25
|
Super User
Posty: 571
Dołączył: 27/04/2014 18:11
|
blad
Połączony z 05 lipiec 2017 04:03:22:
Miałem kłopot z aktualizacją. Po wgraniu i wyczyszczeniu nvram i z gui i z ssh przestawiłem VLAN-y i zdechł. Pingował się ale nic nie działało. Reset nie pomagał. Przez miniserwer wgrałem ponownie i VLAN-y przestawiłem jako pierwsze tym razem. Niby przeszło ale po przestawieniu IP znowu miał dziwne przypały.
Za trzecim razem działa ale trzeba go było resnąć zasilaniem. Nigdy tak się nie zachowywał.
Połączony z 05 lipiec 2017 04:04:24:
teraz resnę go z gui i wkleję log.
Połączony z 05 lipiec 2017 04:11:09:
N18U długo wstaje. Pojawia się ping ze 20 sztuk, ping znika na 20 sekund gdy na liczniku do końca jest 20 po czym pojawia się gdy licznik od restartu doliczy do zera.
Połączony z 05 lipiec 2017 04:11:41:
Ale router jeszcze nie działa z 1.5 minuty.
Połączony z 05 lipiec 2017 04:13:40:
Adblock rusza dobrze, po złapaniu czasu z ntp i dnscrypcie
Jan 1 01:00:06 rth syslog.info syslogd started: BusyBox v1.25.1
Jan 1 01:00:06 rth kern.notice kernel: klogd started: BusyBox v1.25.1 (2017-07-03 22:34:37 CEST)
Jan 1 01:00:06 rth kern.notice kernel: Linux version 2.6.36.4brcmarm (borys@debian) (gcc version 4.5.3 (Buildroot 2012.02) ) #2 PREEMPT Mon Jul 3 22:55:41 CEST 2017
Jan 1 01:00:06 rth kern.warn kernel: CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7f
Jan 1 01:00:06 rth kern.warn kernel: CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Jan 1 01:00:06 rth kern.warn kernel: Machine: Northstar Prototype
Jan 1 01:00:06 rth kern.warn kernel: Ignoring unrecognised tag 0x00000000
Jan 1 01:00:06 rth kern.info kernel: bootconsole [earlycon0] enabled
Jan 1 01:00:06 rth kern.warn kernel: Memory policy: ECC disabled, Data cache writeback
Jan 1 01:00:06 rth kern.info kernel: MPCORE found at 19020000
Jan 1 01:00:06 rth kern.debug kernel: On node 0 totalpages: 65536
Jan 1 01:00:06 rth kern.debug kernel: DMA zone: 256 pages used for memmap
Jan 1 01:00:06 rth kern.debug kernel: DMA zone: 0 pages reserved
Jan 1 01:00:06 rth kern.debug kernel: DMA zone: 32512 pages, LIFO batch:7
Jan 1 01:00:06 rth kern.debug kernel: Normal zone: 4864 pages used for memmap
Jan 1 01:00:06 rth kern.debug kernel: Normal zone: 27904 pages, LIFO batch:7
Jan 1 01:00:06 rth kern.warn kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60416
Jan 1 01:00:06 rth kern.notice kernel: Kernel command line: root=/dev/mtdblock2 console=ttyS0,115200 init=/sbin/preinit earlyprintk debug
Jan 1 01:00:06 rth kern.info kernel: PID hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 01:00:06 rth kern.info kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 01:00:06 rth kern.info kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 01:00:06 rth kern.info kernel: Memory: 128MB 128MB = 256MB total
Jan 1 01:00:06 rth kern.notice kernel: Memory: 255604k/255604k available, 6540k reserved, 0K highmem
Jan 1 01:00:06 rth kern.notice kernel: Virtual kernel memory layout:
Jan 1 01:00:06 rth kern.notice kernel: vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Jan 1 01:00:06 rth kern.notice kernel: fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
Jan 1 01:00:07 rth kern.notice kernel: DMA : 0xf7e00000 - 0xffe00000 ( 128 MB)
Jan 1 01:00:07 rth kern.notice kernel: vmalloc : 0xd0800000 - 0xf0000000 ( 504 MB)
Jan 1 01:00:07 rth kern.notice kernel: lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
Jan 1 01:00:07 rth kern.notice kernel: modules : 0xbf000000 - 0xc0000000 ( 16 MB)
Jan 1 01:00:07 rth kern.notice kernel: .init : 0xc0008000 - 0xc0037000 ( 188 kB)
Jan 1 01:00:07 rth kern.notice kernel: .text : 0xc0037000 - 0xc03af000 (3552 kB)
Jan 1 01:00:07 rth kern.notice kernel: .data : 0xc03c6000 - 0xc03e7060 ( 133 kB)
Jan 1 01:00:07 rth kern.info kernel: SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan 1 01:00:07 rth kern.info kernel: Preemptable hierarchical RCU implementation.
Jan 1 01:00:07 rth kern.info kernel: RCU-based detection of stalled CPUs is disabled.
Jan 1 01:00:07 rth kern.info kernel: Verbose stalled-CPUs detection is disabled.
Jan 1 01:00:07 rth kern.info kernel: NR_IRQS:256
Jan 1 01:00:07 rth kern.info kernel: MPCORE GIC init
Jan 1 01:00:07 rth kern.warn kernel: External imprecise Data abort at addr=0x0, fsr=0x1c06 ignored.
