# sane-find-scanner will now attempt to detect your scanner. If the

  # result is different from what you expected, first make sure your

  # scanner is powered up and properly connected to your computer.



  # No SCSI scanners found. If you expected something different, make sure that

  # you have loaded a kernel SCSI driver for your SCSI adapter.

  # Also you need support for SCSI Generic (sg) in your operating system.

  # If using Linux, try "modprobe sg".



found USB scanner (vendor=0x03f0 [HP], product=0x5b11 [Officejet J5700 series]) at libusb:001:047

  # Your USB scanner was (probably) detected. It may or may not be supported by

  # SANE. Try scanimage -L and read the backend's manpage.



  # Not checking for parallel port scanners.



  # Most Scanners connected to the parallel port or other proprietary ports

  # can't be detected by this program.

device `hpaio:/usb/Officejet_J5700_series?serial=CN7BCCW1YG04TC' is a Hewlett-Packard Officejet_J5700_series all-in-one

scanimage: scanning image of size 638x1125 pixels at 24 bits/pixel

scanimage: acquiring RGB frame, 8 bits/sample

scanimage: reading one scanline, 1914 bytes...  PASS

scanimage: reading one byte...          PASS

scanimage: stepped read, 2 bytes...     PASS

scanimage: stepped read, 4 bytes...     PASS

scanimage: stepped read, 8 bytes...     PASS

scanimage: stepped read, 16 bytes...    PASS

scanimage: stepped read, 32 bytes...    PASS

scanimage: stepped read, 64 bytes...    PASS

scanimage: stepped read, 128 bytes...   PASS

scanimage: stepped read, 256 bytes...   PASS

scanimage: stepped read, 512 bytes...   PASS

scanimage: stepped read, 1024 bytes...  PASS

scanimage: stepped read, 2048 bytes...  PASS

scanimage: stepped read, 2047 bytes...  PASS

scanimage: stepped read, 1023 bytes...  PASS

scanimage: stepped read, 511 bytes...   PASS

scanimage: stepped read, 255 bytes...   PASS

scanimage: stepped read, 127 bytes...   PASS

scanimage: stepped read, 63 bytes...    PASS

scanimage: stepped read, 31 bytes...    PASS

scanimage: stepped read, 15 bytes...    PASS

scanimage: stepped read, 7 bytes...     PASS

scanimage: stepped read, 3 bytes...     PASS

service saned

{

port = 6566

socket_type = stream

server = /opt/sbin/saned

protocol = tcp

user = root

group = root

wait = no

disable = no

}

# Copyright 1999-2004 Gentoo Foundation

# Distributed under the terms of the GNU General Public License v2

# Sample configuration file for xinetd



defaults

{

        only_from      = 192.168.2.0/24

        instances      = 60

        log_type = FILE /opt/var/xinetd.log

        log_on_success = HOST PID

        log_on_failure = HOST

        cps = 25 30

}



includedir /opt/etc/xinetd.d

# saned.conf

# Configuration for the saned daemon



## Daemon options

# Port range for the data connection. Choose a range inside [1024 - 65535].

# Avoid specifying too large a range, for performance reasons.

#

# ONLY use this if your saned server is sitting behind a firewall. If your

# firewall is a Linux machine, we strongly recommend using the

# Netfilter nf_conntrack_sane connection tracking module instead.

#

# data_portrange = 10000 - 10100





## Access list

# A list of host names, IP addresses or IP subnets (CIDR notation) that

# are permitted to use local SANE devices. IPv6 addresses must be enclosed

# in brackets, and should always be specified in their compressed form.

#

# The hostname matching is not case-sensitive.

#scan-client.somedomain.firm

#192.168.0.1

#192.168.0.1/29

#[2001:7a8:185e::42:12]

