|
[MOD] Tomato by shibby
|
| lukas013 |
Dodano 23-03-2015 19:33
|
User
Posty: 35
Dołączył: 08/10/2006 10:22
|
Nie ma bo jest jakiś bug z logowaniem się poprzez www.
Shibby pisał że "nie generuje się certyfikat" i usunął obrazy z serwera. Musimy czekać na poprawkę od mistrza  .
|
| |
|
|
| kille72 |
Dodano 23-03-2015 19:42
|
Administrator
Posty: 2986
Dołączył: 12/02/2007 23:43
|
|
| |
|
|
| qrs |
Dodano 23-03-2015 20:46
|
Maxi User
Posty: 749
Dołączył: 02/12/2012 00:55
|
---
Netgear R7000 • Netgear WNR3500L v2 • MikroTik hAP ac^2 • TP-LINK M7650
|
| |
|
|
| Steel_Rat |
Dodano 23-03-2015 22:54
|
OL Maniac
Posty: 1831
Dołączył: 29/05/2011 22:24
|
@shibby jest ciekawy błąd (albo i nie zależy jak na to patrzeć) w menagerze do MySQL. Można się do niego dostać i z wewnątrz i z zewnątrz. Można nawet zalogować się z zwenątrz na root. Wystarczy że ktoś wpisze "http:// /adminer.php" i może się logować, włamywać itp.
Jest jakiś sposób by logowanie było ukryte na zewnątrz.
Edytowany przez Steel_Rat dnia 23-03-2015 23:04
WRT3200ACN (WRT32X) + OpenWRT 18.06+światełko 150/150 Mb/s
Asus RT-AC68UvE1 + RMerlin + Entware
Netgear WNR3500Lv2 + DDWRT
|
| |
|
|
| shibby |
Dodano 23-03-2015 23:07
|
SysOp
Posty: 17110
Dołączył: 15/01/2009 20:30
|
ten link można porównać do http://adres/phpmyadmin który to jest dostępny w 99% serwerów. Dane na roota są przecież inne niż do GUI/SSH. Nie uważam tego w sumie za bug.
Możesz spróbować zablokować dostęp do tego pliku przez custom configuration.
Router: Unifi Cloud Gateway Max
Switch: Netgear MS510TXPP
Switch: Unifi USW-Flex-Mini - szt. 2
Wi-Fi: Unifi U6-Lite - szt. 2
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 3x 2TB SSD, Intel X710-DA2 SFP+
VM #1: Synology SA6400
VM #2: Debian, WWW
VM #3: Home Assistant OS
|
| |
|
|
| Steel_Rat |
Dodano 23-03-2015 23:54
|
OL Maniac
Posty: 1831
Dołączył: 29/05/2011 22:24
|
Ok. Szkoda tylko, że nie ma tatiej możliwości blokady z zewnątrz. Ja dla phpmyadmina zrobiłem utworzyłem dodatkowy serwer na innym porcie nie widocznym z zewnątrz.
WRT3200ACN (WRT32X) + OpenWRT 18.06+światełko 150/150 Mb/s
Asus RT-AC68UvE1 + RMerlin + Entware
Netgear WNR3500Lv2 + DDWRT
|
| |
|
|
| vfiuchcikicshuusrch |
Dodano 24-03-2015 07:02
|
User
Posty: 66
Dołączył: 07/10/2014 14:31
|
I installed the new 128 version, I seem lost all information on a flash card.
it not to be read at all. 
I can't corrent configure wan web.
I already cleaned nvram settings.
router, can't see usb flash, while i not restart usb core support.
after restart /dev/sda appears.
but only /dev/sda, not /dev/sda1 and so on..
fdisk /dev/sda say that can't read device...