Jan 1 01:00:07 rth kern.info kernel: MPCORE Global Timer Clock 400000000Hz
Jan 1 01:00:07 rth kern.info kernel: Calibrating delay loop... 1599.07 BogoMIPS (lpj=7995392)
Jan 1 01:00:07 rth kern.info kernel: pid_max: default: 32768 minimum: 301
Jan 1 01:00:07 rth kern.warn kernel: Mount-cache hash table entries: 512
Jan 1 01:00:07 rth kern.info kernel: CPU: Testing write buffer coherency: ok
Jan 1 01:00:07 rth kern.info kernel: L310: cache controller enabled 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x7a130000
Jan 1 01:00:07 rth kern.info kernel: devtmpfs: initialized
Jan 1 01:00:07 rth kern.info kernel: atomic64 test passed
Jan 1 01:00:07 rth kern.info kernel: NET: Registered protocol family 16
Jan 1 01:00:07 rth kern.warn kernel: Found a AMD NAND flash:
Jan 1 01:00:07 rth kern.warn kernel: Total size: 128MB
Jan 1 01:00:07 rth kern.warn kernel: Block size: 128KB
Jan 1 01:00:07 rth kern.warn kernel: Page Size: 2048B
Jan 1 01:00:07 rth kern.warn kernel: OOB Size: 64B
Jan 1 01:00:07 rth kern.warn kernel: Sector size: 512B
Jan 1 01:00:07 rth kern.warn kernel: Spare size: 16B
Jan 1 01:00:07 rth kern.warn kernel: ECC level: 8 (8-bit)
Jan 1 01:00:07 rth kern.warn kernel: Device ID: 0x 1 0xf1 0x80 0x1d 0x 1 0xf1
Jan 1 01:00:07 rth kern.info kernel: CCA UART Clock Config: Sel=1 Ovr=1 Div=48
Jan 1 01:00:07 rth kern.info kernel: CCA UART Clock rate 100000000Hz
Jan 1 01:00:07 rth kern.warn kernel: bio: create slab at 0
Jan 1 01:00:07 rth kern.info kernel: Switching to clocksource mpcore_gtimer
Jan 1 01:00:07 rth kern.info kernel: NET: Registered protocol family 2
Jan 1 01:00:07 rth kern.info kernel: IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan 1 01:00:07 rth kern.info kernel: TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Jan 1 01:00:07 rth kern.info kernel: TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Jan 1 01:00:07 rth kern.info kernel: TCP: Hash tables configured (established 8192 bind 8192)
Jan 1 01:00:07 rth kern.info kernel: TCP reno registered
Jan 1 01:00:07 rth kern.info kernel: UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan 1 01:00:07 rth kern.info kernel: UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jan 1 01:00:07 rth kern.info kernel: NET: Registered protocol family 1
Jan 1 01:00:07 rth kern.debug kernel: PCI: CLS 0 bytes, default 32
Jan 1 01:00:07 rth kern.warn kernel: PCI: no core
Jan 1 01:00:07 rth kern.warn kernel: PCI: no core
Jan 1 01:00:07 rth kern.info kernel: PCI: scanning bus 0
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:00.0: reg 10: [mem 0x18000000-0x18000fff]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000007ff pref]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:01.0: reg 10: [mem 0x18001000-0x18001fff]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:01.0: reg 14: [mem 0x18002000-0x18002fff]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:01.0: reg 30: [mem 0x00000000-0x000007ff pref]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:02.0: reg 10: [mem 0x1802c000-0x1802cfff]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:02.0: reg 30: [mem 0x00000000-0x000007ff pref]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:03.0: reg 10: [mem 0x18024000-0x18024fff]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:03.0: reg 30: [mem 0x00000000-0x000007ff pref]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:04.0: reg 10: [mem 0x18025000-0x18025fff]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:04.0: reg 30: [mem 0x00000000-0x000007ff pref]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:05.0: reg 10: [mem 0x18026000-0x18026fff]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:05.0: reg 30: [mem 0x00000000-0x000007ff pref]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:06.0: reg 10: [mem 0x18027000-0x18027fff]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:06.0: reg 30: [mem 0x00000000-0x000007ff pref]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:07.0: reg 10: [mem 0x18012000-0x18012fff]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:07.0: reg 30: [mem 0x00000000-0x000007ff pref]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:08.0: reg 10: [mem 0x18013000-0x18013fff]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:08.0: reg 30: [mem 0x00000000-0x000007ff pref]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:09.0: reg 10: [mem 0x18014000-0x18014fff]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:09.0: reg 30: [mem 0x00000000-0x000007ff pref]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:0a.0: reg 10: [mem 0x1800b000-0x1800bfff]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:0a.0: reg 14: [mem 0x1800c000-0x1800cfff]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:0a.0: reg 30: [mem 0x00000000-0x000007ff pref]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:0b.0: reg 10: [mem 0x18022000-0x18022fff]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:0b.0: reg 30: [mem 0x00000000-0x000007ff pref]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:0b.1: reg 10: [mem 0x18021000-0x18021fff]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:0b.1: reg 30: [mem 0x00000000-0x000007ff pref]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:0c.0: reg 10: [mem 0x18023000-0x18023fff]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:0c.0: reg 30: [mem 0x00000000-0x000007ff pref]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:0d.0: reg 10: [mem 0x18020000-0x18020fff]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x000007ff pref]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:0e.0: reg 10: [mem 0x18210000-0x1821ffff]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:0e.0: reg 30: [mem 0x00000000-0x000007ff pref]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:0f.0: reg 10: [mem 0x18010000-0x18010fff]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:0f.0: reg 30: [mem 0x00000000-0x000007ff pref]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:10.0: reg 30: [mem 0x00000000-0x000007ff pref]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:11.0: reg 10: [mem 0x18028000-0x18028fff]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:11.0: reg 30: [mem 0x00000000-0x000007ff pref]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:12.0: reg 10: [mem 0x18029000-0x18029fff]
Jan 1 01:00:07 rth kern.debug kernel: pci 0000:00:12.0: reg 30: [mem 0x00000000-0x000007ff pref]