#[2001:7a8:185e::42:12]/64





# NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and

# /etc/services must also be properly configured to start

# the saned daemon as documented in saned(8), services(4)

# and inetd.conf(4) (or xinetd.conf(5)).

192.168.2.0/24

1010 root      1008 S    eapd

 1013 root      1112 S    nas

 1018 root      1456 S    zebra -d

 1020 root      1540 S    ripd -d

 1022 nobody    1064 S    dnsmasq -c 1500 --log-async

 1026 root      2724 S    httpd

 1028 root      1608 S    crond -l 9

 1030 root       952 S    rstats

 1035 root      1144 S    cstats

 1045 root       648 S    pptpd -c /tmp/pptpd/pptpd.conf -o /tmp/pptpd/options

 1046 root       656 R    /usr/sbin/bcrelay -i ppp[4-9].* -o br0 -n

 1443 root      1452 S    xinetd

 6487 root      1152 R    dropbear -p 22 -p 8080 -a

 6488 root      1600 S    -sh

 6605 root      1592 R    ps

13/9/12@13:46:01: START: saned pid=2721 from=192.168.2.59

13/9/12@13:46:52: START: saned pid=2722 from=192.168.2.59

13/9/12@13:48:15: START: saned pid=2795 from=192.168.2.59

13/9/12@13:48:36: START: saned pid=2796 from=192.168.2.59

13/9/12@13:49:42: START: saned pid=2869 from=192.168.2.59

13/9/12@13:49:56: START: saned pid=2870 from=192.168.2.59

13/9/12@13:56:05: START: saned pid=1447 from=192.168.2.59

13/9/12@13:56:28: START: saned pid=1456 from=192.168.2.59

13/9/12@14:10:45: START: saned pid=1818 from=192.168.2.59

13/9/12@14:12:53: START: saned pid=1934 from=192.168.2.59

13/9/12@16:47:56: START: saned pid=2162 from=192.168.2.59

13/9/12@16:49:59: START: saned pid=2259 from=192.168.2.59

Sep 13 17:23:52 Bohunowy-router-2 authpriv.info dropbear[6487]: Child connection from 192.168.2.59:1458

Sep 13 17:23:59 Bohunowy-router-2 authpriv.notice dropbear[6487]: Password auth succeeded for 'root' from 192.168.2.59:1458

Sep 13 17:25:45 Bohunowy-router-2 user.info kernel: usb 1-1.2.2: new high speed USB device using ehci_hcd and address 13

Sep 13 17:25:45 Bohunowy-router-2 user.info kernel: usb 1-1.2.2: configuration #1 chosen from 1 choice

Sep 13 17:25:45 Bohunowy-router-2 user.info kernel: usblp0: USB Bidirectional printer dev 13 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5B11

Sep 13 17:25:45 Bohunowy-router-2 user.debug hotplug[6611]: Attached USB device 1-1.2.2:1.0 [INTERFACE=255/204/0 PRODUCT=3f0/5b11/100]

Sep 13 17:25:45 Bohunowy-router-2 user.debug hotplug[6614]: Attached USB device 1-1.2.2:1.1 [INTERFACE=7/1/2 PRODUCT=3f0/5b11/100]

Sep 13 17:25:45 Bohunowy-router-2 user.info kernel: Registered led device: 1-1.2.2

Sep 13 17:25:45 Bohunowy-router-2 user.debug hotplug[6620]: Attached USB device 1-1.2.2:1.2 [INTERFACE=255/255/255 PRODUCT=3f0/5b11/100]

Sep 13 17:26:22 Bohunowy-router-2 daemon.debug saned[6623]: saned (AF-indep+IPv6) from sane-backends 1.0.22 starting up

Sep 13 17:26:22 Bohunowy-router-2 daemon.debug saned[6623]: check_host: access by remote host: 192.168.2.59

Sep 13 17:26:22 Bohunowy-router-2 daemon.debug saned[6623]: init: access granted to Admin@192.168.2.59

[b]Sep 13 17:26:22 Bohunowy-router-2 daemon.err saned[6623]: scan/sane/io.c 53: dBus Connection Error (Failed to connect to socket /opt/var/run/dbus/system_bus_socket: Connection refused)![/b]

Sep 13 17:31:11 Bohunowy-router-2 daemon.info dnsmasq-dhcp[1022]: DHCPINFORM(br0) 192.168.2.59 c8:3a:35:d1:35:bf 

Sep 13 17:31:11 Bohunowy-router-2 daemon.info dnsmasq-dhcp[1022]: DHCPACK(br0) 192.168.2.59 c8:3a:35:d1:35:bf Bohun4

Sep 13 17:31:37 Bohunowy-router-2 daemon.debug saned[6623]: saned exiting

Sep 13 17:52:11 Bohunowy-router-2 daemon.info dnsmasq-dhcp[1022]: DHCPREQUEST(br0) 192.168.2.25 e4:d5:3d:20:5f:1b 

Sep 13 17:52:11 Bohunowy-router-2 daemon.info dnsmasq-dhcp[1022]: DHCPACK(br0) 192.168.2.25 e4:d5:3d:20:5f:1b Bohun3

Sep 13 17:52:11 Bohunowy-router-2 daemon.warn dnsmasq-dhcp[1022]: not giving name Bohun1 to the DHCP lease of 192.168.2.35 because the name exists in /etc/dnsmasq/hosts/hosts with address 192.168.2.3

Sep 13 18:00:01 Bohunowy-router-2 syslog.info root: -- MARK --