Asus RT-AC56U + FreshTomato-ARM-2019.3.220-beta-AIO
|
| |
|
|
| dar3k |
Dodano 24-03-2015 07:15
|
Super User
Posty: 419
Dołączył: 29/11/2013 22:48
|
Can you show us
fdisk -l
ER-12 + 4x UAP-AC-PRO
|
| |
|
|
| vfiuchcikicshuusrch |
Dodano 24-03-2015 07:25
|
User
Posty: 66
Dołączył: 07/10/2014 14:31
|
nothing show. empty.
today wil format usb flash on PC if it can format it.
Asus RT-AC56U + FreshTomato-ARM-2019.3.220-beta-AIO
|
| |
|
|
| qrs |
Dodano 24-03-2015 07:44
|
Maxi User
Posty: 749
Dołączył: 02/12/2012 00:55
|
shibby, w admin-access.asp brakuje zakładki m. in Web Server
Połączony z 24 March 2015 08:16:16:
--
cokolwiek chcę zrobić w adminerze (dodać bazę, tabelę, usera) zwraca mi błąd "Access denied"
Edytowany przez qrs dnia 24-03-2015 08:16
---
Netgear R7000 • Netgear WNR3500L v2 • MikroTik hAP ac^2 • TP-LINK M7650
|
| |
|
|
| shibby |
Dodano 24-03-2015 09:27
|
SysOp
Posty: 17110
Dołączył: 15/01/2009 20:30
|
masz zaznaczoną opcję by ci zresetował hasło na roota?
Spróbuj zalogować się przez konsolę: mysql -p
i zobacz czy tam możesz robić podstawowe rzeczy.
Router: Unifi Cloud Gateway Max
Switch: Netgear MS510TXPP
Switch: Unifi USW-Flex-Mini - szt. 2
Wi-Fi: Unifi U6-Lite - szt. 2
Proxmox VE: i5-13400T, 64GB RAM, 2x 512GB NVMe, 3x 2TB SSD, Intel X710-DA2 SFP+
VM #1: Synology SA6400
VM #2: Debian, WWW
VM #3: Home Assistant OS
|
| |
|
|
| vfiuchcikicshuusrch |
Dodano 24-03-2015 17:59
|
User
Posty: 66
Dołączył: 07/10/2014 14:31
|
usb flash works fine if I use usb2.0 port. =\ whats wrong?!
Asus RT-AC56U + FreshTomato-ARM-2019.3.220-beta-AIO
|
| |
|
|
| qrs |
Dodano 24-03-2015 18:52
|
Maxi User
Posty: 749
Dołączył: 02/12/2012 00:55
|
przy zaznaczeniu "Re-init root password" wszystko OK
---
Netgear R7000 • Netgear WNR3500L v2 • MikroTik hAP ac^2 • TP-LINK M7650
|
| |
|
|
| jack78 |
Dodano 24-03-2015 19:41
|
OL Maniac
Posty: 1365
Dołączył: 22/04/2007 22:28
|
Powracam do tematu Tomato i modemo routera MF60.
Byłem dziś u kumpla, zaktualizowałem soft do v124 i nadal niestety bez efektów.
Jan 1 01:00:11 unknown user.info kernel: Initializing USB Mass Storage driver...
Jan 1 01:00:11 unknown user.info kernel: usbcore: registered new interface driver usb-storage
Jan 1 01:00:11 unknown user.info kernel: USB Mass Storage support registered.