Jan 1 01:00:07 rth kern.warn kernel: PCI: Fixing up bus 0
Jan 1 01:00:07 rth kern.info kernel: PCIE1 link=1
Jan 1 01:00:07 rth kern.info kernel: PCIE1 switching to GEN2
Jan 1 01:00:07 rth kern.info kernel: PCIE1 link=1
Jan 1 01:00:07 rth kern.debug kernel: pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
Jan 1 01:00:07 rth kern.debug kernel: pci 0001:00:00.0: PME# disabled
Jan 1 01:00:07 rth kern.warn kernel: PCI: Fixing up bus 0
Jan 1 01:00:07 rth kern.info kernel: PCI: bus0: Fast back to back transfers disabled
Jan 1 01:00:07 rth kern.debug kernel: pci 0001:01:00.0: reg 10: [mem 0x08000000-0x08007fff 64bit]
Jan 1 01:00:07 rth kern.debug kernel: pci 0001:01:00.0: supports D1 D2
Jan 1 01:00:07 rth kern.warn kernel: PCI: Fixing up bus 1
Jan 1 01:00:07 rth kern.info kernel: PCI: bus1: Fast back to back transfers disabled
Jan 1 01:00:07 rth kern.info kernel: pci 0001:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
Jan 1 01:00:07 rth kern.info kernel: pci 0001:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit]
Jan 1 01:00:07 rth kern.info kernel: pci 0001:01:00.0: BAR 0: set to [mem 0x08000000-0x08007fff 64bit] (PCI address [0x8000000-0x8007fff]
Jan 1 01:00:07 rth kern.info kernel: pci 0001:00:00.0: PCI bridge to [bus 01-01]
Jan 1 01:00:07 rth kern.info kernel: pci 0001:00:00.0: bridge window [io disabled]
Jan 1 01:00:07 rth kern.info kernel: pci 0001:00:00.0: bridge window [mem 0x08000000-0x080fffff]
Jan 1 01:00:07 rth kern.info kernel: pci 0001:00:00.0: bridge window [mem pref disabled]
Jan 1 01:00:07 rth kern.info kernel: PCIE2 link=0
Jan 1 01:00:07 rth kern.info kernel: PCIE3 link=0
Jan 1 01:00:07 rth kern.notice kernel: VFS: Disk quotas dquot_6.5.2
Jan 1 01:00:07 rth kern.warn kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jan 1 01:00:07 rth kern.info kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jan 1 01:00:07 rth kern.info kernel: fuse init (API version 7.15)
Jan 1 01:00:07 rth kern.info kernel: msgmni has been set to 499
Jan 1 01:00:07 rth kern.info kernel: io scheduler noop registered (default)
Jan 1 01:00:07 rth kern.info kernel: io scheduler deadline registered
Jan 1 01:00:07 rth kern.info kernel: io scheduler cfq registered
Jan 1 01:00:07 rth kern.info kernel: Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Jan 1 01:00:07 rth user.debug hotplug[757]: Attached USB device 1-0:1.0 [INTERFACE=9/0/0 PRODUCT=1d6b/3/206]
Jan 1 01:00:07 rth kern.info kernel: serial8250.0: ttyS0 at MMIO 0x18000300 (irq = 117) is a 16550
Jan 1 01:00:07 rth kern.info kernel: console [ttyS0] enabled, bootconsole disabled
Jan 1 01:00:07 rth kern.info kernel: serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
Jan 1 01:00:07 rth kern.info kernel: brd: module loaded
Jan 1 01:00:07 rth kern.info kernel: loop: module loaded
Jan 1 01:00:07 rth kern.err kernel: pflash: found no supported devices
Jan 1 01:00:07 rth kern.err kernel: bcmsflash: found no supported devices
Jan 1 01:00:07 rth kern.warn kernel: Boot partition size = 524288(0x80000)
Jan 1 01:00:07 rth kern.warn kernel: lookup_nflash_rootfs_offset: offset = 0x200000
Jan 1 01:00:07 rth kern.notice kernel: nflash: squash filesystem with lzma found at block 28
Jan 1 01:00:07 rth kern.notice kernel: Creating 4 MTD partitions on "nflash":
Jan 1 01:00:07 rth kern.notice kernel: 0x000000000000-0x000000080000 : "boot"
Jan 1 01:00:07 rth kern.notice kernel: 0x000000080000-0x000000200000 : "nvram"
Jan 1 01:00:07 rth kern.notice kernel: 0x000000200000-0x000002000000 : "linux"
Jan 1 01:00:07 rth kern.notice kernel: 0x00000039a890-0x000002000000 : "rootfs"
Jan 1 01:00:07 rth kern.info kernel: PPP generic driver version 2.4.2
Jan 1 01:00:08 rth user.debug hotplug[768]: Attached USB device 2-0:1.0 [INTERFACE=9/0/0 PRODUCT=1d6b/2/206]
Jan 1 01:00:08 rth kern.info kernel: PPP MPPE Compression module registered
Jan 1 01:00:08 rth kern.info kernel: NET: Registered protocol family 24
Jan 1 01:00:08 rth kern.info kernel: PPTP driver version 0.8.5
Jan 1 01:00:08 rth kern.warn kernel: === PPTP init ===
Jan 1 01:00:08 rth kern.info kernel: Mirror/redirect action on
Jan 1 01:00:08 rth kern.info kernel: u32 classifier
Jan 1 01:00:08 rth kern.info kernel: Actions configured
Jan 1 01:00:08 rth kern.info kernel: Netfilter messages via NETLINK v0.30.
Jan 1 01:00:08 rth kern.info kernel: nf_conntrack version 0.5.0 (3993 buckets, 15972 max)
Jan 1 01:00:08 rth kern.info kernel: xt_time: kernel timezone is -0000
Jan 1 01:00:08 rth kern.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 01:00:08 rth kern.info kernel: TCP cubic registered
Jan 1 01:00:08 rth kern.info kernel: NET: Registered protocol family 10
Jan 1 01:00:08 rth kern.info kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 01:00:08 rth kern.info kernel: NET: Registered protocol family 17
Jan 1 01:00:08 rth kern.info kernel: L2TP core driver, V2.0
Jan 1 01:00:08 rth kern.info kernel: PPPoL2TP kernel driver, V2.0
Jan 1 01:00:08 rth kern.info kernel: 802.1Q VLAN Support v1.8 Ben Greear
Jan 1 01:00:08 rth kern.info kernel: All bugs added by David S. Miller
Jan 1 01:00:08 rth kern.notice kernel: Registering the dns_resolver key type
Jan 1 01:00:08 rth kern.info kernel: Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
Jan 1 01:00:08 rth kern.info kernel: NAND device: Manufacturer ID: 0x01, Chip ID: 0xf1 (AMD NAND 128MiB 3,3V 8-bit)
Jan 1 01:00:08 rth kern.warn kernel: Spare area=64 eccbytes 56, ecc bytes located at:
Jan 1 01:00:08 rth kern.warn kernel: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Jan 1 01:00:08 rth kern.warn kernel: Available 7 bytes at (off,len):
Jan 1 01:00:08 rth kern.warn kernel: (1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0)
Jan 1 01:00:08 rth kern.info kernel: Scanning device for bad blocks
Jan 1 01:00:08 rth kern.warn kernel: Options: NO_AUTOINCR,NO_READRDY,BBT_SCAN2NDPAGE,
Jan 1 01:00:08 rth kern.notice kernel: Creating 2 MTD partitions on "brcmnand":
Jan 1 01:00:08 rth kern.notice kernel: 0x000002000000-0x000008000000 : "brcmnand"
Jan 1 01:00:08 rth kern.notice kernel: 0x000004000000-0x000008000000 : "jffs2"
Jan 1 01:00:08 rth kern.warn kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Jan 1 01:00:08 rth kern.info kernel: devtmpfs: mounted
Jan 1 01:00:08 rth kern.info kernel: Freeing init memory: 188K
Jan 1 01:00:08 rth kern.warn kernel: emf: module license 'Proprietary' taints kernel.
Jan 1 01:00:08 rth kern.warn kernel: Disabling lock debugging due to kernel taint
Jan 1 01:00:08 rth kern.warn kernel: et_module_init: passivemode set to 0x0
Jan 1 01:00:08 rth kern.warn kernel: et_module_init: txworkq set to 0x0
Jan 1 01:00:08 rth kern.warn kernel: et_module_init: et_txq_thresh set to 0x0
Jan 1 01:00:08 rth kern.warn kernel: eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.86 (r456083)
Jan 1 01:00:08 rth kern.warn kernel: wl_module_init: passivemode set to 0x0
Jan 1 01:00:08 rth kern.warn kernel: wl_module_init: txworkq set to 0x0
Jan 1 01:00:08 rth kern.warn kernel: eth1: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.73 (r448163)
Jan 1 01:00:08 rth kern.info kernel: usbcore: registered new interface driver usbfs
Jan 1 01:00:08 rth kern.info kernel: usbcore: registered new interface driver hub
Jan 1 01:00:08 rth kern.info kernel: usbcore: registered new device driver usb
Jan 1 01:00:08 rth kern.notice kernel: SCSI subsystem initialized
Jan 1 01:00:08 rth kern.warn kernel: csw_retry 100
Jan 1 01:00:08 rth kern.info kernel: Initializing USB Mass Storage driver...
Jan 1 01:00:08 rth kern.info kernel: usbcore: registered new interface driver usb-storage
Jan 1 01:00:08 rth kern.info kernel: USB Mass Storage support registered.
Jan 1 01:00:08 rth kern.info kernel: xhci_hcd 0000:00:0c.0: xHCI Host Controller
Jan 1 01:00:08 rth kern.info kernel: xhci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 1
Jan 1 01:00:08 rth kern.info kernel: xhci_hcd 0000:00:0c.0: irq 112, io mem 0x18023000
Jan 1 01:00:08 rth kern.err kernel: xhci_hcd 0000:00:0c.0: Failed to enable MSI-X
Jan 1 01:00:08 rth kern.err kernel: xhci_hcd 0000:00:0c.0: failed to allocate MSI entry
Jan 1 01:00:08 rth kern.warn kernel: usb usb1: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
Jan 1 01:00:08 rth kern.debug kernel: xHCI xhci_add_endpoint called for root hub
Jan 1 01:00:08 rth kern.debug kernel: xHCI xhci_check_bandwidth called for root hub
Jan 1 01:00:08 rth kern.info kernel: hub 1-0:1.0: USB hub found
Jan 1 01:00:08 rth kern.info kernel: hub 1-0:1.0: 1 port detected
Jan 1 01:00:08 rth kern.info kernel: [xhci-hub] usb2mode:[0]
Jan 1 01:00:08 rth kern.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 01:00:08 rth kern.info kernel: ehci_hcd 0000:00:0b.1: EHCI Host Controller
Jan 1 01:00:08 rth kern.info kernel: ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
Jan 1 01:00:08 rth kern.info kernel: ehci_hcd 0000:00:0b.1: irq 111, io mem 0x18021000
Jan 1 01:00:08 rth kern.info kernel: ehci_hcd 0000:00:0b.1: USB 0.0 started, EHCI 1.00
Jan 1 01:00:08 rth kern.info kernel: hub 2-0:1.0: USB hub found
Jan 1 01:00:08 rth kern.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 01:00:08 rth kern.err kernel: hub 2-0:1.0: unable to enumerate USB device on port 1
Jan 1 01:00:08 rth kern.info kernel: usb 1-1: new SuperSpeed USB device using xhci_hcd and address 2
Jan 1 01:00:08 rth kern.warn kernel: xhci_hcd 0000:00:0c.0: WARN: short transfer on control ep
Jan 1 01:00:08 rth kern.warn kernel: xhci_hcd 0000:00:0c.0: WARN: short transfer on control ep
Jan 1 01:00:08 rth kern.warn kernel: xhci_hcd 0000:00:0c.0: WARN: short transfer on control ep
Jan 1 01:00:08 rth kern.warn kernel: xhci_hcd 0000:00:0c.0: WARN: short transfer on control ep
Jan 1 01:00:08 rth kern.warn kernel: xhci_hcd 0000:00:0c.0: disable burst on ep 1
Jan 1 01:00:08 rth kern.warn kernel: xhci_hcd 0000:00:0c.0: WARN no SS endpoint bMaxBurst
Jan 1 01:00:08 rth kern.warn kernel: xhci_hcd 0000:00:0c.0: disable burst on ep 2
Jan 1 01:00:08 rth kern.warn kernel: xhci_hcd 0000:00:0c.0: WARN no SS endpoint bMaxBurst
Jan 1 01:00:08 rth kern.info kernel: scsi0 : usb-storage 1-1:1.0
Jan 1 01:00:08 rth user.debug hotplug[780]: Attached USB device 1-1:1.0 [INTERFACE=8/6/80 PRODUCT=13fe/5500/100]
Jan 1 01:00:09 rth kern.info kernel: device vlan4 entered promiscuous mode
Jan 1 01:00:09 rth kern.info kernel: device eth0 entered promiscuous mode
Jan 1 01:00:09 rth kern.notice kernel: scsi 0:0:0:0: Direct-Access USB DISK 3.0 PMAP PQ: 0 ANSI: 6
Jan 1 01:00:09 rth kern.info kernel: device eth1 entered promiscuous mode
Jan 1 01:00:09 rth kern.info kernel: br0: port 2(eth1) entering forwarding state
Jan 1 01:00:09 rth kern.info kernel: br0: port 2(eth1) entering forwarding state
Jan 1 01:00:09 rth kern.info kernel: br0: port 1(vlan4) entering forwarding state
Jan 1 01:00:09 rth kern.info kernel: br0: port 1(vlan4) entering forwarding state