Jan 1 01:00:12 unknown user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 01:00:12 unknown user.debug kernel: PCI: Setting latency timer of device 0000:00:03.1 to 64
Jan 1 01:00:12 unknown user.info kernel: ehci_hcd 0000:00:03.1: EHCI Host Controller
Jan 1 01:00:12 unknown user.info kernel: ehci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 1
Jan 1 01:00:12 unknown user.info kernel: ehci_hcd 0000:00:03.1: irq 6, io mem 0x18003800
Jan 1 01:00:12 unknown user.info kernel: ehci_hcd 0000:00:03.1: USB 0.0 started, EHCI 1.00
Jan 1 01:00:12 unknown user.info kernel: usb usb1: configuration #1 chosen from 1 choice
Jan 1 01:00:12 unknown user.info kernel: hub 1-0:1.0: USB hub found
Jan 1 01:00:12 unknown user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 01:00:12 unknown user.info kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2
Jan 1 01:00:12 unknown user.info kernel: usb 1-1: configuration #1 chosen from 1 choice
Jan 1 01:00:12 unknown user.info kernel: hub 1-1:1.0: USB hub found
Jan 1 01:00:12 unknown user.info kernel: hub 1-1:1.0: 2 ports detected
Jan 1 01:00:12 unknown user.debug hotplug[375]: Attached USB device 1-1:1.0 [INTERFACE=9/0/0 PRODUCT=424/2502/1]
Jan 1 01:00:12 unknown user.debug hotplug[361]: Attached USB device 1-0:1.0 [INTERFACE=9/0/0 PRODUCT=1d6b/2/206]
Jan 1 01:00:12 unknown user.info kernel: usb 1-1.1: new high speed USB device using ehci_hcd and address 3
Jan 1 01:00:12 unknown user.info kernel: usb 1-1.1: configuration #1 chosen from 1 choice
Jan 1 01:00:12 unknown user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 01:00:13 unknown user.debug hotplug[401]: Attached USB device 1-1.1:1.0 [INTERFACE=8/6/80 PRODUCT=19d2/1225/f01d]
Jan 1 01:00:13 unknown user.debug kernel: vlan0: add 33:33:00:00:00:01 mcast address to master interface
Jan 1 01:00:13 unknown user.debug kernel: vlan0: add 01:00:5e:00:00:01 mcast address to master interface
Jan 1 01:00:13 unknown user.info kernel: vlan0: dev_set_allmulti(master, 1)
Jan 1 01:00:13 unknown user.info kernel: vlan0: dev_set_promiscuity(master, 1)
Jan 1 01:00:13 unknown user.info kernel: device eth0 entered promiscuous mode
Jan 1 01:00:13 unknown user.info kernel: device vlan0 entered promiscuous mode
Jan 1 01:00:13 unknown user.info kernel: br0: port 1(vlan0) entering forwarding state
Jan 1 01:00:14 unknown user.info kernel: IMQ starting with 2 devices...
Jan 1 01:00:14 unknown user.info kernel: IMQ driver loaded successfully.
Jan 1 01:00:14 unknown user.info kernel: Hooking IMQ after NAT on PREROUTING.
Jan 1 01:00:14 unknown user.info kernel: Hooking IMQ before NAT on POSTROUTING.
Jan 1 01:00:15 unknown user.notice kernel: scsi 0:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2
Jan 1 01:00:15 unknown user.notice kernel: scsi 0:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2
Jan 1 01:00:15 unknown user.notice kernel: sd 0:0:0:1: [sda] Attached SCSI removable disk
Jan 1 01:00:16 unknown user.info kernel: usb 1-1.1: USB disconnect, address 3
Jan 1 01:00:16 unknown user.info kernel: usb 1-1.1: new high speed USB device using ehci_hcd and address 4
Jan 1 01:00:16 unknown user.info kernel: usb 1-1.1: configuration #1 chosen from 1 choice
Jan 1 01:00:17 unknown user.info kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan 1 01:00:17 unknown authpriv.warn dropbear[530]: Failed loading /etc/dropbear/dropbear_ecdsa_host_key
Jan 1 01:00:17 unknown authpriv.info dropbear[540]: Running in background
Jan 1 01:00:17 unknown user.debug hotplug[554]: Attached USB device 1-1.1:1.1 [INTERFACE=10/0/0 PRODUCT=19d2/1405/f01d]
Jan 1 01:00:17 unknown user.debug hotplug[553]: Attached USB device 1-1.1:1.0 [INTERFACE=2/6/0 PRODUCT=19d2/1405/f01d]
Jan 1 01:00:17 unknown user.debug hotplug[561]: Attached USB device 1-1.1:1.2 [INTERFACE=8/6/80 PRODUCT=19d2/1405/f01d]
Jan 1 01:00:18 unknown daemon.info dnsmasq[579]: started, version 2.71 cachesize 1500
Jan 1 01:00:18 unknown daemon.info dnsmasq[579]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset Tomato-helper auth no-DNSSEC
Jan 1 01:00:18 unknown daemon.info dnsmasq[579]: asynchronous logging enabled, queue limit is 5 messages
Jan 1 01:00:18 unknown daemon.info dnsmasq-dhcp[579]: DHCP, IP range 192.168.1.2 -- 192.168.1.51, lease time 1d
Jan 1 01:00:18 unknown daemon.warn dnsmasq[579]: failed to access /etc/resolv.dnsmasq: No such file or directory
Jan 1 01:00:18 unknown daemon.info dnsmasq[579]: read /etc/hosts - 2 addresses
Jan 1 01:00:18 unknown daemon.info dnsmasq[579]: read /etc/dnsmasq/hosts/hosts - 3 addresses
Jan 1 01:00:18 unknown daemon.info dnsmasq-dhcp[579]: read /etc/dnsmasq/dhcp/dhcp-hosts
Jan 1 01:00:18 unknown user.debug init[1]: starting rstats.
Jan 1 01:00:18 unknown user.debug init[1]: starting cstats.
Jan 1 01:00:19 unknown user.notice kernel: scsi 1:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2
Jan 1 01:00:19 unknown user.notice kernel: scsi 1:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2
Jan 1 01:00:19 unknown user.notice kernel: sd 1:0:0:1: [sda] Attached SCSI removable disk
Jan 1 01:00:21 unknown user.debug dhcpc-event[608]: 182: pptp peerdns disabled
Jan 1 01:00:21 unknown daemon.info dnsmasq[579]: reading /etc/resolv.dnsmasq
Jan 1 01:00:21 unknown daemon.info dnsmasq[579]: using nameserver 192.168.0.1#53
Jan 1 01:00:33 unknown user.notice root: Transmission daemon successfully stoped
Jan 1 01:00:33 unknown user.info init[1]: Asus WL-500gP v2: Tomato 1.28.0000 MIPSR1-124 K26 USB BTgui-VPN
Jan 1 01:00:33 unknown user.debug init[1]: 182: pptp peerdns disabled
Jan 1 01:00:33 unknown daemon.info dnsmasq[579]: reading /etc/resolv.dnsmasq
Jan 1 01:00:33 unknown daemon.info dnsmasq[579]: using nameserver 192.168.0.1#53
Jan 1 01:00:33 unknown daemon.info dnsmasq[579]: exiting on receipt of SIGTERM
Jan 1 01:00:33 unknown daemon.info dnsmasq[641]: started, version 2.71 cachesize 1500
Jan 1 01:00:33 unknown daemon.info dnsmasq[641]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset Tomato-helper auth no-DNSSEC
Jan 1 01:00:33 unknown daemon.info dnsmasq[641]: asynchronous logging enabled, queue limit is 5 messages
Jan 1 01:00:33 unknown daemon.info dnsmasq-dhcp[641]: DHCP, IP range 192.168.1.2 -- 192.168.1.51, lease time 1d
Jan 1 01:00:33 unknown daemon.info dnsmasq[641]: reading /etc/resolv.dnsmasq
Jan 1 01:00:33 unknown daemon.info dnsmasq[641]: using nameserver 192.168.0.1#53
Jan 1 01:00:33 unknown daemon.info dnsmasq[641]: read /etc/hosts - 2 addresses
Jan 1 01:00:33 unknown daemon.info dnsmasq[641]: read /etc/dnsmasq/hosts/hosts - 3 addresses
Jan 1 01:00:33 unknown daemon.info dnsmasq-dhcp[641]: read /etc/dnsmasq/dhcp/dhcp-hosts
Mar 24 16:52:04 unknown cron.err crond[585]: time disparity of 23786871 minutes detected
Mar 24 16:52:26 unknown user.notice root: Transmission daemon successfully stoped
Mar 24 16:52:27 unknown user.debug init[1]: rstats stopped.