Jan 1 01:00:10 rth authpriv.info dropbear[836]: Running in background
Jan 1 01:00:10 rth user.emerg preinit[1]: OUT checkConnect, wan is disconnected
Jan 1 01:00:10 rth daemon.info dnsmasq[845]: started, version 2.77 cachesize 4096
Jan 1 01:00:10 rth daemon.info dnsmasq[845]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset Tomato-helper auth DNSSEC loop-detect inotify
Jan 1 01:00:10 rth daemon.info dnsmasq[845]: DNSSEC validation enabled
Jan 1 01:00:10 rth daemon.info dnsmasq[845]: DNSSEC signature timestamps not checked until first cache reload
Jan 1 01:00:10 rth daemon.info dnsmasq[845]: asynchronous logging enabled, queue limit is 5 messages
Jan 1 01:00:10 rth daemon.info dnsmasq-dhcp[845]: DHCP, IP range 10.0.5.210 -- 10.0.5.254, lease time 1d
Jan 1 01:00:10 rth daemon.info dnsmasq[845]: using nameserver 127.0.0.1#40
Jan 1 01:00:10 rth daemon.info dnsmasq[845]: read /etc/hosts - 2 addresses
Jan 1 01:00:10 rth daemon.info dnsmasq[845]: read /etc/dnsmasq/hosts/hosts - 5 addresses
Jan 1 01:00:10 rth daemon.info dnsmasq-dhcp[845]: read /etc/dnsmasq/dhcp/dhcp-hosts
Jan 1 01:00:10 rth kern.notice kernel: sd 0:0:0:0: [sda] 30283008 512-byte logical blocks: (15.5 GB/14.4 GiB)
Jan 1 01:00:10 rth kern.notice kernel: sd 0:0:0:0: [sda] Write Protect is off
Jan 1 01:00:10 rth kern.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
Jan 1 01:00:10 rth kern.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan 1 01:00:10 rth kern.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan 1 01:00:10 rth kern.info kernel: sda: sda1
Jan 1 01:00:10 rth kern.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan 1 01:00:10 rth kern.notice kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk
Jan 1 01:00:18 rth kern.info kernel: EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
Jan 1 01:00:55 rth daemon.notice dnscrypt-proxy[988]: Starting dnscrypt-proxy 1.9.5
Jan 1 01:00:55 rth daemon.info dnscrypt-proxy[988]: Generating a new session key pair
Jan 1 01:00:55 rth daemon.info dnscrypt-proxy[988]: Done
Jan 1 01:00:56 rth daemon.notice dnscrypt-proxy[990]: Starting dnscrypt-proxy 1.9.5
Jan 1 01:00:56 rth daemon.info dnscrypt-proxy[990]: Generating a new session key pair
Jan 1 01:00:56 rth daemon.info dnscrypt-proxy[990]: Done
Jan 1 01:00:56 rth user.info preinit[1]: NGinX - daemon not enabled cancelled generation of config file
Jan 1 01:00:56 rth user.debug preinit[1]: starting rstats.
Jan 1 01:00:56 rth user.debug preinit[1]: starting cstats.
Jan 1 01:00:56 rth kern.warn kernel: gro disabled
Jan 1 01:00:58 rth user.notice root: MySQL successfully stopped
Jan 1 01:00:58 rth user.notice root: Terminating transmission-daemon...
Jan 1 01:00:59 rth user.info preinit[1]: MultiWAN: MWAN is 1 (max 4).
Jan 1 01:00:59 rth user.notice root: Stopping NFS Server ...
Jan 1 01:00:59 rth user.notice root: Transmission daemon successfully stopped.
Jan 1 01:00:59 rth user.notice root: NFS Server stopped ...
Jan 1 01:00:59 rth daemon.info pppd[1037]: Plugin rp-pppoe.so loaded.
Jan 1 01:00:59 rth daemon.info pppd[1037]: RP-PPPoE plugin version 3.10 compiled against pppd 2.4.5
Jan 1 01:00:59 rth daemon.notice pppd[1077]: pppd 2.4.5 started by root, uid 0
Jan 1 01:00:59 rth daemon.info pppd[1077]: PPP session is 48 (0x30)
Jan 1 01:00:59 rth daemon.warn pppd[1077]: Connected to 4c:5e:0c:0e:98:74 via interface vlan10
Jan 1 01:00:59 rth daemon.info pppd[1077]: Using interface ppp0
Jan 1 01:00:59 rth daemon.notice pppd[1077]: Connect: ppp0 <--> vlan10
Jan 1 01:01:00 rth daemon.notice pppd[1077]: CHAP authentication succeeded
Jan 1 01:01:00 rth daemon.notice pppd[1077]: peer from calling number 4C:5E:0C:0E:98:74 authorized
Jan 1 01:01:00 rth daemon.notice pppd[1077]: local IP address 91.232.50.130
Jan 1 01:01:00 rth daemon.notice pppd[1077]: remote IP address 10.0.14.46
Jan 1 01:01:00 rth daemon.notice pppd[1077]: primary DNS address 91.232.50.10
Jan 1 01:01:00 rth daemon.notice pppd[1077]: secondary DNS address 91.232.52.10
Jan 1 01:01:00 rth daemon.warn dnsmasq[845]: failed to access /etc/resolv.dnsmasq: No such file or directory
Jan 1 01:01:00 rth user.debug ip-up[1084]: 255: pptp peerdns disabled
Jan 1 01:01:00 rth daemon.info dnsmasq[845]: reading /etc/resolv.dnsmasq
Jan 1 01:01:00 rth daemon.info dnsmasq[845]: using nameserver 127.0.0.1#40
Jan 1 01:01:00 rth daemon.info dnsmasq[845]: using nameserver 91.232.50.10#53
Jan 1 01:01:00 rth daemon.info dnsmasq[845]: using nameserver 91.232.52.10#53
Jan 1 01:01:00 rth kern.info kernel: Ebtables v2.0 registered