Mar 24 16:52:27 unknown user.debug init[1]: cstats stopped.
Mar 24 16:52:27 unknown daemon.warn dnsmasq[641]: no servers found in /etc/resolv.dnsmasq, will retry
Mar 24 16:52:27 unknown daemon.info dnsmasq[641]: exiting on receipt of SIGTERM
Mar 24 16:52:27 unknown user.debug init[1]: 182: pptp peerdns disabled
Mar 24 16:52:28 unknown daemon.info dnsmasq[1933]: started, version 2.71 cachesize 1500
Mar 24 16:52:28 unknown daemon.info dnsmasq[1933]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset Tomato-helper auth no-DNSSEC
Mar 24 16:52:28 unknown daemon.info dnsmasq[1933]: asynchronous logging enabled, queue limit is 5 messages
Mar 24 16:52:28 unknown daemon.info dnsmasq-dhcp[1933]: DHCP, IP range 192.168.1.2 -- 192.168.1.51, lease time 1d
Mar 24 16:52:28 unknown daemon.info dnsmasq[1933]: reading /etc/resolv.dnsmasq
Mar 24 16:52:28 unknown daemon.info dnsmasq[1933]: using nameserver 192.168.0.1#53
Mar 24 16:52:28 unknown daemon.info dnsmasq[1933]: read /etc/hosts - 2 addresses
Mar 24 16:52:28 unknown daemon.info dnsmasq[1933]: read /etc/dnsmasq/hosts/hosts - 3 addresses
Mar 24 16:52:28 unknown daemon.info dnsmasq-dhcp[1933]: read /etc/dnsmasq/dhcp/dhcp-hosts
Mar 24 16:52:30 unknown user.info kernel: br0: port 1(vlan0) entering disabled state
Mar 24 16:52:31 unknown user.debug kernel: vlan0: del 01:00:5e:00:00:01 mcast address from vlan interface
Mar 24 16:52:31 unknown user.debug kernel: vlan0: del 01:00:5e:00:00:01 mcast address from master interface
Mar 24 16:52:31 unknown user.debug kernel: vlan0: del 33:33:00:00:00:01 mcast address from vlan interface
Mar 24 16:52:31 unknown user.debug kernel: vlan0: del 33:33:00:00:00:01 mcast address from master interface
Mar 24 16:52:31 unknown user.info kernel: device vlan0 left promiscuous mode
Mar 24 16:52:31 unknown user.info kernel: br0: port 1(vlan0) entering disabled state
Mar 24 16:52:31 unknown daemon.warn dnsmasq[1933]: no servers found in /etc/resolv.dnsmasq, will retry
Mar 24 16:52:31 unknown user.notice kernel: klogd: exiting
Mar 24 16:52:31 unknown syslog.info syslogd exiting
Mar 24 16:52:31 unknown syslog.info syslogd started: BusyBox v1.21.1
Mar 24 16:52:31 unknown user.notice kernel: klogd started: BusyBox v1.21.1 (2014-12-24 08:07:22 CET)
Mar 24 16:52:32 unknown user.debug kernel: vlan0: add 33:33:00:00:00:01 mcast address to master interface
Mar 24 16:52:32 unknown user.debug kernel: vlan0: add 01:00:5e:00:00:01 mcast address to master interface
Mar 24 16:52:33 unknown user.info kernel: device eth1 entered promiscuous mode
Mar 24 16:52:33 unknown user.info kernel: br0: port 2(eth1) entering forwarding state
Mar 24 16:52:33 unknown user.info kernel: br0: port 1(vlan0) entering forwarding state
Mar 24 16:52:33 unknown user.warn kernel: vlan1: Setting MAC address to 48 5b 39 e7 df 59.
Mar 24 16:52:33 unknown user.debug kernel: vlan1: add 33:33:00:00:00:01 mcast address to master interface
Mar 24 16:52:33 unknown user.debug kernel: vlan1: add 01:00:5e:00:00:01 mcast address to master interface
Mar 24 16:52:34 unknown daemon.err pppd[2153]: In file /tmp/ppp/wanoptions: unrecognized option '/dev/ttyUSB0'
Mar 24 16:52:35 unknown user.info redial[2155]: Started. Time: 10
Mar 24 16:52:35 unknown daemon.info dnsmasq[1933]: exiting on receipt of SIGTERM
Mar 24 16:52:35 unknown daemon.info dnsmasq[2210]: started, version 2.71 cachesize 1500
Mar 24 16:52:35 unknown daemon.info dnsmasq[2210]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset Tomato-helper auth no-DNSSEC
Mar 24 16:52:35 unknown daemon.info dnsmasq[2210]: asynchronous logging enabled, queue limit is 5 messages
Mar 24 16:52:35 unknown daemon.info dnsmasq-dhcp[2210]: DHCP, IP range 192.168.1.2 -- 192.168.1.51, lease time 1d
Mar 24 16:52:35 unknown daemon.warn dnsmasq[2210]: no servers found in /etc/resolv.dnsmasq, will retry
Mar 24 16:52:35 unknown daemon.info dnsmasq[2210]: read /etc/hosts - 2 addresses
Mar 24 16:52:35 unknown daemon.info dnsmasq[2210]: read /etc/dnsmasq/hosts/hosts - 3 addresses
Mar 24 16:52:35 unknown daemon.info dnsmasq-dhcp[2210]: read /etc/dnsmasq/dhcp/dhcp-hosts
Mar 24 16:52:35 unknown user.debug init[1]: starting cstats.
Mar 24 16:52:37 unknown user.notice root: Transmission daemon successfully stoped
Mar 24 16:52:37 unknown user.info init[1]: Asus WL-500gP v2: Tomato 1.28.0000 MIPSR1-124 K26 USB BTgui-VPN
Mar 24 16:52:37 unknown user.info kernel: usbcore: registered new interface driver cdc_acm
Mar 24 16:52:37 unknown user.info kernel: drivers/usb/class/cdc-acm.c: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
Mar 24 16:52:37 unknown user.info kernel: usbcore: registered new interface driver usbserial
Mar 24 16:52:37 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
Mar 24 16:52:37 unknown user.info kernel: usbcore: registered new interface driver usbserial_generic
Mar 24 16:52:37 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
Mar 24 16:52:37 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
Mar 24 16:52:37 unknown user.info kernel: usbcore: registered new interface driver option
Mar 24 16:52:38 unknown user.info kernel: drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.2
Mar 24 16:52:38 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra USB modem
Mar 24 16:52:38 unknown user.info kernel: usbcore: registered new interface driver sierra
Mar 24 16:52:38 unknown user.info kernel: drivers/usb/serial/sierra.c: USB Driver for Sierra Wireless USB modems: v.1.7.0
Mar 24 16:52:40 unknown user.notice root: 3G MODEM not found by cdc-acm, option or sierra module. Trying usbserial ...
Mar 24 16:52:40 unknown user.info kernel: usbcore: deregistering interface driver sierra
Mar 24 16:52:40 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial deregistering driver Sierra USB modem
Mar 24 16:52:40 unknown user.info kernel: usbcore: deregistering interface driver option
Mar 24 16:52:40 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial deregistering driver GSM modem (1-port)
Mar 24 16:52:40 unknown user.info kernel: usbcore: deregistering interface driver usbserial_generic
Mar 24 16:52:40 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial deregistering driver generic
Mar 24 16:52:40 unknown user.info kernel: usbcore: deregistering interface driver usbserial
Mar 24 16:52:40 unknown user.info kernel: usbcore: deregistering interface driver cdc_acm
Mar 24 16:52:40 unknown user.info kernel: usbcore: registered new interface driver usbserial
Mar 24 16:52:40 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
Mar 24 16:52:40 unknown user.err kernel: usbserial_generic 1-1.1:1.0: Generic device with no bulk out, not allowed.