Jan 1 01:01:00 rth kern.info kernel: device eth1 left promiscuous mode
Jan 1 01:01:00 rth kern.info kernel: br0: port 2(eth1) entering forwarding state
Jan 1 01:01:00 rth kern.info kernel: device eth1 entered promiscuous mode
Jan 1 01:01:00 rth kern.info kernel: br0: port 2(eth1) entering forwarding state
Jan 1 01:01:00 rth kern.info kernel: br0: port 2(eth1) entering forwarding state
Jan 1 01:01:01 rth kern.info kernel: ipt_account 0.1.21 : Piotr Gasidlo , http://code.google.com/p/ipt-account/
Jan 1 01:01:02 rth user.info preinit[1]: Asus RT-N18U: Tomato 1.28.0000 -2017.2b58-kille72- K26ARM USB AIO-64K
Jan 1 01:01:02 rth user.debug preinit[1]: 255: pptp peerdns disabled
Jan 1 01:01:02 rth daemon.info dnsmasq[845]: reading /etc/resolv.dnsmasq
Jan 1 01:01:02 rth daemon.info dnsmasq[845]: using nameserver 127.0.0.1#40
Jan 1 01:01:02 rth daemon.info dnsmasq[845]: using nameserver 91.232.50.10#53
Jan 1 01:01:02 rth daemon.info dnsmasq[845]: using nameserver 91.232.52.10#53
Jan 1 01:01:02 rth daemon.info dnsmasq[845]: exiting on receipt of SIGTERM
Jan 1 01:01:02 rth daemon.notice dnscrypt-proxy[988]: Stopping proxy
Jan 1 01:01:02 rth daemon.info dnscrypt-proxy[988]: TCP listener shut down
Jan 1 01:01:02 rth daemon.info dnsmasq[1174]: started, version 2.77 cachesize 4096
Jan 1 01:01:02 rth daemon.info dnsmasq[1174]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset Tomato-helper auth DNSSEC loop-detect inotify
Jan 1 01:01:02 rth daemon.info dnsmasq[1174]: DNSSEC validation enabled
Jan 1 01:01:02 rth daemon.info dnsmasq[1174]: DNSSEC signature timestamps not checked until first cache reload
Jan 1 01:01:02 rth daemon.info dnsmasq[1174]: asynchronous logging enabled, queue limit is 5 messages
Jan 1 01:01:02 rth daemon.info dnsmasq-dhcp[1174]: DHCP, IP range 10.0.5.210 -- 10.0.5.254, lease time 1d
Jan 1 01:01:02 rth daemon.info dnsmasq[1174]: using nameserver 127.0.0.1#40
Jan 1 01:01:02 rth daemon.info dnsmasq[1174]: reading /etc/resolv.dnsmasq
Jan 1 01:01:02 rth daemon.info dnsmasq[1174]: using nameserver 127.0.0.1#40
Jan 1 01:01:02 rth daemon.info dnsmasq[1174]: using nameserver 91.232.50.10#53
Jan 1 01:01:02 rth daemon.info dnsmasq[1174]: using nameserver 91.232.52.10#53
Jan 1 01:01:02 rth daemon.info dnsmasq[1174]: read /etc/hosts - 2 addresses
Jan 1 01:01:02 rth daemon.info dnsmasq[1174]: read /etc/dnsmasq/hosts/hosts - 5 addresses
Jan 1 01:01:02 rth daemon.info dnsmasq-dhcp[1174]: read /etc/dnsmasq/dhcp/dhcp-hosts
Jan 1 01:01:27 rth daemon.notice dnscrypt-proxy[1331]: Starting dnscrypt-proxy 1.9.5
Jan 1 01:01:27 rth daemon.info dnscrypt-proxy[1331]: Generating a new session key pair
Jan 1 01:01:27 rth daemon.info dnscrypt-proxy[1331]: Done
Jan 1 01:01:27 rth daemon.notice dnscrypt-proxy[1333]: Starting dnscrypt-proxy 1.9.5
Jan 1 01:01:27 rth daemon.info dnscrypt-proxy[1333]: Generating a new session key pair
Jan 1 01:01:27 rth daemon.info dnscrypt-proxy[1333]: Done
Jan 1 01:01:27 rth daemon.info dnscrypt-proxy[1331]: Server certificate with serial #1490391488 received
Jan 1 01:01:27 rth daemon.info dnscrypt-proxy[1331]: This certificate has not been activated yet
Jan 1 01:01:27 rth daemon.err dnscrypt-proxy[1331]: No useable certificates found
Jul 5 04:09:02 rth daemon.info dnsmasq[1174]: now checking DNSSEC signature timestamps
Jul 5 04:09:02 rth daemon.info dnsmasq[1174]: read /etc/hosts - 14 addresses
Jul 5 04:09:02 rth daemon.info dnsmasq[1174]: read /etc/dnsmasq/hosts/hosts - 5 addresses
Jul 5 04:09:02 rth daemon.info dnsmasq-dhcp[1174]: read /etc/dnsmasq/dhcp/dhcp-hosts
Jul 5 03:09:02 rth daemon.info dnscrypt-proxy[1331]: Refetching server certificates
Jul 5 03:09:02 rth daemon.info dnscrypt-proxy[1331]: Server certificate with serial #1490391488 received
Jul 5 03:09:02 rth daemon.info dnscrypt-proxy[1331]: This certificate is valid
Jul 5 03:09:02 rth daemon.info dnscrypt-proxy[1331]: Chosen certificate #1490391488 is valid from [2017-03-24] to [2018-03-24]
Jul 5 03:09:02 rth daemon.info dnscrypt-proxy[1331]: The key rotation period for this server may exceed the recommended value. This is bad for forward secrecy.
Jul 5 03:09:02 rth daemon.info dnscrypt-proxy[1331]: Server key fingerprint is E7F8:4477:BF89:1434:1ECE:23F0:D6A6:6EB9:4F45:3167:D71F:80BB:4E80:A04F:F180:F778
Jul 5 03:09:02 rth daemon.notice dnscrypt-proxy[1331]: Proxying from 127.0.0.1:40 to 208.67.220.220:443
Jul 5 04:09:04 rth daemon.info pppd[1077]: System time change detected.
Jul 5 04:09:05 rth user.info adblock: prepare to download ...
Jul 5 04:09:05 rth user.info adblock: [1] downloading blacklist - http://winhelp2002.mvps.org/hosts.txt
Jul 5 04:09:07 rth user.info adblock: ... [1] found 14902 entries
Jul 5 04:09:07 rth user.info adblock: [2] downloading blacklist - http://adaway.org/hosts.txt
Jul 5 04:09:08 rth user.info adblock: ... [2] found 525 entries
Jul 5 04:09:08 rth user.info adblock: [3] downloading blacklist - http://hosts-file.net/ad_servers.txt
Jul 5 04:09:20 rth user.info adblock: ... [3] found 48026 entries
Jul 5 04:09:20 rth user.info adblock: [4] downloading blacklist - http://www.malwaredomainlist.com/hostslist/hosts.txt
Jul 5 04:09:20 rth user.info adblock: ... [4] found 1158 entries
Jul 5 04:09:20 rth user.info adblock: [5] downloading blacklist - http://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintext
Jul 5 04:09:21 rth user.info adblock: ... [5] found 2342 entries
Jul 5 04:09:21 rth user.info adblock: [6] downloading blacklist - http://someonewhocares.org/hosts/zero/hosts
Jul 5 04:09:23 rth user.info adblock: ... [6] found 13144 entries
Jul 5 04:09:23 rth user.info adblock: [7] downloading blacklist - https://raw.githubusercontent.com/WindowsLies/BlockWindows/master/hosts
Jul 5 04:09:24 rth user.info adblock: ... [7] found 109 entries
Jul 5 04:09:24 rth user.info adblock: [8] downloading blacklist - http://sysctl.org/cameleon/hosts
Jul 5 04:09:26 rth user.info adblock: ... [8] found 21273 entries
Jul 5 04:09:26 rth user.info adblock: [9] downloading blacklist - http://adblock.gjtech.net/?format=hostfile
Jul 5 04:09:26 rth user.info adblock: ... [9] download error! Please check URL
Jul 5 04:09:26 rth user.info adblock: [10] downloading blacklist - http://hostsfile.mine.nu/Hosts
Jul 5 04:09:34 rth cron.err crond[997]: time disparity of 24987008 minutes detected
Jul 5 04:09:35 rth user.info adblock: ... [10] found 94960 entries
Jul 5 04:09:35 rth user.info adblock: [11] downloading blacklist - https://raw.github.com/notracking/hosts-blocklists/master/hostnames.txt
Jul 5 04:09:37 rth user.info adblock: ... [11] found 33190 entries
Jul 5 04:10:00 rth user.info adblock: activated - 170415 entries
Jul 5 04:10:01 rth user.info adblock: add cron job
Jul 5 04:10:01 rth daemon.info dnsmasq[1174]: exiting on receipt of SIGTERM
Jul 5 03:10:01 rth daemon.notice dnscrypt-proxy[1331]: Stopping proxy
Jul 5 03:10:01 rth daemon.info dnscrypt-proxy[1331]: UDP listener shut down
Jul 5 03:10:01 rth daemon.info dnscrypt-proxy[1331]: TCP listener shut down
Jul 5 04:10:01 rth user.debug preinit[1]: 255: pptp peerdns disabled
Jul 5 04:10:02 rth daemon.info dnsmasq[2215]: started, version 2.77 cachesize 4096
Jul 5 04:10:02 rth daemon.info dnsmasq[2215]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset Tomato-helper auth DNSSEC loop-detect inotify
Jul 5 04:10:02 rth daemon.info dnsmasq[2215]: DNSSEC validation enabled
Jul 5 04:10:02 rth daemon.info dnsmasq[2215]: DNSSEC signature timestamps not checked until first cache reload
Jul 5 04:10:02 rth daemon.info dnsmasq[2215]: asynchronous logging enabled, queue limit is 5 messages
Jul 5 04:10:02 rth daemon.info dnsmasq-dhcp[2215]: DHCP, IP range 10.0.5.210 -- 10.0.5.254, lease time 1d
Jul 5 04:10:02 rth daemon.info dnsmasq[2215]: using nameserver 127.0.0.1#40
Jul 5 04:10:03 rth daemon.info dnsmasq[2215]: reading /etc/resolv.dnsmasq
Jul 5 04:10:03 rth daemon.notice dnscrypt-proxy[2235]: Starting dnscrypt-proxy 1.9.5
Jul 5 04:10:03 rth daemon.info dnscrypt-proxy[2235]: Generating a new session key pair
Jul 5 04:10:03 rth daemon.info dnscrypt-proxy[2235]: Done
Jul 5 04:10:03 rth daemon.info dnsmasq[2215]: using nameserver 127.0.0.1#40
Jul 5 04:10:03 rth daemon.info dnsmasq[2215]: using nameserver 91.232.50.10#53
Jul 5 04:10:03 rth daemon.info dnsmasq[2215]: using nameserver 91.232.52.10#53
Jul 5 04:10:03 rth daemon.notice dnscrypt-proxy[2237]: Starting dnscrypt-proxy 1.9.5
Jul 5 04:10:03 rth daemon.info dnscrypt-proxy[2237]: Generating a new session key pair
Jul 5 04:10:03 rth daemon.info dnscrypt-proxy[2235]: Server certificate with serial #1490391488 received
Jul 5 04:10:03 rth daemon.info dnscrypt-proxy[2235]: This certificate is valid
Jul 5 04:10:03 rth daemon.info dnscrypt-proxy[2237]: Done
Jul 5 04:10:03 rth daemon.info dnscrypt-proxy[2235]: Chosen certificate #1490391488 is valid from [2017-03-24] to [2018-03-24]
Jul 5 04:10:03 rth daemon.info dnscrypt-proxy[2235]: The key rotation period for this server may exceed the recommended value. This is bad for forward secrecy.
Jul 5 04:10:03 rth daemon.info dnscrypt-proxy[2235]: Server key fingerprint is E7F8:4477:BF89:1434:1ECE:23F0:D6A6:6EB9:4F45:3167:D71F:80BB:4E80:A04F:F180:F778
Jul 5 04:10:03 rth daemon.notice dnscrypt-proxy[2235]: Proxying from 127.0.0.1:40 to 208.67.220.220:443
Jul 5 04:10:03 rth daemon.info dnsmasq[2215]: read /etc/hosts - 14 addresses
Jul 5 04:10:03 rth daemon.info dnsmasq[2215]: read /etc/dnsmasq/hosts/hosts - 5 addresses
Jul 5 04:10:03 rth daemon.info dnsmasq-dhcp[2215]: read /etc/dnsmasq/dhcp/dhcp-hosts
Jul 5 04:10:03 rth daemon.info dnsmasq[2215]: now checking DNSSEC signature timestamps
Jul 5 04:10:03 rth daemon.info dnsmasq[2215]: read /etc/hosts - 14 addresses
Jul 5 04:10:03 rth daemon.info dnsmasq[2215]: read /etc/dnsmasq/hosts/hosts - 5 addresses
Jul 5 04:10:03 rth daemon.info dnsmasq-dhcp[2215]: read /etc/dnsmasq/dhcp/dhcp-hosts
Połączony z 05 lipiec 2017 04:14:51:
Nie wiem skąd te przypały przy aktualizacji. Czyściłem thorough i poźniej przez ssh i zakomitowane.
Połączony z 05 lipiec 2017 04:34:10:
Rebootnąłem go kilka razy i adblocka uruchamia dobrze. Dziwny jest długi boot. ze 2 minuty po upłynięciu timera. No i nie wiem co za przypał mnie dopadł z aktualizacją i zapisywaniem VLAN-ów, że router zdychał.
Połączony z 05 lipiec 2017 04:35:40:
Mam tu jeszcze z kilka routerów różnych to sprawdzę i na nich. Jeszcze nie badałem VPN-ów.
Połączony z 05 lipiec 2017 04:40:01:
działa dobrze... zobaczymy po dobie czy się nie zawiesi.