Mar 24 16:52:40 unknown user.warn kernel: usbserial_generic: probe of 1-1.1:1.0 failed with error -5
Mar 24 16:52:41 unknown user.err kernel: usbserial_generic 1-1.1:1.1: Generic device with no bulk out, not allowed.
Mar 24 16:52:41 unknown user.warn kernel: usbserial_generic: probe of 1-1.1:1.1 failed with error -5
Mar 24 16:52:41 unknown user.info kernel: usbcore: registered new interface driver usbserial_generic
Mar 24 16:52:41 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
Mar 24 16:52:41 unknown user.info kernel: usbcore: deregistering interface driver usbserial_generic
Mar 24 16:52:41 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial deregistering driver generic
Mar 24 16:52:41 unknown user.info kernel: usbcore: deregistering interface driver usbserial
Mar 24 16:52:41 unknown user.info kernel: usbcore: registered new interface driver usbserial
Mar 24 16:52:41 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
Mar 24 16:52:41 unknown user.info kernel: usbcore: registered new interface driver usbserial_generic
Mar 24 16:52:41 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
Mar 24 16:52:41 unknown user.info kernel: usbcore: deregistering interface driver usbserial_generic
Mar 24 16:52:41 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial deregistering driver generic
Mar 24 16:52:41 unknown user.info kernel: usbcore: deregistering interface driver usbserial
Mar 24 16:52:41 unknown user.info kernel: usbcore: registered new interface driver usbserial
Mar 24 16:52:41 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
Mar 24 16:52:41 unknown user.info kernel: usbcore: registered new interface driver usbserial_generic
Mar 24 16:52:41 unknown user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
Mar 24 16:52:41 unknown user.notice root: 3G MODEM not found ... sorry
Mar 24 16:52:41 unknown user.notice root: 3G MODEM Signal Strength: -113 dBm
Mar 24 16:52:55 unknown user.info redial[2155]: WAN down. Reconnecting...
Mar 24 16:52:55 unknown daemon.info dnsmasq[2210]: exiting on receipt of SIGTERM
Mar 24 16:52:55 unknown user.debug init[1]: 182: pptp peerdns disabled
Mikrotik hAP ac2
UniFi AP AC v2-OFW, UniFi AP PRO- OpenWRT,
Linksys E1000v2 - Tomato-RT-N5x-MIPSR2-116-Hyzoom.4M-Mini
Tenda AC10 - AC1200 OFW
NAS - HP Microserver Gen8 i3-3220T, 8GB RAM 5x 3TB WD RED | Xpenology
|
| |
|
|
| stelma |
Dodano 24-03-2015 23:25
|
User
Posty: 7
Dołączył: 24/03/2015 22:45
|
Witam. Mam rt-n16. Wcześniej ofw. Teraz na szczęście tomato-K26USB-1.28.RT-N5x-MIPSR2-116-PL-AIO. Czy wiadomo kiedy będzie nowa wersja Shibby aio po polsku na moje urzadzenie? Mój kłopot to dodawanie do samby tego samego zasobu dla kilku użytkowników z różnymi uprawnieniami(w ftp jest perfekt). W moim się nie da. Jeśli jest jakiś sposób to go nie znalazłem. Po drugie to nie jestem w stanie stwierdzić czy TomatoAnon jest włączone czy nie. Checkbox się zaznacza i odznacza, ale jak dam zapisz to wraca tak jak było czyli zaznaczone. Z całym szacunkiem dla Shibby-ego jest to najlepsze co mogło spotkać moj rt-n16 z moimi umiejętnościami lecz czy da się te dwie rzeczy poprawić ?
|
| |
|
|
| ovner |
Dodano 25-03-2015 08:15
|
Power User
Posty: 368
Dołączył: 15/08/2009 21:34
|
@stelma polskich wydań raczej bym się nie spodziewał, szkoda marnować cenny czas na tłumaczenia, jak w szybkim tempie idzie do przodu rozwój tomatoARM.
Przejście z PL na EN i odwrotnie nie jest bezproblemowe np. uprawnienia FTP trzeba użytkownikom na nowo nadawać i zapisywać.
TUF-AX5400 @ Firmware:388.1_0-gnuton1
RT-N16 @ FreshTomato Firmware 2023.3 MIPSR2 K26 USB VPN + Huawei e3372 no-hilink
 |
| |
|
|
| stelma |
Dodano 25-03-2015 09:13
|
User
Posty: 7
Dołączył: 24/03/2015 22:45
|
Rozumiem, że jest to problem z językiem(choć Shibby jest chyba Polakiem). Lecz czy można się spodziewać naprawy związanej z sambą tak jak jest to w ftp?
stelma załączono następujące plik:
Nie masz uprawnień, by zobaczyć załączniki w tym wątku.
|
| |
|
|
| PawelM78 |
Dodano 25-03-2015 10:10
|
User
Posty: 106
Dołączył: 18/01/2012 19:08
|
trochę się już pogubiłem w wersjach, może mi ktoś podpowie jaką wersję mam wgrać na Asusa RT-N66U
1.24 czy 1.28?
w katalogu http://tomato.groov.pl/download/K26RT-N/ jest tylko wersja 1.24 a na Asusie widzę info Tomato by Shibby v128 is now available. Click here to read more.
2x ASUS RT-N66U + Tomato by Shibby VPN(Nka)
|
| |
|
|
| compsjp |
Dodano 25-03-2015 10:46
|
User
Posty: 70
Dołączył: 25/05/2014 17:38
|
wheres the k24/k26/rt-n 128? if not out, fix your anon tomato version then man..... ignore this too i bet.. all my devices (k26/rt-n both say 128 is out, but your downloads only show 124 man. 
1 RT-AC68U 128 SHIBBY AIO ARM
1 RT-N16 128 SHIBBY AIO K26
1 RT-N12(B1) DD-WRT v24-sp2 (05/27/13) mega
SOLD 1 rt-n12 128 SHIBBY MINI-IPV6
1 WNR2000V2 MIPSR2-128 K26 Mini ipv6
1 WNR2000V3 OpenWrt Barrier Breaker 14.07 / LuCI 0.12 Branch (0.12+git-15.
|
| |
|
|
| b3rok |
Dodano 25-03-2015 10:47
|
Administrator
Posty: 621
Dołączył: 10/01/2008 18:40
|
@PawelM78
http://tomato.groov.pl/?page_id=164 tu jest rozpiska:
K24 - Kernel 2.4 - ND builds, MIPSR1 - for older Linksys WRT54 series, Asus WL500GP and Dlink DIR-320
K26 - Kernel 2.6, MIPSR2- newer routers like RT-N16, E2000, E3000, E4200 (without 5GHz), WNR3500Lv1 etc. Older MIPSR1 routers are also supported
K26RT-N - MIPSR2 - special builds for E4200, RT-N10U, RT-N12B1/C1, RT-N15U, RT-N53, RT-N66U, WNR3500Lv2 and newer Linksys E-series routers
K26RT-AC - MIPSR2 - SDK6.x, special builds for RT-N66U, RT-AC66U and Tenda W1800R only
K26ARM - ARM - only for Broadcom-ARM based routers like: Asus RT-N18U, RT-AC56U, RT-AC68U, RT-AC68R, Netgear R7000, R6300v2, R6250, D-Link DIR868L
A na shoutboxie masz info od kille72: " v.126/128 MIPSEL usuniety z serwera, problemy z https, nie generuje się certyfikat."
I. Huawei HG8240 + 1x Netgear r7000 @FreshTomato + Synology DS1512+
II. TP-Link TL-WDR4300 @Obsy OpenWRT Gargoyle
III. TP-Link TL-WDR3600 @Obsy OpenWRT Gargyle
|
| |
|
' target='_blank'>Link