Edytowany przez qwerty321 dnia 05-07-2017 04:40
|
| |
|
|
| kille72 |
Dodano 05-07-2017 08:37
|
Administrator
Posty: 2986
Dołączył: 12/02/2007 23:43
|
Testujcie tez nowa Sambe i SMB2
|
| |
|
|
| djwujek |
Dodano 05-07-2017 10:11
|
Maxi User
Posty: 861
Dołączył: 29/07/2011 00:09
|
Poprosimy change log ze zmianami bo na stronie nie ma
---- SIEĆ 1 -----
1.Modem Vectra 600/60 Mbps
2. Edgerouter X - Dom
3. Edgerouter X - Goście
4. Edgeswitch 24 Lite
5. Asus RT-N 12 d1 DD WRT 43012 - Goście
6. Nas QNAP TS-228A + 1 x 4TB
6. UPS 510W
------ SIEĆ 2 -------
1.Modem Livebox 3.0
|
| |
|
|
| kille72 |
Dodano 05-07-2017 10:30
|
Administrator
Posty: 2986
Dołączył: 12/02/2007 23:43
|
|
| |
|
|
| qwerty321 |
Dodano 05-07-2017 13:22
|
Super User
Posty: 571
Dołączył: 27/04/2014 18:11
|
A jak to przełączyć?
Używam Samba File Sharing od nocy, bo mam tam pendrive'a i jeden z katalogów w /opt/costam.. jest dla samby. Ale czy to jest smb2 czy 1 nie mam pojęcia.
Połączony z 05 lipiec 2017 13:25:33:
A w logach od nocy, od aktualizacji jest czysto. Nie wiem jak sambę v2 testować.
Połączony z 05 lipiec 2017 13:26:44:
I zwisu routera nie było. Działa ok. Były przypały przy aktualizacji i zapisie VLAN-ów. Kilka razy musiałem robić recovery routera.
Edytowany przez qwerty321 dnia 05-07-2017 13:26
|
| |
|
|
| kille72 |
Dodano 05-07-2017 14:18
|
Administrator
Posty: 2986
Dołączył: 12/02/2007 23:43
|
Jak masz Windows to on sam wybiera najwyższy protokół, czyli SMB2 a nie SMB1. W Power Shell wpisz "Get-SmbConnection" i zobaczysz jakim "dialektem" klient gada z serwerem
|
| |
|
|
| qwerty321 |
Dodano 05-07-2017 19:20
|
Super User
Posty: 571
Dołączył: 27/04/2014 18:11
|
power shell nie zwraca nic
przechodzi do kolejnej linijki i wyświetla prompta.
Windows PowerShell
Copyright (C) 2016 Microsoft Corporation. All rights reserved.
PS C:\WINDOWS\system32> cd /
PS C:\>
PS C:\>
PS C:\> Get-SmbConnection
PS C:\>
Połączony z 05 lipiec 2017 19:34:35:
Ale wireshark pokazuje SMB2
Frame 352: 322 bytes on wire (2576 bits), 322 bytes captured (2576 bits) on interface 0
Ethernet II, Src: Micro-St_8e:c6:ad (44:8a:5b:8e:c6:ad), Dst: AsustekC_b1:cc:7c (38:d5:47:b1:cc:7c)
Internet Protocol Version 4, Src: 10.9.65.25, Dst: 10.9.65.1
Transmission Control Protocol, Src Port: 59213, Dst Port: 445, Seq: 13356, Ack: 33745, Len: 268
NetBIOS Session Service
SMB2 (Server Message Block Protocol version 2)
SMB2 Header
Create Request (0x05)
SMB2 (Server Message Block Protocol version 2)
Połączony z 05 lipiec 2017 19:42:30:
Wnioski:
Komputer -> router transfer ok 20MB/s
Router - > Komputer zacina się, staje, Transfer słaby kilobajty/s
Połączony z 05 lipiec 2017 19:45:05:
zdjęcie
Połączony z 05 lipiec 2017 19:46:43:
Kopiowałem jeden plik filmiku około 160MB wielkości.
Połączony z 05 lipiec 2017 19:51:12:
a to komputer-> roiter dobry transfer
Połączony z 05 lipiec 2017 19:52:17:
Coś się źle wkleiło ale ten wolniejszy to router->komputer
qwerty321 załączono następujące plik:
Nie masz uprawnień, by zobaczyć załączniki w tym wątku.
Edytowany przez qwerty321 dnia 05-07-2017 19:52
|
| |
|
|
| RaTaJ |
Dodano 06-07-2017 16:26
|
User
Posty: 163
Dołączył: 03/07/2011 14:12
|
wyłącz QoS i lub Bandwich Limiter
|
| |
|
|
| qwerty321 |
Dodano 06-07-2017 18:22
|
Super User
Posty: 571
Dołączył: 27/04/2014 18:11
|
Nie mam ani jednego ani drugiego włączonego.
Przy zapisie też czasem stanie. Robiłem próby na 1+ gigowych plikach. Między komputerami to nie występuje. Wszystki komputery mam na kablach.
|
| |
|
|
| qrs |
Dodano 06-07-2017 20:36
|
Maxi User
Posty: 749
Dołączył: 02/12/2012 00:55
|
mam
Cytat Tomato v1.28.0000 -2017.2b58-kille72- K26ARM USB AIO-64K
i u mnie jest wszystko OK
---
Netgear R7000 • Netgear WNR3500L v2 • MikroTik hAP ac^2 • TP-LINK M7650
|
| |
|
|
| kille72 |
Dodano 06-07-2017 21:14
|
Administrator
Posty: 2986
Dołączył: 12/02/2007 23:43
|
Cytat qwerty321 napisał(a):
Nie mam ani jednego ani drugiego włączonego.
Przy zapisie też czasem stanie. Robiłem próby na 1+ gigowych plikach. Między komputerami to nie występuje. Wszystki komputery mam na kablach.
Masz pendrive czy HDD?
|
| |
|
|
| qwerty321 |
Dodano 07-07-2017 12:47
|
Super User
Posty: 571
Dołączył: 27/04/2014 18:11
|
Pendrive ale nie mam dysku na USB żeby sprawdzić, bo musiałem ostatni użyć i teraz nie mam. Ale na tym pendrivie poprzednie wersje się nie zacinały.
Komputery mam stacjonarne, mocne maszyny do pracy i na kablach.
|
| |
|
|
| kille72 |
Dodano 07-07-2017 23:59
|
Administrator
Posty: 2986
Dołączył: 12/02/2007 23:43
|
|
| |
|
' target='_blank'>Link
